Content |
PRICE PER UNIT
Technical Specifications
-
Speaker: Woofer: 6' Glass Aramid Composite Woofer
-
Tweeter: 1'' Neodimium Soft Dome Tweeter με Ferro Fluid
-
Input: XLR (3-pin), RCA & 1/4' TRS - 10k Ohm, Balanced / Unbalanced
-
Amplifier 100 Watt Dynamic Power Bi-amp, 24 dB Octave Filters
-
Frequency Response: 49Hz - 20kHz
-
Magnetic Shield: Yes
-
Dimensions: (H x W x D) 32.1cm x 22.5cm x 29 cm
|
The Solo6 Be monitor will surprise you in the very first minutes you spend with it, partly due to its size/extended bass response (40Hz at -3dB). The 6.5" "W” composite sandwich mid-woofer combines neutrality in the midrange, fullness in the midbass register and bass control. Its compactness and the choice of a large front laminar port guarantee easy integration in studios that need a near field monitor without any acoustic compromise. The user settings on the back of the Solo6 Be, combined with its compactness, make it easy to carry and to adjust according to the acoustics of each studio.
Specifications Frequency response : | 40Hz - 40kHz | Maximum SPL : | 113dB SPL (peak @ 1m) |
Input :
|
Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV
| Bass/mid-range : | 150W rms, BASH® technology | Treble : | 100W rms, AB class |
Electric supply :
|
Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire
|
Visualization and control :
|
Input sensitivity selector
Adjustable tweeter and woofer levels with potentiometers
Power On/off switch
Voltage selector
| warning light : | Power on LED |
Electric supply :
|
Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire
| Woofer : | 6W4370B, 6-1/2" (16.5cm) Focal "W" composite sandwich cone speaker | Tweeter : | Focal TB871 Beryllium inverted dome tweeter | transducer shielding : | Integral through cancellation magnets or by magnet design | Box : | 7-1/2" (19mm) MDF panels |
Finish :
|
Dark red natural veneering side panels, black body
| Dimensions (HxWxD) : | 13 x 9-7/16 x 11-7/16 " (330x240x290mm) | Weight : | 24.2lb (11kg) |
|
PRICE PER UNIT The most powerful AX monitor With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields. The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill. Cabinet- and bass reflex-construction Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil. Amplification and controls With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series. On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies. There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application. Review: A8X: a "powerful link" between near- and midfield monitors! "The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010) Mid-Woofer | | Number | 1 | Basket Ø | 8.5" (220 mm) | Voice coil Ø | 1.5" (38 mm) | Cone material | Carbon/Rohacell/Glass Fiber | Tweeter | | Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers | | Mid-Woofer | 1 | Type | PWM | Amp. power RMS / music | 150 W / 225 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 75 W | Control panel | | Input Sensitivity | -∞ to +14 dB | High Shelf EQ > 5 kHz | ±6 dB | Low Shelf EQ | ±6 dB | Tweeter gain | ±4 dB | Input connectors | | Analog | XLR / RCA | General data | | Frequency response | 38 Hz - 50 kHz | THD 90dB/1m > 100 Hz | ≤0.5 % | Long term output | ≥112 dB | Max. peak | ≥120 dB | Crossover frequencies | 2300 Hz | Input impedance | 30 KOhm | Weight | 28.7 lb (13 kg) | Magnetically shielded | No | Height x Width x Depth | 15.5" (400 mm) x 10" (255 mm) x 12.5" (320 mm) | Warranty | 5 Years | Delivery contents | Power cord, Manual |
|
Features
Professional 2-way active DJ monitors
Output: 2x 30 W RMS
Frequency response: 35 Hz - 20 kHz
S/N Ratio: > 75 dB
Impedance: 8 ohm
Magnetically shielded bass drivers
Speakers: 13.34 cm (5.25“) bass, 2.54 cm (1“) tweeter
Technical Data
Dimensions: 232 x 320 x 180 mm
Weight: 5.0 kg (per piece)
|
PRICE PER UNIT
S3X-V
Using the newly developed 4” HexaCone midrange and 9” HexaCone woofer combined together with the X-ART tweeter creates the unique S3X-V control monitor.
A step up over the smaller models, the S3X-V is capable of producing more power and volume along with a more detailed and homogeneous sound that will impress even the most experienced sound engineer. Whether the complex sonic images of an orchestra or the smooth tone of a jazz trio, the S3X-V reveals even the finest nuances of any material. The driver assembly of the S3X-V allows long time, non-fatiguing listening sessions.
Reviews: "Wonderfully detailed...”
“Wonderfully detailed, with an exceptionally transparent mid-range. [...] ADAM make the leap to a three-way speaker design that seems to pay dividends in clarity and separation. [...] I think it would be fair to say theyʽre the best sounding ADAM monitors Iʽve reviewed.” (Sound On Sound, 12/2009)
“No doubt, the S3X-V deserve the title Reference Monitor. With this series, ADAM Audio proves to have a very good feeling for meeting the specific demands of the sound engineerʽs guild, creating studio standards at the same time. [...] A precision tool combined with a luxury good.” (www.96kHz.de, 03/2010)
Woofer |
| Number | 1 | Basket Ø | 9" (228 mm) | Voice coil Ø | 2" (50 mm) | Cone material | HexaCone | Midrange |
| Number | 1 | Basket Ø | 4.5" (116 mm) | Voice coil Ø | 1" (25 mm) | Cone material | HexaCone | Tweeter |
| Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers |
| Woofer | 1 | Type | PWM | Amp. power RMS / music | 250 W / 350 W | Midrange | 1 | Type | PWM | Amp. power RMS / music | 250 W / 350 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 100 W | Control panel |
| Input Sensitivity (coarse) | -20 to +8 dB (4 dB steps) | Input Sensitivity (fine) | -1.5 to +2 dB (0.5 dB steps) | EQ 80 Hz | 0 to +6 dB (1 dB steps) | High Shelf EQ > 6 kHz | ±4 dB (1 dB steps) | Low Shelf EQ | ±4 dB (1 dB steps) | Tweeter gain | ±2 dB (0.5 dB steps) | Input connectors |
| Analog | XLR | Digital (optional) | AES/EBU / SPDIF / word clock | General data |
| Panel | Front | Frequency response | 32 Hz - 50 kHz | THD > 80 Hz | ≤0.6 % | Long term output | ≥114 dB | Max. peak | ≥124 dB | Crossover frequencies | 350 / 2800 Hz | Input impedance | 10 KOhm | Weight | 34 lb (15,4 kg) | Magnetically shielded | Optional | Height x Width x Depth | 19" (485 mm) x 11" (281 mm) x 11.5" (295 mm) | Warranty | 5 Years | Delivery contents |
Power cord, Manual
|
|
PRICE PER UNIT The smallest big sound ever... With the A3X, ADAM Audio present their smallest monitor to date, making it perfectly suited for all environments where space is limited but sound shouldnʼt be constricted. The A3X combines a tiny footprint with the much acclaimed ADAM sound quality by using the X-ART tweeter for the higher frequencies, a guarantee for crystal clear music reproduction. A 4.5” (basket) driver handles the lower registers. The diaphragm is made from carbon fiber, a material that is very light but very stiff and therefore capable of delivering colouring-free sound. Two built-in 25 Watt amplifiers powers each of the drivers directly. Stereolink A very handy and exclusive technology found in the two smaller AX monitors is the Stereolink. This is accomplished by a pair of additional RCA connections that allow for a bypass of the second stereo channel to the other speaker. This new technology connects two A3X speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakerʼs gain control. This makes the A3X a natural for "mixer-less” desktop applications where overall system volume needs to be adjusted easily. Controls and Connectors The front of the A3X sports dual ports for surprisingly low frequency response down to 60Hz. The front panel also has power and gain controls. The rear panel includes a tweeter gain control as well as balanced (XLR) jacks and unbalanced (RCA) jacks, allowing for greater connection flexibility. There are also two M6 (6 mm) metric screw threads for stand/wall mounting. Review: "Highly recommended“ "Iʼve used various monitors for my computer work before, but never of the caliber of the A3X series. Before these, I would have to redo my mixes significantly when transitioning from the small cheapies to the big 'real ones'. The ADAM Audio A3Xʼs save me a step by providing both great sound in a compact format and by changing mundane audio task-work into a quality listening experience. If you use good monitors from the outset, youʼll learn your music that much faster so that when it comes time for mixdown and mastering on your big boxes, youʼll already be acclimated to your songʼs subtler sonic aspects—aspects revealed only by the A3Xʼs with their sweet, smooth top end, and impressive handling of bass frequencies. Highly recommended.“ (Jon Chappell, Harmony Central, 03/10) Review: "...one of the best compact monitors“ "ADAM´s A3X as the smallest monitor with a X-ART tweeter to date has convinced us in every respect. It´s one of the best compact monitors we have ever reviewed and with its almost shameless low price it´s worth every penny. (Professional Audio, 05/10) Mid-Woofer | | Number | 1 | Basket Ø | 4.5" (120 mm) | Voice coil Ø | 1" (25 mm) | Cone material | Carbon Fiber | Tweeter | | Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers | | Mid-Woofer | 1 | Type | A/B | Amp. power RMS / music | 25 W / 40 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 25 W / 40 W | Control panel | | Input Sensitivity | -∞ to +14 dB | Tweeter gain | ±4 dB | Input connectors | | Analog | XLR / RCA | General data | | Frequency response | 60 Hz - 50 kHz | THD 90dB/1m > 100 Hz | ≤0.8 % | Long term output | ≥98 dB | Max. peak | ≥106 dB | Crossover frequencies | 2800 Hz | Input impedance | 10 KOhm | Weight | 10.1 lb (4,6 kg) | Magnetically shielded | No | Height x Width x Depth | 10" (252 mm) x 6" (150 mm) x 7.5" (185 mm) | Warranty | 5 Years | Delivery contents | Cinch-cable, Power cord, Manual |
|
Reviews
There are no reviews yet.