| Content |
Professional, 7-channel, ultra-low noise DJ mixer with state-of-the-art phono preamps
45-mm infinium "contact-free” optical crossfader with adjustable friction for years of use
5 dual stereo inputs plus 2 mono mic/line channels with ULN mic preamps, Phantom Power, Gain control and Clip LED
Built-in USB interface for recording and playback of any digital music file. Works with your PC or Mac computer—no setup or drivers required
Massive software bundle including Audacity vinyl restoration and recording, Podifier and Golden Ear podcasting software downloadable at www.behringer.com
Ultra-musical 3-band kill EQ (-32 dB) with EQ on/off switch on all stereo channels
Long-wearing 100-mm faders and sealed rotary controls on all input channels
Headphone output with Level and Balance (PFL/Main) controls, switchable split mode and level display
Auto-talkover function with separate Sensitivity, Time and Damping controls
Main Dim, main Boost, Punch and Cut functions for awesome mix options
Subbass Out for separate subwoofer, additional Zone output for second room/area
"Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
Rack mount brackets included for ultimate flexibility
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
| |
- 5 input channels with gain control, 3-band equalizer, cue button and super-smooth channel fader
- 1 DJ microphone channel with talkover selector and 2-band equalizer
- Pre-fader listening to all stereo input channels and the master output via adjustable stereo headphones output
- Replaceable crossfader for crossfading between input channels with assignment switches
- 10-digit stereo LED level meter, master level control, and balance level control
- Adjustable zone output, and record output, independent of the master
- Inputs: 6x line (stereo RCA), 2x phono/line (stereo RCA), switchable; 2x microphone (6.3 mm jack), 1x microphone (XLR/6.3 mm jack) and headphones (6.3 mm jack)
- Outputs: master (3-pin XLR, stereo RCA), zone and record (both stereo RCA)
- Operation via supplied power unit
- Rack installation, 4 U
| Power supply: |
230 V AC, 50 Hz ~, |
|
via supplied power unit |
| Power consumption: |
30 W |
| Inputs: |
| DJ MIC (front): |
combined XLR (3-pin)/ 6.3 mm jack (1/4“) (bal.) |
| MIC 1,2 (rear): |
6.3 mm jack (1/4“) (bal.) |
| Impedance: |
1 kohms |
| Minimum input voltage: |
1.5 mV RMS |
| LINE 1-5: |
stereo RCA |
| Impedance: |
27 kohms |
| Minimum input voltage: |
150 mV RMS |
| PHONO 1,2: |
stereo RCA |
| Impedance: |
47 kohms |
| Minimum input voltage: |
3 mV RMS |
| Outputs: |
| MASTER: |
stereo RCA, stereo XLR (3-pin) |
| ZONE: |
stereo RCA |
| Impedance: |
400 ohms |
| Output voltage: |
1 V RMS/ 0 dB |
| REC: |
stereo RCA |
| Impedance: |
5 kohms |
| Output voltage: |
225 mV RMS |
| Headphones: |
6.3 mm stereo jack (min. 16 ohms) |
| Tone control (DJ MIC): |
| 1x High: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| 1x Low: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| Tone control (channels 1-5): |
| 5x High: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| 5x Mid: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| 5x Low: |
-12 dB to +12 dB/ 1 kHz, ±1 dB |
| S/N ratio: |
>80 dB |
| Frequency range: |
20-20,000 Hz |
| Distortion: |
0.02% |
| Dimensions (WxHxD): |
483 x 179 x 94 mm (19“, 4 U) |
| Weight: |
4 kg |
|
The Xone:DB range exploits the potential of digital mixer technology to bring you maximum DJ creativity. Flexible and versatile mixer controls with an intuitive layout give the DJ full control over the mix.
The DB2 boasts twin chainable FX engines, four stereo channels, full Input matrix, and unique Trimodal EQ system. With its built in USB soundcard, MIDI control, Xone Filters and X:LINK connectivity, the Xone:DB2 unleashes the DJ's creativity. The Xone:DB2 captures the essence of DB4 in a stylish, accessible, affordable format and blurs the boundaries between DJing, production and performance for the next generation.
Massive FX Library
Boasting a massive FX library of more than 50 FX presets divided into 5 FX types: Delays/loopers, Reverbs, Resonators, Modulators and Damage, Xone:DB2 allows you to dig deep and get hands-on with your music. From subtle FX washes to total transformation of your sound - you're in control.
FX Cascade
The two FX engines can be cascaded, or chained, to run the output of FX-X to the input of the FX-Y, allowing the audio to be processed by any combination of two different effects. Additionally any channel routed to FX-X can be processed by both engines, but the single effect on the FX-Y engine can still be accessed by routing the channel to Y.
Editable FX Parameters
Each FX engine has a dedicated expression control and a rotary pot to set the wet/dry level, whilst further tweaking can be performed using the global controllers under the screen.
Input Matrix
Each of DB2's four input channels has a full input matrix that can select from four analogue (Line or RIAA), four USB, or two digital sources, allowing for a wide variety of audio sources to be connected simultaneously. The same source can also be selected on multiple channels.
Trimodal EQ
Xone:DB2 adopts the fresh approach to creative equalisation introduced on DB4. The EQs can be used in three different modes - standard asymmetric EQ (+6/-26dB), total Kill (+6dB/OFF with a 24dB/octave slope), or High-Pass/Low-Pass filter with adjustable resonance.
Mic/Line Input
With 2 band EQ, gain, cue and mix level and with full access to FX.
High Visibility OLED Display
The OLED display is clearly visible, even in bright sunlight, and displays channel FX selection and current BPM, as well as being an easy interface for the Menu setup functions.
Lightweight chassis
DB2's lightweight aluminium chassis is designed to make touring with the console easy.
Integral soundcard
The built-in, multi-channel USB2 soundcard allows replay and recording from computer-based audio software for 4 stereo sends and 4 stereo returns.
MIDI control
All controls (except Mic and Phones level) send MIDI data. The mixer can double up as a MIDI controller for DJ software via the MIDI shift button, which allows the FX selection controls to send MIDI data without changing the mixer settings. DB2 can generate internal MIDI clock which can be used to control the tempo of a connected DAW via USB and the ability to change the mixers MIDI channel.
X:LINK
X:LINK uses a standard RJ45 connector and distributes power and data, allowing connection to X:LINK compatible devices, saving USB ports on your computer.
Spatial Xover Useful output processing tool for dealing with poor room acoustics, less than ideal speaker placement, as a diagnostic tool for phase imbalance, or as an effect to change the bass sound focus.
Pro-X-Fader Option
Retro-fit Pro-X-Fade option kit for Xone:DB2. Pro-X-Fade uses 100% conductive plastic tracks and a wider stem for extended fader life. Pro-X-Fade also allows the DJ to adjust both the feel of the fader and the cut-in point to suit their personal style. Speak to your approved Allen & Heath dealer or distributor for purchasing and fitting information.
|
- 6 input channels
- MIC (XLR3) inputs on channels 1 and 2
- MIC (JACK ¼”) / stereo LINE (RCA) in channels 3 and 4. Input signal pushbutton selector (MIC/LINE) on back panel
- Stereo LINE (RCA) on channels 5 and 6
- Input signal gain level control (accessible only with screwdriver)
- Each channel features signal present (SP) and CLIP indicators
- General phantom power switch located on back panel. Independent internal phantom power assignment to any MIC input
- Triple tone control (accessible only with screwdriver)
- 2 main stereo OUTPUTS (XLR3) with independent volume control
- 3 LED OUTPUT level meter
- Input channels can be routed to any main output (A,B) or both
- 2 additional stereo REC outputs (REC1, REC2)
- Mono mode selector in outputs A and B
- Headphones monitoring of selected output (A or B)
- Integrated, internally configurable talkover. Affects OUT A and REC A
- Remote MUTE function (PHOENIX) allows linking to external fire detection centrals
- TALKOVER function fully configurable to –20dB or –30dB that affects boths outputs A and REC A
The SAM mixer series has been specially designed for all public address and communication systems requiring a minimum risk of unwanted external manipulation.
Frequently used controls are easily accessible. Specific adjustments remain only accessible by the installer for precise and permanent settings.
SAM SERIES are very easy to use, even for non-technical users. All this is packed into a compact, 1 unit high, 19'' rack unit.
SAM series general KEY features
- Universal 1 RU, 19” installation mixers
- Excellent frequency response
- Balanced MIC and stereo LINE inputs and main outputs
- Reliable proprietary power supply
- Ideal for any application requiring a trouble free mixer
|
- Type Analog
- Channels 4 + 1
- EQ 3-band / Total Kill (CH 1-4 + CH A)
- USB Soundcard 20 Channel (10 in / 10 out)
USB2 / Class Compliant
24bit / 96kHz
1 x MIDI IN
1 x MIDI Out - Line Inputs 4 x RCA (CH 1-4)
1 x 1/4″ TRS (CH A) Mono/Stereo - Phono Inputs 4 x RCA (CH 1-4)
LN/PH Switch for DVS - USB Inputs 5 x USB (CH 1-4 + CH A)
- Mic Input 1 x XLR
- Master Output 1 x XLR (Balanced)
- Master 2 Output 1 x RCA (Un-balanced)
- Booth Output 1 x 1/4″ TRS
- Record Output 1 x RCA (Un-balanced)
- Master Insert 1 x 1/4″ TRS
- MIDI Sync/Out 1 x 5-Pin DIN
DIN Offset Control - Send/Return I/O
1 x 1/4″ TRS Send
1 x 1/4″ TRS Return
1 x LN/Hi-Z Switch
- Internal Xone:FX Yes
- Hybrid FX Mode Yes (Internal External)
- FX Send 1 x Pre/Post Selectable (CH 1-4 + CH A)
- Filter
1 x VCF Filter
HPF / BPF / LPF
Adjustable Frequency & Resonance
Assignable CH 1-4 + CH A + External Return - X-Link 1 x RJ45
- Headphones
1 x 1/4″
1 x 3.5mm
Split Cue Monitoring - Channel Faders 60mm VCA / Replaceable
- Chanel Meters 12 Segment LED
- Channel Fader Curve 3 Types
- X-Fader 45mm VCA / Replaceable / Innofader Compatible
- X-Fader Curve Settings 3 Types
- MIDI Clock Send + Receive
Start / Stop / Pause / Tempo Bend (-/+) - MIDI Assignable Yes (MIDI CC / MIDI Notes)
- BPM Detection Auto / Manual / Tap Tempo
- Earth Ground Terminals x 2
- Headroom 20dB
- AC Mains
100 to 240V
AC 50/60Hz
Consumption 35W max - Mains Adaptor 3 pin IEC socket with cable clamp
- Fuse Rating 250V AC T1AL 20mm
- Height 4.3″
- Width 12.6″
- Depth 14.8″
- Weight 11.5 lbs.
|
Reviews
There are no reviews yet.