| Content |
26 AWG stranded (19x38) bare copper conductor, polyethylene insulation, individually shielded
with BC ?French Braid?, each quad w/26 AWG TC drain wire, color-coded PVC inner jacket w/overall
PVC jacket and 20 AWG TC drain wire.
PHYSICAL CHARACTERISTICS :
CONDUCTOR :
Number of Quads: 2
Total Number of Conductors: 8
AWG: 26
Stranding: 19x38
Conductor Diameter: .020 in.
Conductor Material: BC - Bare Copper
INSULATION :
Insulation Material: PE - Polyethylene
Insulation Diameter: .045 in.
INNER SHIELD :
QUAD :
Quad Shield Material Type: French Braid
Quad Shield Material: BC - Bare Copper
Quad Shield %Coverage: 95 %
INNER SHIELD DRAIN WIRE - QUAD :
Quad Shield Drain Wire AWG: 26
Quad Shield Drain Wire Stranding: 7x38
Quad Shield Drain Wire Conductor Material: TC - Tinned Copper
INNER JACKET :
Inner Jacket Material: PVC - Polyvinyl Chloride
Inner Jacket Diameter: .157 in.
Inner Jacket Insulation Resistance: Brown, Red
Inner Jacket Color Code Chart:
Number Color
1 Brown
2 Red
QUAD : Quad Inner Jacket Color Code Chart:
Number Color
1 Blue
2 White
3 Blue w/White Stripe
Number Color
4 White w/Blue Stripe
OVERALL CABLING :
Overall Cabling Color Code Chart:
Number Color
1 Brown
2 Red
OUTER SHIELD :
Outer Shield Drain Wire AWG: 20
Outer Shield Drain Wire Stranding: 19x32
Outer Shield Drain Wire Conductor Material: TC - Tinned Copper
OUTER JACKET :
Outer Jacket Material: PVC - Polyvinyl Chloride
OVERALL NOMINAL DIAMETER :
Overall Nominal Diameter: .458 in.
MECHANICAL CHARACTERISTICS :
Operating Temperature Range: -40°C To +60°C
Bulk Cable Weight: 85 lbs/1000 ft.
Max. Recommended Pulling Tension: 89 lbs.
Min. Bend Radius (Install): 4.75 in.
APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE :
APPLICABLE STANDARDS :
EU CE Mark (Y/N): No
EU RoHS Compliant (Y/N): Yes
EU RoHS Compliance Date (mm/dd/yyyy):: 01/01/2004
PLENUM/NON-PLENUM :
Plenum (Y/N): N
ELECTRICAL CHARACTERISTICS :
Nom. Characteristic Impedance: 40 Ω
Nom. Inductance: .21 ?H/ft
Nom. Cap. Cond. to Other Cond. & Shield @ 1 KHz: 39.2 pF/ft
Nom. Cap. Between Cond. in a Quad Config. @ 1 KHz: 57.4 pF/ft
Nominal Velocity of Propagation: 66 %
Nom. Conductor DC Resistance @ 20 Deg. C: 36 Ω/1000 ft
Nom. Inner Shield DC Resistance @ 20 Deg. C: 6.8 Ω/1000 ft
Max. Operating Voltage - UL: 100 V RMS
Max. Recommended Current: 1 Amp per conductor @ 25°C
Other Electrical Characteristic 1: 2/c 22 AWG equivalent DCR when connected to a 3-pin XLR
NOTE:Price per meter | Adam Hall Cables 4 STAR HPA 315 Hybrid Cable power & audio 3 x 1.5 mm² & 2 x 0,22 mm². Price per meter
General
Type
Power / Signal Cable
Temperature range
-20 - 70 °C
Power
Number of internal conductors
3
Center conductor cross section
1.5 mm²
Center conductor construction
48 x 0.20 mm
Center conductor material
OFC
Conductor resistance
85 ohm/km
Audio
Number of inner conductors 2
2
Center conductor cross section 2
0.22 mm²
Center conductor construction 2
28 x 0.10 mm
Center conductor material 2
OFC
Shield
AL/PT-foil, Copper spiral coil shield
Conductor resistance 2
55 ohm/km
|
DAP-Audio PSC-211
Power/Signal Cable, price per m
Specifications
500M on spool price p/m
Conductor drains Ø mm: OFC 20 x 0,10 (NF) & 3 x 1,5 (power)
Conductor insulation: PE red+black & PVC black (power)
Conductor insulation Ø: 1,3 mm (NF)
Filler material: paper
1st shield: twisted copper NF 96 x 0,10
2nd shield: -
Outer isolation: PVC 11mm, matte blue
Conductor resistance: 80 Ohm/Km
Shield resistance: 30 Ohm/Km
Capacity Inner conductor: 60 pF/m
Cap. Inner conduct. Shield/Inner conduct.: 78 pF/m
Working temperature: -20~60 °C (min./max.)
Working Voltage overflash: 30V
Nom Impedance: 110 Ohm | Multicore cable 8 pair studio with numbercode, black
All pairs are wear-resistant number coded as well as colour coding
in multiples of eight. Each pair has a pre-twisted drain wire and
additional AL/PT foil shielding for protection against corrosion and
oxidisation. Conductors and drain wire are tin plated. | 24 Pair Studio Multicore price per meter
The DAP mulitpairs are extremely flexible and rugged, suitable for very demanding environments: studio, stage and, most importantly, “on the road". The inner conductors are double colour coded and shielded with alufoil. Each pair is XLPE Isolated and numbered.
• Single shielded multicable
• colour coded
• Tough, roadproof quality
• Each pair OFC-copper shielded
1. Master jacket: flexible roadproof PVC
2. Separator: Twisted cotton paper
3. Pair jacket: Numbered dark-blue PVC Ø 3 mm
4. Pairshield: Silvercoated Alufoil
5. Conductor insulation: Polyethelene red and white Ø 1 mm
6. Inner conductor: Oxygen free copper 99.997 % OFC
7. Earth drain wire: Tinned copper
Each pair with alu-foil (OFC Copper), except MK-3222.
Min. order quantity: 1 m.
| Cable Length: |
1 m |
| Maximum Wire Size: |
3 mm² |
| Outer Cable Diameter: |
22 mm |
| Outer Isolation Type: |
PVC |
| 1st Shield: |
Aluminium foil |
| 2nd Shield: |
Tinned Copper |
| Filler Material: |
Cotton / Paper |
| Number of Pairs: |
24 |
|
24 AWG stranded (7x32) TC conductor, polyolefin insulation, individually shielded Beldfoil?
(100% coverage) numbered/color-coded PVC jackets, jackets and shields bonded to strip
simultaneously, overall Beldfoil shield and 24 AWG TC drain wire.
PHYSICAL CHARACTERISTICS :
CONDUCTOR :
Number of Pairs: 12
Total Number of Conductors: 24
AWG: 24
Stranding: 7x32
Conductor Diameter: .024 in.
Conductor Material: TC - Tinned Copper
INSULATION :
Insulation Material: PO - Polyolefin
Nom. Insulation Wall Thickness: .008 in.
Insulation Diameter: .040 in.
Lay Length: 1.75 in.
Twists/ft.: 6.85
Pair Color Code Chart: Red & Black
INNER SHIELD :
Inner Shield Material Trade Name: Beldfoil?
Inner Shield Type: Tape
Inner Shield Material: Aluminum Foil-Polyester Tape
Inner Shield % Coverage: 100 %
Inner Shield Drain Wire AWG: 24
Inner Shield Drain Wire Stranding: 7x32
Inner Shield Drain Wire Conductor Material: TC - Tinned Copper
INNER JACKET :
Inner Jacket Material: PVC - Polyvinyl Chloride
Inner Jacket Nominal Wall Thickness: .014 in.
Inner Jacket Diameter: .111 in.
Inner Jacket Color Code Chart:
Number Color
1 Brown
2 Red
3 Orange
4 Yellow
5 Green
6 Blue
7 Purple
Number Color
8 Gray
9 White
10 Black
11 Tan
12 Pink
OUTER SHIELD :
Outer Shield Material Trade Name: Beldfoil?
Outer Shield Type: Tape
Outer Shield Material: Aluminum Foil-Polyester Tape
Outer Shield %Coverage: 100 %
OUTER SHIELD DRAIN WIRE :
Outer Shield Drain Wire AWG: 18
Outer Shield Drain Wire Stranding: 7x26
Outer Shield Drain Wire Conductor Material: TC - Tinned Copper
OUTER JACKET :
Outer Jacket Material: PVC - Polyvinyl Chloride
Outer Jacket Nominal Wall Thickness: .045 in.
Outer Jacket Ripcord: Yes
OVERALL NOMINAL DIAMETER :
Overall Nominal Diameter: .561 in.
MECHANICAL CHARACTERISTICS :
Operating Temperature Range: -35°C To +75°C
Bulk Cable Weight: 128.4 lbs/1000 ft.
Max. Recommended Pulling Tension: 220.4 lbs.
Min. Bend Radius (Install): 5.5 in.
APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE :
APPLICABLE STANDARDS :
NEC/(UL) Specification: CM
CEC/C(UL) Specification: CM
EU CE Mark (Y/N): Yes
EU RoHS Compliant (Y/N): Yes
EU RoHS Compliance Date (mm/dd/yyyy):: 01/01/2004
PLENUM/NON-PLENUM :
Plenum (Y/N): N
ELECTRICAL CHARACTERISTICS :
Nom. Characteristic Impedance: 50 Ω
Nom. Inductance: .18 ?H/ft
Nom. Capacitance Conductor to Conductor @ 1 KHz: 31 pF/ft
Nom. Cap. Cond. to Other Cond. & Shield @ 1 KHz: 58 pF/ft
Nominal Velocity of Propagation: 66 %
Nom. Conductor DC Resistance @ 20 Deg. C: 23.3 Ω/1000 ft
Ind. Pair Nominal Shield DC Resistance @ 20 Deg. C: 15.9 Ω/1000 ft
Max. Operating Voltage - UL: 300 V RMS
Max. Recommended Current: 1.05 Amps per conductor @ 25°C
NOTES :
Notes: Jacket and shield are bonded so both can be removed with automatic stripping equipment.
Beldfoil? provides high reliability with ease of termination.
NOTE:Price per meter |
Reviews
There are no reviews yet.