Configuration:2-Way System type:Active Studio Monitor Low-Frequency:8″ Aramid Glass Composite woofer Mid-Frequency:N/A High-Frequency:1″ soft dome tweeter Frequency Response:35Hz – 35kHz Max Peak SPL:109 dB Amplifier Class:Class A-B Power Output:100W High Frequency:25W Mid-Frequency:N/A Low Frequency:75W Input Impedance (Ohms):10 K Ohm balanced HF Level […]
Configuration:2-Way
System type:Active Studio Monitor
Low-Frequency:8" Aramid Glass Composite woofer
Mid-Frequency:N/A
High-Frequency:1" soft dome tweeter
Frequency Response:35Hz - 35kHz
Max Peak SPL:109 dB
Amplifier Class:Class A-B
Power Output:100W
High Frequency:25W
Mid-Frequency:N/A
Low Frequency:75W
Input Impedance (Ohms):10 K Ohm balanced
HF Level Adjust:-2dB, -1dB, 0, +1dB
System Volume:(-30dB - +6dB)
Indicators:Power
Input Connectors:
Unbalanced RCA
Balanced 1/4" TRS
Balanced XLR
Enclosure Construction:MDF
Finish:Black vinyl wrap
Port Configuration:Front firing slot port
Dimensions (D x W x H): 12.4" (315mm) x 10.8" (275mm) x 15.6" (396mm)
Weight:24.6 Lbs. (11.2 Kg.)
High-Resolution, Active 2-Way Reference Studio Monitor with 5.25" Kevlar Woofer
Ultra-linear studio monitor with true active design
Precision Class A/B amplifiers with active protection circuits: 50 W for LF / 25 W for HF
Ultra-high resolution, ferrofluid-cooled 1" dome tweeter for ultimate sound reproduction
Long-throw 5.25" woofer with deformation-resistant Kevlar cone for ultimate bass response
Ultimate dispersion characteristics and extremely large "sweet spot" owing to advanced wave guide technology
High-precision crossover network with 4th order Linkwitz-Riley filters
Adjustable to a wide range of acoustic conditions
Separately controlled limiter for low and high frequency overload protection
Magnetic shielding allows placement near computer monitors
“Planet Earth" power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
Servo-balanced inputs with XLR, 1/4" and unbalanced RCA connectors
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
PWM amplifiers.
The smallest reference speaker
The combined features of crystal clear resolution, tight and precise low-frequency reproduction and the effortless musical reproduction sets this speaker apart from all conventional designs.
The S1X is the first choice in all environments that require high quality within a small space, whether it is a smaller studio, an OB vehicle, or a 5.1 installation.
Woofer
Number
1
Basket Ø
6" (156 mm)
Voice coil Ø
1.5" (37 mm)
Cone material
HexaCone
Tweeter
Number
1
Type
X-ART
Diaphragm area
4 inch² (2420 mm²)
Equiv. Diaphragm Ø
2" (56 mm)
Velocity transform ratio
4:1
Diaphragm weight
0.17 g
Built-in Amplifiers
Woofer
1
Type
PWM
Amp. power RMS / music
200 W / 280 W
Tweeter
1
Type
A/B
Amp. power RMS / music
50 W / 100 W
Control panel
Input Sensitivity (coarse)
±10 dB
High Shelf EQ > 6 kHz
±6 dB
Low Shelf EQ
±6 dB
Tweeter gain
±4 dB
Input connectors
Analog
XLR
General data
Panel
Rear
Frequency response
40 Hz - 50 kHz
THD > 80 Hz
≤1.5 %
Long term output
≥103 dB
Max. peak
≥113 dB
Crossover frequencies
2200 Hz
Input impedance
10 KOhm
Weight
13.2 lb (6 kg)
Magnetically shielded
Optional
Height x Width x Depth
11.5" (295 mm) x 7" (175 mm) x 10" (260 mm)
Warranty
5 Years
Delivery contents
Power cord, Manual
The Genelec 8130A Digital Monitoring System has a 192 kHz/24 bit digital audio interface.
Due to its compact size, integrated construction, excellent dispersion and precise stereo
imaging, the 8130A is ideal for near field monitoring, mobile vans, digital audio workstations,
broadcast and TV control rooms, surround sound systems, home studios, multimedia
applications and also for use with computer soundcards. The Directivity Control Waveguide?
(DCW?) technology provides excellent frequency balance even in difficult acoustic
environments.
The integrated design allows the amplifiers and the drivers to be calibrated as a single unit,
eliminating the effects of component tolerances and ensuring consistent quality.
The all-aluminium Minimum Diffraction Enclosure? (MDE?) and advanced Directivity Control
Waveguide? (DCW?) technologies are carefully matched with advanced amplifier and electronics
circuitry. The low frequency response extends down to 55 Hz (-3 dB) while distortion is extremely
low due to a uniquely new rear reflex port design.
The 8130A has been specially designed to have a sufficient LF extension for most situations.
However if greater SPL's and a lower cutoff frequency are required, it can be complemented
with Genelec 7050B subwoofer.
The 8130A is very easy to set up and use, the only connections required are the mains supply
and the input signal. The female XLR input connector can be fed with either AES/EBU formatted
digital signal or analog line level audio signal. The Genelec 8130A automatically detects analog or
digital signals and directs them to the correct signal paths.
Technical Specifications
Input word length 16 - 24 bits
Input format AES/EBU
Digital input XLR female
Connector type
Input Sampling rate
No de-emphasis 29 - 200 kHz
Input Sampling rate
Using de-emphasis
Peak per pair with music material 108 dB SPL @ 1m
Drivers
Bass 5" magnetically shielded
Midrange -
Treble 3/4" metal dome, magnetically shielded
Crossover frequencies 3 kHz
Free field frequency
response 58 Hz - 20 kHz (± 2 dB)
Amplifier power /ch
Bass 40 W
Midrange -
Treble 40 W
Speaker dimensions (H x W x D)
mm 285 x 189 x 178 mm (Height with Iso-Pod? 299 mm)
inches 11 1/4 x 7 7/16 x 7 1/16" (Height with Iso-Pod? 11 13/16“)
Amplifier dimensions* (H x W x D)
mm Integrated in the speaker cabinet
inches
Speaker weight 5.6 kg (12.3 lb)
The Twin6 Be is the best seller of the Focal Professional range and the most versatile work tool of the SM6 line. It represents the only necessary solution for recording, mixing and mastering. The image precision, treble definition as well as midrange neutrality are at the heart of its reputation.
The excellent articulation of the bass and midbass registers, even at very high sound levels, makes it an unavoidable reference for engineers who require absolute transparency. Furthermore, the design of the Twin6 Be permits a high SPL while at the same time offering a stable tonal balance. One of the two 6.5" woofers works in large band (midrange – bass) whereas the other reproduces from 40 to 150Hz. This creates a bass that preserves all the signal dynamics, without any masking effect in the midrange, thereby keeping all its neutrality and transparency. Additional control of the bass register is accomplished by fine-tuning on the control plate on the back of the Twin6 Be in order to obtain a perfect mirror configuration with its mate. The Twin6 Be can be installed vertically or horizontally to respond to the space requirements of each studio.
Specifications
Frequency response :
40Hz - 40kHz
Maximum SPL :
115dB SPL (peak @ 1m)
Input :
Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.