CAMBRIDGE AUDIO Minx C46 In-Ceiling Speaker (Single)

109.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Virtually invisible, our wide dispersion in-ceiling speaker has been designed to deliver sound discreetly from any position of your choosing. It uses BMR technology for detailed sound output and is small enough to fit in your hand, its tiny 80mm diameter sitting at less than 3mm when mounted into your ceiling. Sensitivity (SPL)    86dB (2.83 […]

 

Read more

Virtually invisible, our wide dispersion in-ceiling speaker has been designed to deliver sound discreetly from any position of your choosing. It uses BMR technology for detailed sound output and is small enough to fit in your hand, its tiny 80mm diameter sitting at less than 3mm when mounted into your ceiling.

Sensitivity (SPL)    86dB (2.83 Vrms input)
Frequency response    120Hz – 20kHz
Impedance    8 Ohms compatible
Recommended amplifier power    15-200 Watts
Drivers    1 x 2.25ʼʼ (57mm) BMR driver
Dimensions    98mm (3.6ʼʼ) height x 88mm (3.4ʼʼ) diameter (inc. outer bezel)
Inside diameter/mounting hole required: 75mm (3ʼʼ)
Weight    0.46kg (1.01 lbs)

Key Features

    Balanced Mode Radiator (BMR) driver combining bending wave technology for higher frequencies, with pistonic driver movement for lower frequencies
    Single BMR driver to seamlessly cover the entire frequency range from 120Hz to 20kHz
    IP65 rated for suitability in high humidity and dusty environments
    Incredibly wide dispersion from the BMR driver fills the room and virtually eliminates any ʽsweet spotʼ problems
    Metal back box integrated into the product
    Fits into standard 75mm (3ʼʼ) ceiling spotlight mounting hole 

 

 

Weight 0.46 kg

Reviews

There are no reviews yet.

Be the first to review “CAMBRIDGE AUDIO Minx C46 In-Ceiling Speaker (Single)”

Your email address will not be published. Required fields are marked *

Quick Comparison

CAMBRIDGE AUDIO Minx C46 In-Ceiling Speaker (Single) removeJBL CONTROL 62P 2-WAY CEILING LOUDSPEAKER 30W -BLACK- removeYAMAHA NS-IC 600 CELEING LOUDSPEAKER 110W (Pair) removeJBL CONTROL 24C Ceiling Speaker 2 Way removeJBL CSS 8018 2-WAY CEILING LOUDSPEAKER 20W 100V removeJBL CSS 8004 2-WAY CEILING LOUDSPEAKER 4'' 15W 100V remove
NameCAMBRIDGE AUDIO Minx C46 In-Ceiling Speaker (Single) removeJBL CONTROL 62P 2-WAY CEILING LOUDSPEAKER 30W -BLACK- removeYAMAHA NS-IC 600 CELEING LOUDSPEAKER 110W (Pair) removeJBL CONTROL 24C Ceiling Speaker 2 Way removeJBL CSS 8018 2-WAY CEILING LOUDSPEAKER 20W 100V removeJBL CSS 8004 2-WAY CEILING LOUDSPEAKER 4'' 15W 100V remove
Image
SKUMinx C46CONTROL 62PS010.31275CONTROL 24CCSS 8018CSS 8004
Rating
Price 109.00 incl. GR VAT 152.99 incl. GR VAT 187.00 incl. GR VAT 166.00 incl. GR VAT 46.61 incl. GR VAT 27.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock

Available on backorder

Available on backorder

In stock

AvailabilityAvailable on backorderAvailable on backorderIn stockAvailable on backorderAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Virtually invisible, our wide dispersion in-ceiling speaker has been designed to deliver sound discreetly from any position of your choosing. It uses BMR technology for detailed sound output and is small enough to fit in your hand, its tiny 80mm diameter sitting at less than 3mm when mounted into your ceiling.

Sensitivity (SPL)    86dB (2.83 Vrms input)
Frequency response    120Hz – 20kHz
Impedance    8 Ohms compatible
Recommended amplifier power    15-200 Watts
Drivers    1 x 2.25ʼʼ (57mm) BMR driver
Dimensions    98mm (3.6ʼʼ) height x 88mm (3.4ʼʼ) diameter (inc. outer bezel)
Inside diameter/mounting hole required: 75mm (3ʼʼ)
Weight    0.46kg (1.01 lbs)

Key Features

    Balanced Mode Radiator (BMR) driver combining bending wave technology for higher frequencies, with pistonic driver movement for lower frequencies
    Single BMR driver to seamlessly cover the entire frequency range from 120Hz to 20kHz
    IP65 rated for suitability in high humidity and dusty environments
    Incredibly wide dispersion from the BMR driver fills the room and virtually eliminates any ʽsweet spotʼ problems
    Metal back box integrated into the product
    Fits into standard 75mm (3ʼʼ) ceiling spotlight mounting hole 

 


 

    * Frequency Response (-10 dB)1: 150 Hz - 20 kHz
    * Frequency Range (±3 dB)1: 200 Hz - 17 kHz
    * Power Capacity:
          o 50 Watts Continuous Program Power (2 hrs)
          o 25 Watts Continuous Pink Noise (2 hrs)
          o 30 Watts Continuous Program Power (100 hrs)
          o 15 Watts Continuous Pink Noise (100 hrs)
    * Nominal Sensitivity:
          o 87 dB (4.0 V, 1 W)
          o 84 dB (2.83 V)
    * Nominal Coverage Angle3: 140° (+25°/-50°)
    * Directivity (Q): 4.7
    * Directivity Index (DI): 6.2 dB
    * Rated Maximum SPL @ 1m: 97 dB continuous pink noise, 103 dB peak
    * Rated Impedance: 16 ohms (no transformer taps)
    * Recommended High-Pass Frequency: 150 Hz

Transducer

    * Driver: 60 mm (2.5 in), polypropylene-coated paper with pure butyl rubber surround, 20 mm (¾ in) copper clad aluminum voice coil with vented Nomex® coil-former.

Enclosure

    * Enclosure Material: High impact polystyrene
    * Grille: Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting)
    * Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 - splashproof rating.
    * Termination: Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.
    * Suspension: Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
    * Safety Agency Ratings: Speaker listed per UL1480, transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®-brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.
    * Dimensions: 128 mm (5.1 in) diameter x 121 mm (4.8 in) height to top of cabinet. 141 mm (5.6 in) to top of suspension bracket.
    * Net Weight (ea): 0.7 kg (1.5 lbs)
    * Shipping Weight (pair): 2.0 kg (4.3 lbs)
    * Included Accessories: Two suspension cable systems (see "Suspension“, above), two 2-pin removable locking euro-block connectors, two rubber covers for euro-block connectors.

Recommended Usage     In-Ceiling Front / Surround Speakers Type     2-way coaxial Woofers     6 1/2” PP (polypropylene) mica cone Tweeters     1” fluid-cooled soft dome Swivel Tweeter and Midrange Driver     (Tweeters) Paintable Grill with Protective Cover Included     Yes Frequency Response     65 Hz – 28 kHz Sensitivity     90 dB (2.83 V, 1 m) Input Power (Maximum / Nominal)     110W / 40W Impedance     8 Ohms Product Dimensions (W x H x D)     9-1/2“x 4-5/8“ Mounting Depth     4-1/4” Product Weight (lbs. each)     3.3

Most compact of the JBL ceiling speakers, the Control 24C contains a coaxially mounted 4" woofer and 3/4" titanium-coated tweeter, providing high-fidelity sound over an extremely wide coverage area.

Specifications:

  • 80 Hz to 20 kHz frequency range (-10 dB)
  • 80 watts continuous program power capacity
  • 86 dB sensitivity (1W/1m)
  • 16 ohms nominal impedance
  • 130° conical coverage (polar)
  • Steel back-can with removable locking connector
  • Dimensions (height x diameter): 7.9" x 7.7" (200 x195 mm)
  • Net Weights: 2.7 kg (6 lbs)
* Driver Size (dual-cone) 200 mm (8 in) * Driver Sensitivity (mid-range) (1W [2.83V], 1m, 2k - 6k Hz) 97 dB * Frequency Range (-10 dB) Driver/Grille Assembly: 50 Hz - 17 kHz o Installed in CSS-BB backcan: 90 Hz - 17 kHz * Coverage (2 kHz) 110° * Driver Continuous Power Handling 20 Watts * 100V Taps 10W, 5W, 2.5W * 70V Taps 10W, 5W, 2.5W, 1.3W * 25V Taps 10W, 5W, 2.5W, 1.3W * Transformer Insertion Loss 1.5 dB Maximum * Transformer Connection Bare wire * Motor Mass 283 g (10 oz) * Safety Agency: Suitable for use in air handling spaces per UL1480, UL2043, NFPA 90 & NFPA 70, when installed with corresponding UL Listed backcan, below. S7232/UL Listed, Signaling Speaker. Transformer UL registered per UL1876. In accordance with IEC60849/EN60849. * Matching CSS Backcan CSS-BB8 (0.15 cu ft) * Bolt Mounting Circle to Backcan 4 points on 286 mm / (11.25 in) diameter * Cutout Diameter o Open-back: 216 mm (8.5 in) o In CSS-BB backcan 295 mm (11.7 in) * Depth (behind grille) 73 mm (2.9 in) * Grille Diameter 327 mm (12.9 in) * Net Weight (ea) 1.58 kg (3.5 lb) * Shipping Weight (ea) 2.25 kg (5.0 lb) * Included Accessories 4 pcs M4 x 40 mm sheet metal screws for attaching speaker/driver/transformer assembly to corresponding backcan.JBL's Commercial Series Ceiling Speakers provide excellent performance for paging and background music applications. High sensitivity across the product line provides maximum sound level, even at low tap settings Features : * High 90 dB sensitivity * 5 Watt multi-tap transformer for 100V, 70V and 25V distributed lines * Very wide 175° coverage * Fits CSS-BB4 backcan
Weight0.46 kg0.70 kg1.50 kg1.50 kg1.58 kg0.90 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.46 kg
Weight 0.70 kg
Weight 1.50 kg
Weight 1.50 kg
Weight 1.58 kg
Weight 0.90 kg