Capsule: Hand-crafted, 1" diaphragm, gold-sputtered
Frequency Response: 20Hz-20kHz
Sensitivity: -32 dBV/Pa (25.1mV/Pa)
Polar Pattern: Cardioid
Impedance: ≤ 200 Ohms
Equivalent Noise Level: 16dB (A-weighted)
Max SPL for 0.5% THD @1kHz: 125dB
Power Requirement: Phantom power 48V±4V
Connector: 3-pin XLR
NT2-A - ?The Legend Continues? Multi Pattern 1? Condenser Microphone.
The new NT2-A carries on the tradition forged by the now legendary R?DE NT2.
A professional large capsule (1?) studio microphone incorporating three-position
pick-up patterns, pad and high pass filter switches conveniently located on the
mic body.
At the heart of the NT2-A is the Australian designed and manufactured HF1 dual
diaphragm capsule. The frequency and transient response of this new transducer
has been voiced to complement today?s modern recording techniques, and yet still
evoke the silky smooth character of the legendary microphones of the 50?s and 60?s.
These features provide the flexibility and superlative audio characteristics that make
the NT2-A one of the most versatile condenser mics available.
The NT2-A?s variable controls allow switching between Omni, Figure 8, and Cardioid
polar patterns. The three position high-pass filter provides a flat response or an 80Hz
and 40Hz high pass filter to be selected. Finally the microphones Pad can be switched
between 0 dB, -5dB and -10dB. The NT2-A comes in a soft pouch with an M2 stand mount.
SPECIFICATIONS:
Features:
The Australian designed and manufactured HF1 1? edge terminated, gold sputtered, dual
5 um diaphragm capsule. 3-position variable polar pattern: Omni, Cardioid & Figure 8; all
controlled on the mic. 3-position variable high-pass filter: Flat, 80 Hz or 40 Hz. 3-position
variable pad: 0 dB, -5 dB or -10 dB. Ultra low noise, transformerless SMT circuitry. Wide
dynamic range. High strength heat-treated steel mesh head. Durable satin nickel finish.
Internal capsule shock mounting. Supplied complete with soft pouch and clip. Designed
and manufactured in Sydney, Australia.
Operation power:
The NT2-A is designed to operate from phantom power to the P48 standard. The NT2-A will
operate between 44V and 52V applied with positive polarity to pin 2 and pin 3 of the output
XLR connector.
Operation output impedance:
The NT2-A will operate satisfactorily into a load impedance as low as 1 kΩ. If a load below this
is used, the output signal level will be reduced. The NT2-A output is balanced between pin 2 (hot)
and pin 3 (cold). Pin 1 is ground.
Acoustic principle: Externally polarized 25 mm (1?) dual diaphragm.
Directional pattern: Multi-pattern
Frequency range: 20 Hz ~ 20 000 Hz
Output impedance: 200 Ω
Signal noise ratio din iec 651:
87 dB (1 kHz rel 1 Pa; per IEC651, IEC268-15)
Equvalent noise: 7 dBA SPL (per IEC651, IEC268-15)
Maximum spl:
147 dB (@ 1% THD into 1 kΩ); 157 dB (@ 1% THD into 1 kΩ) - pad at maximum
Sensitivity: -36 dB re 1 Volt/Pascal; (16 mV @ 94 dB SPL) +/-2 dB
Dynamic range din iec 651: 140 dB (per IEC651, IEC268-15)
Power supply voltage: 48 Volts (P48)
Output connection:
3 pin XLR, balanced output between; pin 2(+) and pin 3(-); Pin 1 ground
Weight with battery: 860 grm
Behringer C-1 Studio Condenser Microphone
Behringer C-1 Studio Condenser Microphone
The C-1 Studio Condenser Microphone from Behringer offers a cardioid pickup pattern for maximum sound source separation and feedback rejection. This low noise microphone is suitable for a wide range of recording scenarios, including project, professional, and home studio applications. There is a pressure gradient transducer and a shock-mounted large diaphragm capsule for open, transparent sound with high-quality transient response. It is constructed of a die-cast metal body for durability and features an LED light to indicate when the microphone is receiving phantom power. The C-1 includes a swivel mount and custom case.
Professional large-diaphragm condenser microphone for unsurpassed audio quality
Ideal as main and support microphone for studio and live applications
Exceptionally flat frequency response and ultra-high sound resolution
Cardioid pickup pattern for outstanding sound source separation and feedback rejection
Ultra low-noise transformerless FET input circuitry
LED indicates phantom power operation
Gold-plated 3-pin XLR output connector for perfect signal transmission
Ultra-rugged construction with die-cast body
Swivel stand mount and carrying case included
Operating Principle
Pressure Gradient
Capsule
Condenser
Diaphragm
0.63" / 16.0 mm
Polar Pattern
Cardioid
Performance
Frequency Range
40 Hz to 20 kHz
Maximum SPL
136 dB SPL
Impedance
100 Ohms
Load Impedance
1000 Ohms
Sensitivity
-33 dB
THD
1%
Connectivity
Output Connectors (Analog)
1 x XLR 3-Pin
Power
Operating Voltage
36 to 52 V
Operating Current Consumption
2.5 µA
Physical
0.93 lb / 0.42 kg
Dimensions
ø: 2.13 x L: 7.09" / ø: 54 x L: 180 mm
Weight
Acoustical operating principle
Pressure gradient transducer
Directional pattern
Cardioid
Frequency range
20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohms
18 mV/Pa
Rated impedance
50 ohms
Rated load impedance
1000 ohms
Equivalent SPL CCIR 468-3
21 dB
Equivalent SPL DIN/IEC 651
10 dB-A
S/N ratio CCIR 468-3
73 dB
S/N ratio DIN/IEC 651
84 dB
Maximum SPL for THD 0.5%
140 dB
Maximum output voltage
13 dBu
Dynamic range of the microphone amplifier DIN/IEC 651
130 dB
Supply voltage
48 V ± 4 V
Current consumption
3 mA
Matching connectors
XLR 3F
Weight
480 g
Diameter
49 mm
Length
175 mm
Variable large diaphragm microphone
Pressure-gradient transducer with double membrane capsule
The studio microphone classic
Three directional characteristics: omni, cardioid, figure-8
Switchable low frequency roll-off
Switchable 10 dB pre-attenuation
Ideal as main and as support microphone in the most differing recording situations
Acoustical operating principle
Pressure gradient transducer
Directional pattern
Omnidirectional, cardioid, figure-8 plus
Frequency range
20 Hz ... 20 kHz
Sensitivity at 1 kHz into 1 kohm
20/28/22 mV/Pa1)
Rated impedance
200 ohms
Rated load impedance
1 kohms
Equivalent noise level, CCIR2)
26/23/25 dB1)
Equivalent noise level, A-weighted2)
15/12/14 dB-A1)
Signal-to-noise ratio, CCIR2) (rel. 94 dB SPL)
68/71/69 dB1)
Signal-to-noise ratio, A-weighted2) (rel. 94 dB SPL)
79/82/80 dB1)
Maximum SPL for THD 0.5%3)
117 dB (cardioid)
Maximum SPL for THD 0.5% with preattenuation3)
127 dB
Maximum output voltage
390 mV
Dynamic range of the microphone amplifier (A-weighted)
105 dB
Supply voltage (P48, IEC 61938)
48 V ± 4 V
Current consumption (P48, IEC 61938)
0.8 mA
Matching connectors
XLR3F
Weight
500 g
Diameter
56 mm
Length
200 mm
The RODE NT1-A has become an industry standard; delivering the warmth, extended dynamic range, clarity and high SPL capability usually only featured by some of the most expensive microphones.
Now available as the \'Complete Vocal Recording Solution\' this NT1-A package now includes everything you need to get truly professional vocal recordings - the world\'s quietest studio microphone, a studio grade pop shield and shock mount, a premium 20\' cable, dust cover, an instructional DVD with recording tips, and of course R DE\'s industry leading ten year warranty.
Large 1" (25mm) capsule with gold plated diaphragm
Cardioid polar pattern
Self noise of only 5dB (A)
Ultra low noise, transformerless surface mount circuitry
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.