JBL CONTROL 14CT Ceiling Speaker 60W

Control 14CT is a full-range ceiling speaker consisting of a 100 mm (4 inch) high tech cone driver and a 19 mm soft-dome liquid cooled tweeter mounted in a vented, paintable baffle made of UV resistant UL94-V0 and UL94-5HB material, with a pre-attached blind-mount backcan for quick and easy installation. Components: - 100 mm (4.0 in) high output driver with polypropylene cone and butyl rubber surround - 19 mm (0.75 in) soft-dome liquid-cooled tweeter - Blind-mount backcan for quick and easy install - Dual conduit/cable clamps Combined 70V/100V and low impedance direct operation - 30 Watts at 8Ω nominal setting - 25W multi-tap at 70V/100V - 74 Hz ? 20 kHz bandwidth with wide 120° coverage - White or black (-BK)

The JBL Control 24CT MicroPlus is a compact in-ceiling speaker, providing full, high quality sound for background music and music-plus-paging systems. Low distortion, a smooth, natural frequency response, and a 25W transformer make the Control 24CT MicroPlus ideal for medium volume business music. Low frequency output can be augmented with the addition of one of the Control Contractor subwoofer models.

NB.: Priced each (per speaker) and sold in pairs only.

• Type:Ceiling
• Power Rating:25W
• Frequency Response:80 Hz - 25 kHz
• 100 Volt Line:Yes
• Colour:White
  

• TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
• Designed to blend into ceilings with a smooth, low-profile design.
• Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
• Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
• Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
• The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.

JBL Control Contractor Series 26CT Ceiling Speaker The Control 26C is a powerhouse ceiling speaker containing a coaxially mounted
6.5" woofer and 3/4" titanium-coated tweeter, able to deliver maximum sound level
over a wide coverage area. The Control 26CT includes a multitap transformer for a
70V or 100V line distribution system.
Key Features:

�75 Hz to 20 kHz frequency range (-10 dB)

�140 watts continuous program power capacity

�89 dB sensitivity (1W/1m)

�16 ohms nominal impedance

�110° conical coverage (polar)

�Steel back-can with removable locking connector

�Control 26CT 70V taps: 60W, 30W, 15W, 7.5W

�Control 26CT 100V taps: 60W, 30W, 15W.

�Dimensions (height x diameter):  210 mm x 252 mm (8.3 in x 9.9 in)

�Net Weights:  Control 26C = 3.4 kg (7.5 lb), Control 26CT = 4.2 kg (10 lb)

�See Specifications PDF for more details

The JBL Professional Control 227CT is a premium in-ceiling professional loudspeaker designed for applications requiring superior quality sound in ceiling-mount applications. Delivering exceptional next-generation performance in a medium format coaxial point source design, the Control 227CT incorporates breakthrough performance features such as best-in-class pattern control to provide a consistent sound throughout the listening area. Especially wide coverage allows fewer speakers to cover the space, reducing both the material and labor cost for the installation.

The Control 227CT features a 6.5" Kevlar-reinforced low frequency driver coupled with a 1" exit titanium compression driver for enduring reliability and outstanding performance. A top quality, low saturation 60 Watt multi-tap transformer comes pre-attached on the Control 227CT enabling the system to be used on 70V or 100V distributed speaker lines.

The Control 227C and CT are easy to install and feature a removable multi-pin locking connector, with secure screw-down terminals. This allows the for pre-wiring the input wires for easy clip-on convenience during installation. The optional MTC-200BB6 14 cubic liter (0.5 cubic foot) back can is made of extra-thick 16 guage steel and the top is lined with 1/2" medium density fibreboard.

The clean, contemporary look of the MTC-RG6/8 grille for the Control 227C and CT is designed to suit a variety of settings, offering a simple, elegant appearance that fits into a wide variety of décors.

To ensure long life and reliability, Control 227C and CT pass JBLʼs 100-hour torture power test. Nobody in the industry has more demanding reliability standards.

Features

• Consistent 120° broadband pattern control for exceptional coverage
• Coaxial design featuring: Kevlar-reinforced 6.5" woofer; 1" compression driver
• Extraordinary clarity for speech and vocals with extended frequency response for music
• 150 Watts Power Handling
• Advanced high-slope crossover network for constant coverage and smooth, natural midrange
• Integrated back can with clean, contemporary grille (sold separately)

Specifications

• Frequency Range (-10dB): 43Hz - 19kHz
• Frequency Response (-3dB): 75Hz - 17kHz
• Nominal Sensitivity: 90dB measured half-space; 95dB computed for competitive comparison
• Nominal Coverage Angle: 120 degrees conical, broadband
• Nominal Impedance: 8 ohms
• Low Frequency: 6.5" Kevlar reinforced cone
• High Frequency: 1" exit compression driver
• Dimensions (H x Dia.): 12" round baffle x depth from back of baffle of 5.8“

The JBL Professional Control 226C/T is a premium in-ceiling professional loudspeaker designed for applications requiring superior quality sound in ceiling-mount applications. Delivering exceptional next-generation performance in a medium format coaxial point source design, the Control 226C/T incorporates breakthrough performance features such as best-in-class pattern control to provide a consistent sound throughout the listening area. Especially wide coverage allows fewer speakers to cover the space, reducing both the material and labor cost for the installation.

The Control 226C/T features a 6.5" Kevlar-reinforced low frequency driver coupled with a 1" exit titanium compression driver for outstanding reliability and performance. The system is complete with a pre-attached back can and is designed for years of maintenance free use.

Easy to install, the Control 226C/T features JBL Professionalʼs proven C-Ring with Tile Rail suspension system. Installation can be accomplished from beneath the ceiling structure for instances when access above the ceiling tile is not possible. Additionally, the removable multi-pin locking connector, with secure screw-down terminals, allows for prewiring the input wires for easy clip-on convenience during installation.

A top quality, low saturation 60 Watt multi-tap transformer comes pre-attached on the Control 226C/T enabling the system to be used on 70V or 100V distributed speaker lines. The system can be used in either 8 ohm (low impedance) or transformer mode by selecting the desired function via the baffle mounted impedance switch.

The clean, contemporary look of the Control 226C/Tʼs grille is designed to suit a variety of settings, offering a simple, elegant appearance that fits into a wide variety of décors.

Features

• Consistent 120° broadband pattern control forexceptional coverage
• Coaxial design featuring: Kevlar-reinforced 6.5“woofer; 1" compression driver
• Extraordinary clarity for speech and vocals withextended frequency response for music
• 150 Watts Power Handling
• Advanced high-slope crossover network for constantcoverage and smooth, natural midrange
• Integrated back can with clean, contemporary grille

Specifications

• Frequency Response (-10dB): 47Hz to 19kHz
• Sensitivity: 90 dB; 95 dB computed for competitivecomparison
• Coverage Angle: 120 degrees conical, broadband
• Impedance: 8 ohms (in bypass model)
• Tap Settings: A) Common; B) 7.5W @ 70V, 15W @ 100V;C) 15 W @ 70V, 30 W @ 100V; D) 30 W @ 70V, 60 W @ 100V; E) 60 W @ 70V, n/c @100V
• Low Frequency: 6.5" woofer Kevlar reinforced cone
• High Frequency: 1" exit compression driver
• Dimensions (H x Dia): 13" round baffle x depth fromback of baffle of 9.7“