| Content |
- High-power 200-Watt 2-way PA sound reinforcement speaker system for live and playback applications
- Ultra-compact and light weight system delivers excellent sound even at extreme sound pressure levels
- Revolutionary Class-D amplifier technology: enormous power, incredible sonic performance and super-light weight
- Internal switch-mode power supply for noise-free audio, superior transient response and very low power consumption
- Integrated sound processor for ultimate system control and speaker protection
- Extremely powerful 10'' long-excursion driver provides incredibly deep bass and acoustic power
- State-of-the-art 1.35'' aluminum-diaphragm compression driver for exceptional high-frequency reproduction
- Ultra-wide dispersion, large-format exponential/conical horn
- Ultra-low noise Mic/Line input with Volume control and Clip LED
- Additional Line output allows linking of additional speaker systems
- Versatile trapezoidal enclosure design allows different positioning
- - Stand mounting with 35-mm pole socket
- - Tilts on its side for use as a floor monitor
- Ergonomically shaped handle for easy carrying and setup
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
|
This remarkably versatile 10“/1" enclosure can serve as a satellite, a fullrange cabinet, and a low-profile wedge monitor. The Music/Speech knob adjusts its finely balanced and therefore feedback-resistant frequency response to suit the given application. All this and an onboard power amp make the PR:O 10 XA a very flexible sound reinforcement tool indeed.
Features
Application: Fullrange Cabinet / Stage monitor / Satellit
Output Power: 600 Watt
Speaker Output for Extension Cabinet
Mic and Line Input
Versatile High-class Tool
Title PREMIUM PR:O
Product Class Active Systems
Model PR:O 10 XA
Frequency response +/- 3 dB 89 Hz - 19 kHz
Frequency response -10 dB 67 Hz - 19 kHz
Maximum SPL, @ 10% THD 121 dB
Connections 1x XLR Combi Line In/Mic balanced,1x XLR Through balanced
LF Speaker 10"
HF Driver 1"
Horn characteristics 90° x 60° CD horn
Equalizer Tone control
Subsonic filter 35 Hz
Peak limiter yes
RMS-Soundlimiter yes
HF protection (passive) Dyn. protection circuit
Amplifier 600 W class D - 4 ohms
Parallel Speaker Out Min impedance 8 Ohm/300 Watt 1x Speakon
Pole mount DuoTilt 3/7
Rigging points 3x M8
Handles 1, integrated
Enclosure MDF
Grille metal grille with acoustic foam
Finish acrylic painture, black
Dimensions (WxHxD) 32 cm x 48 cm x 29 cm
Weight 13,9 kg / 30.6 lbs.
| LD Systems MIX 10 A G3
Active 2-Way Loudspeaker with Integrated 7-Channel Mixer
The ideal choice for small-scale PA and personal monitoring applications, the active LD MIX 10 A G3 integrates a 7-channel mixer and Class D amplification with 2 x 400 watts peak power. The compact bass reflex loudspeaker features a 10" custom woofer and 1" Celestion HF driver complement, 65 Hz to 20 kHz frequency response and 90° x 60° dispersion delivering crystal clear sound with punch and detail.
Accomodating a wide variety of input sources including electric instruments, smartphones, tablets, MP3 and CD players, the built-in mixer provides 3 microphone channels with 2-band EQ, 48 V phantom power plus switchable hi-Z input (CH1) and stereo line channel. The output section includes a 3-band master EQ for overall tone shaping, 4-segment LED metering and XLR monitor and subwoofer outputs. In addition, the LD MIX 10 A G3 sports a DSP with 16 effect presets, limiter and overcurrent, overload, short circuit and thermal protection. A speakON output allows powering the passive LD MIX 10 G3 to easily create a stereo setup.
The rigid enclosure is constructed with tough plywood featuring a 50° monitor angle and Dual-Tilt pole receptacle for 0° or 5° mounting angles. On its own or in tandem with the passive unit, the LD MIX 10 A G3 provides amazing performance and versatility in a lightweight, easily portable package.
| Product type |
PA loudspeaker |
| Type |
active |
| Woofer dimensions |
10 " |
| Woofer size |
254 mm |
| Woofer brand |
Custom-made |
| Tweeter dimensions |
1 " |
| Tweeter dimensions (mm) |
25.4 mm |
| Tweeter brand |
Celestion |
| Dispersion (H x V) |
80 x 70 ° |
| Frequency response |
65 - 20.000 Hz |
| Amplifier |
Class D |
| Amplifier output (RMS) |
2 x 200 W |
| Amplifier output (peak) |
2 x 400 W |
| Max. SPL |
124 dB |
| Protection circuits |
limiter, over-current, overload, short circuit, thermal overload |
Mixer
| Channels |
7 |
| Mic inputs |
3 |
| Mic inputs |
6.3 mm jack, XLR |
| Controls for Mic Inputs |
+ 20 db switchable, DFX Send, EQ Hi, EQ Low, Hi-Z Switch (channel 1 only), level |
| Line inputs |
2 |
| Line input connectors |
2 x XLR, 3.5mm TRS |
| Controls Line Inputs |
level |
| Hi-Z inputs |
1 |
| Hi-Z input connectors |
6.3 mm jack |
| Input Impedance Hi-Z Input Connectors |
1000 kOhm |
| Monitor Line Outputs |
2 |
| Connector Type Monitor Line Output |
XLR |
| Controls for Monitor Line Output |
Monitor Volume, Sub level |
| Max Output Level Line Output Monitor |
17 dBu |
| Record Outputs |
1 |
| Increased power main output (at 4 ohm) |
200 W |
DSP Digital Effects Unit
| DSP Number of Programs |
16 |
| DSP Controls |
DFX Return, footswitch, Mute switch, presets |
| DSP Display Elements |
Peak LED |
Main Section
| Main section controls |
Balance, EQ Hi, EQ Low, EQ Mid, Master Volume, mono/stereo, Phantom Power, Power On/Off, switch operating voltage |
| Main section indicators |
4-segment Level Meter, power LED |
| Phantom power |
48 V |
| Mains connector |
IEC socket |
| Operating voltage |
SMPS |
| Operating voltage |
110 - 120 V ~ 50/60 Hz or 220 - 240 V ~ 50/60 Hz, automatic switching |
| Power consumption |
500 W |
Cabinet
| Cabinet construction |
Bass Reflex |
| Cabinet material |
16 mm Plywood |
| Cabinet surface |
texture paint |
| Cabinet colour |
Black |
| Width |
315 mm |
| Height |
489 mm |
| Depth |
307 mm |
| Weight |
12,3 kg |
| Other features |
Bluetooth, dual-tilt flange (0°/5°), Ergonomic handle |
|
- 2 way full range powered loudspeaker for portable PA and installation applications
- 600 Watt power featuring KLARK TEKNIK Class-D technology
- KLARK TEKNIK Digital Signal Processing for total system control
- High excursion 10" low frequency driver with low mass voice coil for improved transient response
- 1" high temperature dome compression driver with extended high frequency reproduction
- Converging elliptical waveguide provides wide dispersion and excellent pattern control
- Speech/music switch featuring optimised equalisation for voice or music applications
- Switchable 100 Hz high pass filter for subwoofer integration
- Lightweight composite enclosure with black finish
- Rugged powder coated perforated steel mesh grille
- Dual angle pole mount for accurate audience coverage
- Multiple internal rigging points for installation applications
- 3-Year Warranty Program*
- Designed and engineered in England
| Dimensions (H x W x D) | 522 x 329 x 294 mm (20.6 x 12.9 x 11.6“) |
|---|
| Net Weight | 13.3 kg (29.3 lbs) | | Components | 1 x 10" (254 mm) LF driver, 1 x 1" (25 mm) HF compression driver | | Frequency Response | 55 Hz - 18 kHz ±3 dB | | Dispersion | 90 °H x 60 °V @ -6 dB points | | Calculated Max SPL | 126 dB peak | | Construction | Injection-moulded polypropylene enclosure. Recessed carrying handle. Integral dual-angle pole mount socket | | Grille | Powder coated galvanised perforated steel mesh with foam backing | | Connectors | Mic/Line input: combo jack/female XLR wired pin 2 hot
Mix out: male XLR wired pin 2 hot
IEC mains connector with integrated fuseholder | | Rigging | (6) M10 threaded internal rigging points |
|
The Avante Audio A10 Achromic Series is a 10“, two-way active loudspeaker with a 1000W peak dynamic amplifier and an integrated DSP for a variety of applications including clubs, bars, mobile DJs, public address engagements, schools, houses of worship, fitness centers, and more. The Class-D amplifier delivers 250W (RMS) to the woofer, while the Class-AB amplifier drives 50W (RMS) to the high-frequency compression driver, which combine to provide a frequency range of 70 Hz to 20 kHz with a peak SPL of 121 dB.
The integrated DSP offers four modes: Normal, Club, Live, and Speech, allowing you to custom tailor the speaker to your specific application. Additionally, there is a two-band EQ to further enhance the sound. The H-PP molded enclosure features a steel grille and a dual position pole mount with 0 or 7.5° options. The rear panel offers a balanced combo XLR-1/4" input, two RCA inputs, and a balanced XLR output for connecting additional speakers. There are independent gain controls for the XLR and RCA inputs. The Avante A10 Achromic Series loudspeaker ships with a power cord.
- Amp Power: 1000W dynamic
- LF: Class-D 250W (RMS)
- HF: Class-AB 50W (RMS)
- Built-in digital signal processing (DSP) with LCD screen, EQ, and Presets
- Preset 1: Normal
- Preset 2: Live
- Preset 3: Club
- Preset 4: Speech
- Frequency Range: 70 Hz to 20 kHz
- Dispersion (H x V): 90 x 60°
- Output (Peak SPL at 1m): 121 dB
- Drivers: 10" woofer with 2" voice coil + 1" HF compression driver
- Inputs: Balanced combo XLR-1/4" and two RCA
- Output: Balanced XLR
- Enclosure: H-PP molded
- Grille: 1.2mm steel
- Handle: 1 x top
- Fly Points: 2 on top, 1 on back
- Pole Mounting: Dual position 0 or 7.5°
| Type |
10.0" / 254.0 mm, 2-way active loudspeaker |
| Frequency Range |
70 Hz to 20 kHz (-10 dB) |
| SPL Level |
Peak: 121 dB |
| Amplifier Power |
1000 W Dynamic, 250 W Class-D (LF) + 50 W Class-AB (HF) RMS |
| DSP |
DSP Features: LCD screen with EQ and multiple presets |
| Drivers |
10.0" / 254.0 mm woofer with 2.0" / 50.8 mm voice coil
1.0" / 25.4 mm HF compression driver |
| Input and Output Connectors |
Input: Balanced female combo XLR-1/4" / 6.35 mm jack
Input: 2 x RCA (phono)
Output: Balanced male XLR |
| Enclosure |
H-PP molded |
| Grille Material |
0.05" / 1.20 mm steel |
| Handles |
1 x top |
| Flypoints |
2 top, 1 back |
| Pole Mount |
Dual Position: 0 and 7.5° |
| Power Input |
115 VAC, 60 Hz |
| Power Consumption |
400 W |
| Dimensions (H x W x D) |
20.9 x 12.2 x 11.8" / 530.9 x 309.9 x 299.7 mm |
| Weight |
25.0 lb / 11.3 kg |
|
- EV QuickSmart Mobile application: quickly and wirelessly configure, control and monitor up to six ELX200 loudspeakers simultaneously, and receive immediate notification during critical performance conditions. Bluetooth® is available in select countries.
- QuickSmartDSP features best-in-class processing. Easy setup via four presets, sub/top system-match, three-band EQ, five user-programmable presets, visual monitoring of limiter status, input level control and meters, and master volume control to optimize gain structure, all via LCD.
- High-efficiency 1200 W Class-D power amplifier delivers up to 130 dB peak SPL utilizing transducers designed and engineered by EV.
- EV-patented Signal Synchronized Transducers (SST) waveguide design provides precise and consistent coverage, minimal distortion, and maximized acoustical loading.
- Professional-grade hardware: three M10 threaded mounting points for forged eyebolts, integrated pole-mounts and the proven ZLX two-handle design for easy lifting.
ELX200-10P features high-efficiency Class-D power amplifiers (up to 1200 W) with integrated QuickSmartDSP, and delivers up to 130 dB SPL utilizing transducers designed and engineered by EV (10-inch EVS-10M woofer coupled with a DH-1C 1-inch titanium compression driver). Powered full-range models allow easy setup via four presets (Music, Live, Speech, Club), sub/top system-match crossovers, three-band EQ, five user-programmable presets (Store and Recall settings), visual monitoring of limiter status, input level control and meters, and master volume control to ensure optimal gain structure.
ELX200 powered models are ideal for portable and installed applications, with lightweight and durable polypropylene enclosures, three M10 threaded mounting points and the proven ZLX handle design for easy lifting.
The new QuickSmart Mobile wireless control and monitoring application, using Bluetooth® Low Energy (BTLE) technology, allows intuitive system control, configuration and monitoring of up to six powered ELX200 loudspeakers simultaneously. Receive alerts when your system is being overdriven, and control your system while in front of your speakers, not behind. Bluetooth® is available in select countries.
| Available Color | Black | | Connector Type | (1) Stereo RCA Input, (2) XLR/TRS combo jack, and (1) XLR | | Coverage (Nominal -6 dB) H | 90° | | Specifications |
| Coverage (Nominal -6 dB) V | 60° | | Crossover Frequency | 1800Hz | | Depth | 319mm (12.6“) | | Enclosure Material | Polypropylene Composite | | Family | ELX200 | | Frequency Range (-10 dB) | 53 Hz – 20 kHz | | Frequency Response (-3 dB) | 59 Hz – 18 kHz | | Grille | 18 AWG steel with powdercoat | | Height | 531mm (20.9“) | | HF Transducer | DH-1C 1-inch titanium compression driver | | LF Transducer | EVS-10M 254 mm (10 in) | | Max. SPL/1m (calc) | 130dB | | Power Consumption | 100 - 240 V~, 50 - 60 Hz, 1.8A | | Power Rating | 1200W | | Powered or Passive | Powered | | Shipping Weight | 15.6kg (34.4 lbs) | | Speaker Type | Full-Range | | Suspension | (3) M10 suspension points | | Weight Net | 13.5kg (29.8 lbs) | | Width | 330mm (13“) | | Woofer Size | 10inch |
|
Reviews
There are no reviews yet.