| Content | STUDIO CONDENSER MICROPHONE C-1U
Studio Condenser Microphone with USB Audio Interface and software suite
Professional, large-diaphragm condenser microphone with built-in USB interface, ideal for podcasters and musicians
Plug this amazing USB-mic straight into your computer and turn your PC or Mac computer into a recording system without the need for any other hardware
Directly works with your PC or Mac computer—ultra-low latency ASIO and WDM drivers for PC audio optimization included
Exceptionally flat frequency response and ultra-high sound resolution perfect for voice, acoustic instruments, etc.
Cardioid pickup pattern for outstanding sound source separation and feedback rejection
Pressure-gradient transducer with shock-mounted capsule
- Professional large-diaphragm condenser microphone with built-in 48 kHz USB interface for unsurpassed audio quality
- Gets phantom power directly from PC USB output
- Comes with Audacity audio editor, Kristal audio engine, Podifier uploading software, and Juice and Podnova downloading software
- Maximum SPL (sound pressure level) of 136 dB
- Ideal as main and support microphone for studio and live applications
- Exceptionally flat frequency response and ultra-high sound resolution
- Cardioid pickup pattern for outstanding sound source separation and feedback rejection
- Ultra low-noise transformerless FET input circuitry
- LED indicates phantom power operation
- Ultra-rugged construction with die-cast body
- USB connector and swivel stand mount included
| The NT-USB Mini is a compact, studio-quality USB microphone designed for recording direct to a computer or tablet.
It is simple to set-up and use, and a smooth frequency response and directional pickup pattern make the NT-USB Mini perfect for recording vocals and instruments, livestreaming and gaming, podcasting, voice calls and more.
The included desk stand features a magnetic base that can be detached for easy mounting on mic stands or studio arms, and with its in-built pop filter and zero-latency headphone monitoring, the NT-USB Mini delivers crisp, clear audio in all recording applications.
Acoustic Principle: Pressure gradient Active Electronics: Electret condenser, A/D and USB interface Polar Pattern: Cardioid
Frequency Range: 20 Hz – 20 kHz
Input SPL @ 1%THD: 121dB (A-weighted, as per IEC651) Sample Rate: 48 kHz
Bus Powered: Yes
Bit Depth: 24-bit Analog Output: 3.5mm headphone
Computer Connectivity: USB - simultaneous I/O Mono input, stereo output
Output Connection: USB-C OS Requirements: macOS 10.12 / Windows 10
Weight (grams): 585
Dimensions (millimetres): Height: 141.9 Width: 54.5 Diameter (base): 89.3
• Studio-quality microphone with U SB-C connectivity
• 3.5mm headphone output with zero-latency monitoring
• Easy set-up, plug in and play
• Detachable magnetic desk stand
• In-built pop ? lte
| Polar Chart: |
Cardioid |
| USB compatibility: |
Yes |
|
In the tradition of the SM58?, the Beta 58A dynamic microphone has become a top choice among vocalists and touring sound professionals.
The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille. Typical applications for the Beta 58A include lead vocals, backup vocals and speech.
- Smooth, extended frequency response for outstanding sound for professional live vocal use
- Consistent supercardioid pattern provides the best gain-before-feedback among dynamic microphones
- Pneumatic shock mount reduces handling noise
- Frequency response: 50 to 16,000 Hz
-
Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
-
Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound
-
Neodymium magnet for high signal–to–noise output
-
Hardened steel mesh grille that resists wear and abuse
-
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
-
Minimally effected by varying load impedance
-
Legendary Shure quality and reliability
| Transducer |
(Moving Coil, with Neodymium Magnet) Dynamic |
| Polar Pattern |
Supercardioid |
| Frequency Response |
50 Hz - 16 kHz |
| Maximum Input Sound Level |
not specified by manufacturer |
| Power Requirements |
None Dynamic, Requires No Phantom or Battery Power |
| Output Impedance |
150 Ohms (290 Ohms Actual) |
| Output Connectors |
XLR-3 Type |
| Dimensions |
6.375 x 2" (162 x 51mm) LxDiameter |
| Weight |
9.92 oz. (278 g) |
| The Pod Pack 1 is a professional upgrade to any announce studio. The kit consists of a high-quality USB condenser microphone paired with a fully-adjustable suspension boom arm, keeping the desk clear and the microphone always in position for podcasting, on-air or voice-over applications. Assembly is a snap and the articulating boom clamps securely to nearly any desk or table surface.
- Included USB cardioid condenser microphone
- All-steel construction
- Dual suspension springs for stable angle
- Fully adjustable - microphone can even be suspended upside-down
- Clamps to nearly any desk or table
- USB cable included
- Microphone
- Element: Back electret condenser
- Element Diameter: 13mm
- Polar pattern: Cardioid
- Frequency response: 20 - 17,000 Hz
- Sensitivity: -34dB +/-2dB (0dB = 1V/Pa @ 1kHz)
- Output impedance: 100Ω +/-30% (at 1kHz)
- Load impedance: >1kΩ
- Self noise: 16dBA
- Max SPL: 132dB (@ 1kHz
- Signal to Noise ratio: 78dB
Broadcast Boom Arm
- Adjustable height and angle
- Telescoping range: 15.75" - 27.5" (40cm - 70cm)
- Weight: 13.5oz (382g)
| High-Performance 2.4 GHz Digital Wireless System with 2 Handheld Microphones and Dual-Mode USB Receiver
-
- Package of 2 ULM200M handheld microphones and ULM200D dual-mode USB receiver
- High-quality microphone capsule for dedicated vocal applications
- Ultra-compact USB receiver with dual mode analog/digital audio interface
- Digital 2.4 GHz wireless connectivity offers superior sound quality
- Maximum range 120 m
- Automatic pairing for easy and intuitive setup
- Integrated volume up and down buttons on handheld microphone
- Panic mute feature on microphone
- Receiver powered via USB interface
- Auto-sensing of analog or USB digital audio connection
- 2.4 GHz ISM band operation allows license-free use on a worldwide basis
- 3-Year Warranty Program*
- Conceived and designed by BEHRINGER Germany
| Optimised for podcasters, gamers, streamers and home recording applications
Three integrated 14 mm capsules
Switchable polar pattern: omnidirectional, figure-eight, cardioid, stereo
Frequency range: 20 - 20,000 Hz
Max. SPL: 120 dB
AD-converter: 48/44.1 kHz / 16-bit
Gain +17 dB
Mute button
Volume control
Headphone jack: 3.5 mm mini jack
Mini-B USB connector
Plug & Play compatible with Windows 10 (64-bit) and Mac OSX 10.10 or higher
5/8" Thread for mounting on standard microphone stands
Dimensions (H x W x D): 227 x 110 x 110 mm
Weight: 1.7 kg
Includes table stand and USB cable |
Reviews
There are no reviews yet.