| Content |
Versatile, omnidirectional small-diaphragm
Back-Electret transducer for theater and live applications requiring minimum visibility.
Achieves low distortion, fast attack, high sensitivity and wide dynamic range.
Flexible and foldable earpieces with slidable boom.
AKG™, SHURE™ and SENNHEISER™ adapters are included for different bodypack matchings.
Leather case, Skin color (Beige).
TECHNICAL INFO:
- Transducer type: Back-Electret Condenser Microphone
- Polar pattern: Omnidirectional
- Power Supply: 1.5 - 12V DC
- Frequency response: 20Hz ÷ 20kHz ±3dB
- Sensitivity in free field: -45dB ±3dB (0dB=1V/Pa @1kHz)
- THD: |
Transducer Condenser
Polar Pattern Omnidirectional
Frequency Response 30Hz to 20kHz +/- 3dB
Dynamic Range (Typical) Not Specified by Manufacturer
Signal-to-Noise Ratio Equivalent Acoustic Noise: 29dBA SPL
Maximum Input Sound Level 130dB SPL
Power Requirements Operating Current: 500uA
Operating Voltage: 1 to 2V
Power Supply Voltage:
+3V with 2.7k ohm Load
+5V with 6.8k ohm Load
+9V with 15k ohm Load
Output Impedance 2k ohms
Output Connectors TA4-Female Connector for Shure Wireless Transmitters
Dimensions Not Specified by Manufacturer
Weight 0.07 oz (2g) | High-quality permanently polarized condenser headmic with omni-directional pick-up pattern, designed for professional "hands free” applications. The adjustable neckband is visually unobtrusive and very comfortable to wear. The twelve available HSP 2 variants differ in color, size and connector.
| Τype: |
Headset |
| Series Compatibility: |
Εvolution Wireless |
|
Headset vocal condenser microphone for wired or wireless applications.
The Audix HT2P is a professional head-worn microphone designed for use in performances, aerobics instruction, presentations and more. The HT2P features a frequency response of 50Hz to 15kHz, reproducing audio frequencies associated with vocals with pristine fidelity while eliminating noise at low frequency ranges. The HT2P features a hyper-cardioid polar pattern. The hyper-cardioid pattern provides excellent off-axis signal rejection, minimizing noise due to audio monitors, ambiance, other musicians and more. The headset itself is lightweight and padded for extra comfort, the capsule is completely resistant to moisture
| Suggested for Speech, Head-worn microphone, Sports/Aerobics
- Ergonomically optimized behind-the-neck headband
- Moisture shield
- External shock mount for high mechanical-noise rejection
The C 544 L is a head-worn miniature condenser microphone with a convenient behind-the-neck headband. The microphone has a cardioid polar pattern and therefore "prefers” sounds arriving from the front (from the userʼs mouth).
The microphone body containing the condenser transducer is shock mounted on the microphone arm in order to suppress cable and mechanical noise. The microphone arm will place the microphone in front of the corner of your mouth to minimize pop noise and protect the microphone from contamination. The supplied windscreen makes the microphone even less susceptible to wind and pop noise.
A special moisture shield on the microphone capsule makes it difficult for moisture and makeup to penetrate into the microphone. This barrier prevents the microphone sound entries from being clogged by sweat or makeup which would make the sound dull and reduce the sensitivity of the microphone. Therefore, never remove the moisture shield from the microphone.
The C 544 L is a condenser microphone and therefore needs a power supply.
| Type |
Pre-polarized condenser microphone |
| Polar pattern |
cardioid |
| Frequency range |
20 Hz to 20,000 Hz |
| Sensitivity |
40 mV/Pa (-28 dBV re 1 V/Pa) |
| Max. SPL |
126 dB / 130 dB (for 1%/3% THD) |
| Equivalent noise level (IEC 60268-4) |
22 dB-A |
| Impedance |
200 ohms, electronically balanced |
| Recommended load impedance |
>2000 ohms |
| Supply voltage |
9 V battery supply through B 29 L or bodypack transmitter, or 9 to 52 V universal phantom power through MPA V L adapter |
| Powering |
approx. 2 mA |
| Environment |
temperature: -20°C to +60°C, R.H. at +20°C: 99% |
| Cable |
1.5 m (5 ft.) |
| Finish |
matte black |
| Dimensions |
130 mm (5.2 in.) in dia. |
| Net weight |
30 g (1.1 oz.) exc. of connector |
| Shipping weight |
200 g / 7.1 oz. |
|
ansducer Type
Electret condenser
Polar Pattern
Omnidirectional
Frequency Response
20 to 20,000 Hz
Output Impedance
N / A
Sensitivity (open circuit voltage, @ 1 kHz, typical)
-41 dBV/Pa (9 mV)
Maximum SPL (1 kHz at 1% THD)
2500 Ω load: 107 dB SPL
1000 Ω load: 107 dB SPL
Signal-To-Noise Ratio
60 dB
Dynamic Range @ 1 kHz
2500 Ω load: 73 dB
1000 Ω load: 73 dB
Self-Noise (equivalent SPL, A-weighted, typical)
34 dB
Operating Temperature Range
-18°C (0°F) to 57°C (135°F)
Polarity
Positive pressure on diaphragm produces negative voltage on pin 3 with respect to pin 1
Power Requirements
+5 V DC (130 μA minimum)
Weight
19.76 g
|
Reviews
There are no reviews yet.