| Content |
Bi-amplified Studio Monitor with Magnetically-Shielded 5'' Low Frequency Transducer and 1'' Soft-Dome High Frequency Transducer and Image Control Wave Guide. Class-D 56 Watt RMS Amplifier for LF, and 56 Watt RMS Amplifier for HF. Frequency response 37Hz - 24kHz and Peak SPL 112dB. Balanced XLR and 1/4 Inputs with Dented Level Control, HF and LF Trim Controls. Weight 8,6 kg. |
DM-2100: 2.1-ch Speaker System
Features The DM-2100 2.1-ch Speaker System is an affordable way to add accurate reference monitoring with a subwoofer for enhanced bass response. The left and right speakers each offer 15 watts of power, while the 50-watt subwoofer provides a powerful low-end boost. And with 24-bit/96kHz digital inputs, the DM-2100 is perfect for use with Roland/BOSS digital studios and instruments, or with computer systems and more.
- Affordable 2.1-channel monitoring system with 24-bit/96kHz digital inputs
- Powered bass reflex speakers with 15 watts per side and flat frequency response
- Active subwoofer with 50-watt amplifier for increased low end
- Front-mounted controls convenient located on right speaker
- Coaxial and optical digital inputs, plus analog inputs (RCA and 1/4-inch type)
- Sleek black wooden cabinets with magnetic shielding
Rated Output Power50W + 15W + 15WSpeakerSubwoofer: 16cm, Satellite Units: 9.2cmNominal Input LevelLine 1: -10dBu, Line 2: -10dBuInput Impedance18k ohmControlsR Channel: Bass Control Knob, Treble Control Knob, Volume 1 (Digital In/ RCA pin), Volume 2 (1/4” phone), Power Switch, Digital Input Select Switch, Phase SwitchConnectorsR Channel: Line 1 Jack (L, R; RCA pin), Line 2 Jack (L (MONO), R; 1/4” phone), Optical Input Connector, Coaxial Input Connector, Dedicated connector for power control and audio signal, Channel Input Jack (R; RCA pin),
L Channel: Channel Input Jack (L; RCA pin),
Sub Woofer: Dedicated connector for power control and audio signal, Channel Output Jacks (L, R; RCA pin), AC In JackDigital InputSampling Rate 32/44.1/48/96 kHz, D/A Convertor 24 bitsPower SupplyAC117, 230 or 240VAccessoriesSpeaker Cables (RCA pin type), Dedicated Cable for power control and audio signal, Power CableSize and Weight ( Satellite Units )Width130 mm5-1/8 inchesDepth160 mm6-5/16 inchesHeight200 mm7-7/8 inchesWeight
Size and Weight ( SubWoofer )Width240 mm9-1/2 inchesDepth300 mm11-13/16 inchesHeight330 mm13 inches
|
PRICE PER UNIT
S3X-V
Using the newly developed 4” HexaCone midrange and 9” HexaCone woofer combined together with the X-ART tweeter creates the unique S3X-V control monitor.
A step up over the smaller models, the S3X-V is capable of producing more power and volume along with a more detailed and homogeneous sound that will impress even the most experienced sound engineer. Whether the complex sonic images of an orchestra or the smooth tone of a jazz trio, the S3X-V reveals even the finest nuances of any material. The driver assembly of the S3X-V allows long time, non-fatiguing listening sessions.
Reviews: "Wonderfully detailed...”
“Wonderfully detailed, with an exceptionally transparent mid-range. [...] ADAM make the leap to a three-way speaker design that seems to pay dividends in clarity and separation. [...] I think it would be fair to say theyʽre the best sounding ADAM monitors Iʽve reviewed.” (Sound On Sound, 12/2009)
“No doubt, the S3X-V deserve the title Reference Monitor. With this series, ADAM Audio proves to have a very good feeling for meeting the specific demands of the sound engineerʽs guild, creating studio standards at the same time. [...] A precision tool combined with a luxury good.” (www.96kHz.de, 03/2010)
| Woofer |
| | Number | 1 | | Basket Ø | 9" (228 mm) | | Voice coil Ø | 2" (50 mm) | | Cone material | HexaCone | | Midrange |
| | Number | 1 | | Basket Ø | 4.5" (116 mm) | | Voice coil Ø | 1" (25 mm) | | Cone material | HexaCone | | Tweeter |
| | Number | 1 | | Type | X-ART | | Diaphragm area | 4 inch² (2420 mm²) | | Equiv. Diaphragm Ø | 2" (56 mm) | | Velocity transform ratio | 4:1 | | Diaphragm weight | 0.17 g | | Built-in Amplifiers |
| | Woofer | 1 | | Type | PWM | | Amp. power RMS / music | 250 W / 350 W | | Midrange | 1 | | Type | PWM | | Amp. power RMS / music | 250 W / 350 W | | Tweeter | 1 | | Type | A/B | | Amp. power RMS / music | 50 W / 100 W | | Control panel |
| | Input Sensitivity (coarse) | -20 to +8 dB (4 dB steps) | | Input Sensitivity (fine) | -1.5 to +2 dB (0.5 dB steps) | | EQ 80 Hz | 0 to +6 dB (1 dB steps) | | High Shelf EQ > 6 kHz | ±4 dB (1 dB steps) | | Low Shelf EQ | ±4 dB (1 dB steps) | | Tweeter gain | ±2 dB (0.5 dB steps) | | Input connectors |
| | Analog | XLR | | Digital (optional) | AES/EBU / SPDIF / word clock | | General data |
| | Panel | Front | | Frequency response | 32 Hz - 50 kHz | | THD > 80 Hz | ≤0.6 % | | Long term output | ≥114 dB | | Max. peak | ≥124 dB | | Crossover frequencies | 350 / 2800 Hz | | Input impedance | 10 KOhm | | Weight | 34 lb (15,4 kg) | | Magnetically shielded | Optional | | Height x Width x Depth | 19" (485 mm) x 11" (281 mm) x 11.5" (295 mm) | | Warranty | 5 Years |
| Delivery contents | |
Power cord, Manual
|
|
The Solo6 Be monitor will surprise you in the very first minutes you spend with it, partly due to its size/extended bass response (40Hz at -3dB). The 6.5" "W” composite sandwich mid-woofer combines neutrality in the midrange, fullness in the midbass register and bass control. Its compactness and the choice of a large front laminar port guarantee easy integration in studios that need a near field monitor without any acoustic compromise. The user settings on the back of the Solo6 Be, combined with its compactness, make it easy to carry and to adjust according to the acoustics of each studio.
Specifications | Frequency response : | 40Hz - 40kHz | | Maximum SPL : | 113dB SPL (peak @ 1m) | |
Input :
|
Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV
| | Bass/mid-range : | 150W rms, BASH® technology | | Treble : | 100W rms, AB class | |
Electric supply :
|
Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire
| |
Visualization and control :
|
Input sensitivity selector
Adjustable tweeter and woofer levels with potentiometers
Power On/off switch
Voltage selector
| | warning light : | Power on LED | |
Electric supply :
|
Local supply power: 230V (1.6A fuse)
115V (3.5A fuse)
Connection: removable IEC supply wire
| | Woofer : | 6W4370B, 6-1/2" (16.5cm) Focal "W" composite sandwich cone speaker | | Tweeter : | Focal TB871 Beryllium inverted dome tweeter | | transducer shielding : | Integral through cancellation magnets or by magnet design | | Box : | 7-1/2" (19mm) MDF panels | |
Finish :
|
Dark red natural veneering side panels, black body
| | Dimensions (HxWxD) : | 13 x 9-7/16 x 11-7/16 " (330x240x290mm) | | Weight : | 24.2lb (11kg) |
|
Features
Professional 2-way active DJ monitors
Output: 2x 30 W RMS
Frequency response: 35 Hz - 20 kHz
S/N Ratio: > 75 dB
Impedance: 8 ohm
Magnetically shielded bass drivers
Speakers: 13.34 cm (5.25“) bass, 2.54 cm (1“) tweeter
Technical Data
Dimensions: 232 x 320 x 180 mm
Weight: 5.0 kg (per piece)
|
PRICE PER UNIT
The most powerful AX monitor With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields. The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill. Cabinet- and bass reflex-construction Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil. Amplification and controls With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series. On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application. Review: A8X: a "powerful link" between near- and midfield monitors! "The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010) | Mid-Woofer |
| | Number | 1 | | Basket Ø | 8.5" (220 mm) | | Voice coil Ø | 1.5" (38 mm) | | Cone material | Carbon/Rohacell/Glass Fiber | | Tweeter |
| | Number | 1 | | Type | X-ART | | Diaphragm area | 4 inch² (2420 mm²) | | Equiv. Diaphragm Ø | 2" (56 mm) | | Velocity transform ratio | 4:1 | | Diaphragm weight | 0.17 g | | Built-in Amplifiers |
| | Mid-Woofer | 1 | | Type | PWM | | Amp. power RMS / music | 150 W / 225 W | | Tweeter | 1 | | Type | A/B | | Amp. power RMS / music | 50 W / 75 W | | Control panel |
| | Input Sensitivity | -∞ to +14 dB | | High Shelf EQ > 5 kHz | ±6 dB | | Low Shelf EQ | ±6 dB | | Tweeter gain | ±4 dB | | Input connectors |
| | Analog | XLR / RCA | | General data |
| | Frequency response | 38 Hz - 50 kHz | | THD 90dB/1m > 100 Hz | ≤0.5 % | | Long term output | ≥112 dB | | Max. peak | ≥120 dB | | Crossover frequencies | 2300 Hz | | Input impedance | 30 KOhm | | Weight | 28.7 lb (13 kg) | | Magnetically shielded | No | | Height x Width x Depth | 15.5" (400 mm) x 10" (255 mm) x 12.5" (320 mm) | | Warranty | 5 Years |
| Delivery contents | | Power cord, Manual |
|
Reviews
There are no reviews yet.