| Content |
Features Vocal Studio Pro II - M-Track USB Audio Interface
- (2) XLR+1/4” combo inputs with phantom power for recording vocals, guitars, bass, and more
- Zero-latency monitoring with USB/Analog Direct Balance control
- (2) Balanced 1/4” main outputs with dedicated level control
- Channel-specific LED VU meters provide real-time visual feedback of the audio signal
- Headphone out with independent level control for private recording and mixing
- USB-powered connectivity and solid metal construction for on-the-go use
- Studio-quality audio recording with up to 24-bit/48kHz resolution
- Includes Ableton Live Lite for recording, mixing, and producing music with your Mac or PC
- Use the included Waves plugin bundle (AudioTrack, Eddie Kramer Effects Channel, and TrueVerb) to add a professional finish to your production
- Large-Diaphragm Condenser Microphone
- Top quality condenser transducer
- High sensitivity and low self noise
- Built-in pre-amplifier circuitry for unrivaled sound performance
- Wide frequency response range
- Studio Headphones
- Large 50mm neodymium drivers for accuracy
- Earcups rotate on two axes for optimal fit
- Padded headband for comfort
- 9.9-foot (3m) single-sided, coiled cable
- Right-angle, 1/8" gold-plated, threaded mini-plug connector
- Gold-plated, threaded 1/4" connector also included
- Built-in cable strain relief for long life
Specifications - M-Audio Large Capsule Condenser Microphone
- Transducer Principle: Back Electret Condenser
- Directivity Characteristic: Cardioid
- Frequency Response: 30Hz - 20kHz
- Sensitivity: -38dB ±2dB (0dB=1V/Pa at 1kHz)
- Output Impedance: 200Ω ±30% (at 1kHz)
- Load Impedance: ≥1000Ω
- Equivalent Noise Level: ≤22dB A (IEC 581-5)
- Max. Input SPL: 140dB (THD ≤1.0ï¼… at 1kHz)
- Power Requirements: 48V DC Phantom Power
- Body Dimensions: Ø54 x 128mm
- Net Weight: 371 g
- M-Track Two-Channel USB Audio Interface
- Mic Inputs 1–2 (balanced XLR)
- Frequency Response: 20 Hz – 20 kHz (+/-0.1 dB)
- Dynamic Range: 104 dB (A-weighted)
- Signal-to-Noise Ratio: 104 dB (1 kHz, +1.4 dBu, A-weighted)
- THD+N: 0.003% (1 kHz, +2 dBu input, -0.8 dBFS)
- Preamp EIN:
- -133 dBu (max gain, 40 Ω source, A-weighted)
- -126 dBu (max gain, 150 Ω source, unweighted)
- Sensitivity: -53 dBu
- Gain Range: 55 dB
- Line Inputs 1–2 (balanced 1/4" [6.35 mm] TRS)
- Frequency Response: 20 Hz – 20 kHz (+/-0.1 dB)
- THD+N: 0.004% (1 kHz, -1 dBFS)
- Sensitivity: -43 dBu
- Gain Range: 55 dB
- Inst Input 2 (unbalanced 1/4" [6.35 mm] TS)
- Frequency Response: 20 Hz – 20 kHz (+/-0.1 dB)
- THD+N: 0.022% (1 kHz, -1 dBFS)
- Sensitivity: -47 dBu
- Input Impedance: 1 MΩ
- Gain Range: 55 dB
- Main Outputs, L and R (impedance-balanced 1/4" [6.35 mm] TRS)
- Frequency Response: 20 Hz – 20 kHz (+/-0.3 dB)
- Dynamic Range / Signal-to-Noise Ratio: 102 dB (A-weighted)
- THD+N: 0.008% (1 kHz, -1 dBFS)
- Max Output Level: +2.86 dBu
- Power: USB-bus-powered
- Size (H x W x D): 2.07 x 9.4 x 4.85 inches (52.58 x 238.76 x 123.19 mm)
- Weight: 2.29 lbs (1.04 kg)
- M-Audio Studio Headphones
- 32Ω impedance
- 1,000mW power-handling capacity
- Sensitivity: 102 ±3dB
- THD:
|
| Variable large diaphragm microphone | | Pressure-gradient transducer with double membrane capsule | | The studio microphone classic | | Three directional characteristics: omni, cardioid, figure-8 | | Switchable low frequency roll-off | | Switchable 10 dB pre-attenuation | |
Ideal as main and as support microphone in the most differing recording situations
| Acoustical operating principle | Pressure gradient transducer | | Directional pattern | Omnidirectional, cardioid, figure-8 plus | | Frequency range | 20 Hz ... 20 kHz | | Sensitivity at 1 kHz into 1 kohm | 20/28/22 mV/Pa1) | | Rated impedance | 200 ohms | | Rated load impedance | 1 kohms | | Equivalent noise level, CCIR2) | 26/23/25 dB1) | | Equivalent noise level, A-weighted2) | 15/12/14 dB-A1) | | Signal-to-noise ratio, CCIR2) (rel. 94 dB SPL) | 68/71/69 dB1) | | Signal-to-noise ratio, A-weighted2) (rel. 94 dB SPL) | 79/82/80 dB1) | | Maximum SPL for THD 0.5%3) | 117 dB (cardioid) | | Maximum SPL for THD 0.5% with preattenuation3) | 127 dB | | Maximum output voltage | 390 mV | | Dynamic range of the microphone amplifier (A-weighted) | 105 dB | | Supply voltage (P48, IEC 61938) | 48 V ± 4 V | | Current consumption (P48, IEC 61938) | 0.8 mA | | Matching connectors | XLR3F | | Weight | 500 g | | Diameter | 56 mm | | Length | 200 mm |
| |
| Acoustical operating principle | Pressure gradient transducer | | Directional pattern | Cardioid | | Frequency range | 20 Hz ... 20 kHz | | Sensitivity at 1 kHz into 1 kohm | 13 mV/Pa | | Rated impedance | 50 ohms | | Rated load impedance | 1000 ohms | | Equivalent noise level, CCIR1) | 23 dB | | Equivalent noise level, A-weighted1) | 12 dB-A | | Signal-to-noise ratio, CCIR1) (rel. 94 dB SPL) | 71 dB | | Signal-to-noise ratio, A-weighted1) (rel. 94 dB SPL) | 82 dB | | Maximum SPL for THD | 110 dB | | Maximum SPL for THD | 129 dB | | Maximum output voltage for THD | -1 dBu | | Dyn. range of the mic. amplifier /A-weighted, 0.5 %2)) | 98 dB | | Dyn. range of the mic. amplifier /A-weighted, 5 %2)) | 117 dB | | Supply voltage (P48, IEC 61938) | 48 V ± 4 V | | Current consumption (P48, IEC 61938) | 3.2 mA | | Matching connector | XLR 3F | | Weight | 825 g | | Diameter | 78 mm | | Length | 165 mm |
1) According to IEC 60268-1; CCIR-weighting according to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
2) Measured as equivalent el. input signal |
|
|
- Polar pattern: Cardioid
- Switchable -10dB PAD
- Frequency response: 20 - 20,000 Hz
- Max. SPL: 140/150 dB (THD = 0.5%)
- Electrical impedance: 200 Ohm
- Requires phantom power
- Diameter: 53 mm
- Length: 162 mm
- Net weight: 320 g
- Colour: Black
- Incl. shock mount
- Highly affordable AKG large-diaphragm microphone technology
- Cardioid polar pattern for multiplicity of vocal and instrument applications
The earlier model C 3000 has had a large fan club in the project studio and home recording worlds for years. For the new C 3000 B, AKG designed a special 1-inch large-diaphragm transducer that closely approximates the vibration performance of top-class studio microphones, but can be made at much lower cost.
Due to its surface area and special capsule tuning, the C 3000 B large-diaphragm transducer produces an exceptionally pleasing, smooth sound. Unlike in the C 3000, the switchable 10-dB preattenuation pad immediately follows the transducer in the signal path, thus increasing the C 3000 B\'s SPL capability by a true 10 dB. Loud sound sources are therefore no problem.
An acoustically optimized cardioid polar pattern makes the C 3000 B an excellent choice for both recording and live sound applications where high gain before feedback is paramount.
| Polar pattern |
cardioid |
| Frequency range |
20 to 20,000 Hz |
| Sensitivity |
25 mV/Pa (-32 dBV) |
| Max. SPL |
140/150 dB (k=0,5%) |
| Equivalent noise level (CCIR 468-3) |
25 dB |
| Equivalent noise level |
14 dB-A |
| Signal/noise ratio (A-weighted) |
80 dB |
| Preattenuation pad |
10 dB, switchable |
| Bass filter |
6 dB/octave below 500 Hz |
| Impedance |
200 ohms |
| Recommended load impedance |
>1000 ohms |
| Supply voltage |
9 to 52 V phantom power to DIN 45596 |
| Current consumption |
|
| Connector |
3-pin XLR |
| Finish |
silver gray |
| Net weight |
320 g / 11.3 oz. |
| Shipping weight |
950 g / 2.1 lbs. |
| Patent(s) |
Electrostatic transducer (Patent no. AT 395.225, DE 4.103.784, JP 2.815.488) |
|
Behringer B-5 Sputtered Diaphragm Studio Condenser Microphone
The B-5 is a professional gold-sputtered diaphragm condenser microphone featuring two interchangeable capsules for different pickup patterns (cardioid and omnidirectional). It is perfect for acoustic instruments, vocals and overhead miking. Its ultra low-noise transformerless FET input eliminates low frequency distortion. The -10 dB attenuator can be used with high volume signal sources, while the low-cut filter eliminates floor rumble. The microphone is delivered in a rugged hard case with stand adapter and windscreen.
|
|
|
|
|
|
|
Professional true condenser microphone for studio and live applications
|
|
|
2 interchangeable capsules with cardioid and omnidirectional pickup patterns
|
|
|
Low-mass gold sputtered diaphragm for ultimate sound reproduction
|
|
|
Perfect for acoustic instruments, voice and overhead etc.
|
|
|
Ultra low-noise transformerless FET input eliminates low-frequency distortion
|
|
Smooth, super-wide frequency response and incredible musicality
|
|
Switchable low-frequency roll-off and -10 dB input attenuation
|
|
Gold-plated 3-pin XLR output connector
|
|
Rugged construction with satin nickel-plated brass body
|
|
Custom microphone stand adapter, windscreen and transport case included
|
|
Manual Download | AKG C214 – large 1” diaphragm microphone with cardioid polar pattern, frequency response: 20Hz-20kHz, 20dB pad, requires phantom power (12-52V), XLR connector. Includes clip, case and windshield. Dimensions: 160 x 55mm. Weight: 280g, optional microphone holder SA61
The C214 professional large-diaphragm condenser microphone has been designed as a cost-effective alternative to the high-end C414 family. Like the C414, the C214 offers a supreme one-inch capsule on an integrated suspension to reduce mechanical noise. A switchable 20dB attenuation pad allows recording of loud sources of up to 156dB SPL. A switchable bass-cut filter allows close-up recording with almost no proximity effect.
The C214 captures sound by combining one capsule of the legendary C414 dual-capsule system and the patented AKG Back-Plate Technology, resulting in an outstanding performance close to the famous C414 XLII.
Sonic character of the C414 XLII
for beautifully detailed recording of lead vocals and solo instruments
Outstanding dynamic range and ultralow noise
for close-up recording of high-output sources of up to 156dB SPL
Switchable 20dB attenuator and bass-cut filter
for close-up recording and reduction of proximity effect
Integrated suspension
to reduce mechanical noise and vibration from stage
Roadworthy design
all-metal die-cast body with shock- and scratch-resistant finish |
Reviews
There are no reviews yet.