| Content |
Fostex PM0.5MKII Powered Monitor Pair
Fostex employed the latest cone material technology to obtain extremely pure music reproduction
in their PM0.5 Powered Monitor Pair. The attractive biamped cab provides 40W to the 5" LF driver
and 30W to the extremely responsive .75" soft-dome tweeter. The Fostex PM.05 Cone is made of
resin-impregnated aromatic polyamide fibers for high rigidity and optimum damping. Thermally adhered
Olefin film controls frequency response and adds durability. Low distortion comes from high-purity copper
wire in the coil. 40Hz to 22kHz frequency response. Perfect for home studios.
Fostex PM0.5 Powered Monitor Pair Features:
5" LF driver
.75" soft dome tweeter
High-tech cone materials
Very low distortion
XLR/6mm jack input with gain control
Fostex PM0.5 Powered Monitor Pair Specifications:
Acoustic section:
±2dB, 50Hz to 20kHz free field frequency response
40Hz low freq. cutoff
22kHz high freq. cutoff
Maximum short term SPL 80Hz - 3kHz >
105dB SPL 1m
Amplifier section:
40W + 30W output
|
The Genelec 5040B is an extremely compact active subwoofer designed to complement up to five 6010B's with accurate and dynamic bass response reaching down to 35 Hz. Matched perfectly with the 6010B's, the 5040B conveniently features a remote volume control allowing adjustment of the entire sound system as well as versatile acoustic controls for perfect room integration.
Our Intelligent Signal Sensing (ISS) feature, reduces power consumption to less than 0.5 watts by automatically switching the active monitor to standby, when no audio signal has been detected for some time. When it receives an audio signal again, the loudspeaker turns back on.
ISS is fully compliant with the latest EU requirements and the ErP 2013 Directive for electronic devices.
Designed by Genelec's R&D team in co-operation with internationally acclaimed Finnish designer Harri Koskinen, the 5040B subwoofer features an unobtrusive, modern appearance.
The 5040B features a magnetically shielded downward firing 6 1/2" bass driver attached to a die-cast aluminium base plate.
The base plate also serves as the chassis for the 40 Watt amplifier and crossover filter circuitry. The 5040B packs a respectable punch of 98 dB maximum sound pressure level
| 98 dB | | Main 35 - 85 Hz (± 3 dB)
LFE 35 - 120 Hz (± 3 dB) | | 0 to -270° (90° steps) | | 6.5" Active | | 40 W | | H x D 251 x 305 mm | | 6.3 Kg (13.9 lb) | | 5.1 RCA analog in
1 x 3.5 mm stereo jack in
5 x RCA analog out |
|
Genelec SE7261A Active DSP Subwoofer brings the flexibility and accuracy of room response equalization to smaller production environment. At the heart of the Genelec SETM (Small Environment) DSP loudspeaker system is the SE7261A DSP subwoofer with DSP processing.
The SE7261A DSP subwoofer provides all necessary network connections to the host computer and supply extensive DSP resources through its eight AES/EBU high-passed channels to the 8130A active loudspeakers.
The proprietary GLM.SETMsoftware kit includes a measurement microphone, AutoCalTM function and other key features of the standard GLM software.
| 108 dB | | Main 19 - 100 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB) | | GLM tone controls | | 10“ | | 120 W | | H x W x D 527 x 462 x 363 mm | | 27 Kg (59 lb) | | 4 x XLR digital in
4 x XLR digital out
(8 channels AES/EBU) |
|
Product details
| Woofer: | 10-inch black Glass-Composite Cone | | Frequency response: | 20Hz - 200Hz | | Crossover frequency: | 50Hz - 130Hz adjustable | | Amplifier Power: | 300W | | S/N Ratio (A weighted): | >95dB | | THD + N @ Rated Power: | 0.08% | | Inputs: | 2x XLR, 2x TRS, 2x RCA Connectors | | Outputs: | 2x XLR, 2x TRS, 1x XLR balanced (Sub out) Connectors | | Input Impedance: | 20 kOhm balanced, 10 kOhm unbalanced | | Phase reverse: | 0 / 180° switch | | Ground Lift switch: | On / Off | | Bypass Footswitch: | On / Off | | Available colors: | Red, Black | | Net weight: | 17.6kg / 38.7lb | | Net Dimensions: | L385 x W340 x H390 mm
L15.16 x W13.39 x H15.35 in |
|
Genelec 7071A Active Subwoofer is powerful and precise bass monitoring tool for modern 6.1 or 5.1 channel Surround Sound or traditional stereo systems. With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile bass management systems, it can be adapted to all low frequency monitoring situations.
The amplifier unit integrated into the cabinet contains active crossover filters, driver overload protection circuits and power amplifiers.
The in-built bass management unit has six signal input and output channels, summed signal output connectors and LFE input equipped with a selectable 85/120 Hz lowpass filter and a 0 / +10dB LFE sensitivity switch.
| 118 dB | | Main 19 - 85 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB) | | 0 to -270° (90° steps) | | 2 x 12“ | | 500 W | | H x W x D 755 x 803 x 490 mm | | 81 Kg (178 lb) | | 6.1 XLR analog in
6 x XLR analog out
1 x XLR Link out |
|
The Sub6 is a large volume cabinet design, equipped with an 11" woofer and a rear laminar port. This configuration guarantees bass linearity whatever the intended SPL. The control board is extremely versatile, with connectivity which allows a 2.1, 2.2 and multichannel use via the L/R inputs and outputs and the LFE. The numerous settings such as the high-pass crossover dedicated to monitors, the adjustable phase and level control provide optimum coupling with the Solo6 Be and the Twin6 Be monitors. And finally, a small, but important point: the footswitch input. It enables one to connect a pedal to deactivate the subwoofer and the high-pass crossovers on the outputs that supply the monitors. This simplifies and greatly improves control during the different stages in monitoring.
Specifications | Frequency response : | 30Hz - 250Hz | | Maximum SPL : | 116dB SPL (peak @ 1m) | |
Input :
|
Right, left, LFE
Electronically balanced, 10 kOhms
XLR 3 points socket
Adjustable
| | Outputs (towards speakers) : | Type/Impedance: Electronically balanced / 50 Ohms - Connector: XLR 3 points plug | |
Amplification :
|
350W rms, BASH® technology
| |
Signal internal treatment :
|
Subwoofer section: Mono right/left summation
LFE + mono low-pass
24dB/octave
Phase adjustment
Polarity selection switch
Switch high-pass filter, cut-off frequency selection
Speaker section : 24 dB / octave
| |
Electric supply :
|
Local supply wire: 230V (1.6A fuse)
or 115V (3.5A fuse)
Connection: removable IEC supply wire
| |
Visualization and control :
|
Adjustable subwoofer level
Low-pass cut-off frequency setting
Phase adjustment
Polarity adjustment
Subwoofer switch (mute)
2.1 "Bypass" (external remote contol)
High-pass frequency selection
Releasable high-pass
| | warning light : | Power on LED, Subwoofer switch (mute), Released high-pass | |
Electric supply :
|
Local supply wire: 230V (1.6A fuse)
or 115V (3.5A fuse)
Connection: removable IEC supply wire
| | Subwoofer : | 11W7670, 10-5/8" (27cm) Focal "W" composite sandwich cone driver | | Box : | 7-1/2" (19mm) MDF panels | |
Finish :
|
Dark red natural veneering side panels, black body.
| | Dimensions (HxWxD) : | 14-15/16 x 13-9/16 x 17-5/16 " (380 x 344 x 440mm) | | Weight : | 50.7lb (23kg) |
|
Reviews
There are no reviews yet.