| Content |
The PS-9116 from Inter-M Americas is a rack mountable 16-zone direct speaker selector with two input channels. You can choose to send audio to all 16 output channels, divide the channels into two groups of eight, or individually select channels. Each channel button has a built-in LED indicator to show active/inactive status.
Remote control terminals allow you to select all channels, group 1, or group 2 remotely. The unit operates on 24VDC power, so you'll still be up and running during blackouts and emergencies. Handles on the front of the unit make it easy to install and uninstall from a standard audio rack.
• Rack mountable 16-zone direct speaker selector • Two input channels • Selection choices include all channels, one or two groups of eight channels, or individually-selected channels • Each channel switch has an LED indicator for selected/deselected status • Operates on 24VDC power, so you don't have to worry about blackouts or emergency situations • Remote control terminals for selecting all channels or group 1/2 • Front-panel handles for easy installation and removal
Dimensions (WxHxD)19 x 1.75 x 11" (483 x 44 x 280mm) Weight7.5 lbs (3.4kg)
|
The ATT-30 from Inter-M Americas is a one-gang wall panel attenuator. The knob has four clearly-labeled steps to make easy adjustments. A screwless terminal block simplifies installation, and the sleek, modern design fits into any environment. The attenuator can handle up to 30W. |
Volume Control 12W with priority.
|
| | - SYSTEM POWER CONTROL You can control the power of your system by using this model. - AC AND DC POWER SUPPLY You can distribute AC and DC power through the AC outlet and DC terminals on the rear panel. - USE OF EMERGENCY POWER SUPPLY For emergency equipment power supply, an extra DC terminal is provided. - REMOTE CONTROL You can control the system power by remote control function even though the power switch on front is off. - AC AND DC VOLT METER This model uses digital volt meter displays of AC and DC. - OPERATING MODE DISPLAY You can easily check the operating mode by LEDs, AC or DC operating and emergency power. | | | | | | PD-659 | | AC Outlet | Switched 2000W ⅹ3 | | Unswitched 700W ⅹ1 | | Remote Control | 1 | | DC Power Output | DC 24V 5A | | Operation Temperature | -10℃~+40℃ | | Power Source | 100-120VAC or 220-240VAC; 50/60Hz (Supplied ACmains transformer depends on country requirements) | | Power Consumption | 190W | | Weight(SET) | 6.2Kg/13.6Ib | | Dimension(SET) | 482(W) x 88(H) x 380(D)mm/19(W) x 3.5(H) x 15(D)in | | ※ Specifications and design subject to change without notice. | | | |
|
| - CONSIDERATION OF USERʼS CONVENIENCE NUMERIC buttons and various function buttons are separated for timer program enter and convenience in use so that the user can easily operate. - ADOPTION OF VACUUM FLUORESCENT DISPLAY PANEL Adopting a vacuum fluorescent display of a dot matrix method enables to check operation status of each function at a glimpse. - PROGRAMMING USING A PC You can easily execute reservation setting thorough management program by connecting a PC to the RS-232C port. - VARIOUS MELODY AND SOUND OUTPUT You can generate various melodies and sounds by linking the flash memory mounted on this unit to our model, PV-632 (MULTI-VOICE FILE). - AC POWER OUTPUT CONTROL When PW-642 and other equipment are connected via the AC outlet terminal of PW-642, you can turn ON/OFF the AC outlet button in the front panel and manually control ON/OFF of the AC power connected to other device. - BACK-UP POWER You can continue to maintain the time counter for about a week though the inner back-up even though AC power turns off with current time set. There is no need of readjusting time even though AC power is applied. - MEASURE AGAINST POWER FAILURE A separate memory is used to prevent data extinguishment due to power failure or other unstable power. - AUTOMATIC RETURN In programming data using a key button on the front side of PW-642 without using a PC, no pressing any button is recognized as cancel of program entry to return to normal operation status. - AC POWER OUTPUT TIME ADJUSTMENT You can adjust the AC power output time of PW-642 by 1~20sec to prevent time delay from occurring in the interface with the outside power amp. - KEY LOCK You can protect reservations and userʼs setting. |
|
|
| | | PW - 642 | | Input Channel (Balanced) | 5CH | | Output Channel (Balanced) | 4CH | | Output Level | Maximum 1v | | AC Power Output 1 | Maximum 500W | | AC Power Output 2 | Maximum 30 w | | Data Preservation Time | 7 days and more | | Melody Time (15 settings total - 247 seconds) | No.1 | 2 seconds | | No.2 | 3 Seconds | | No.3 | 3 Seconds | | No.4 | 5 Seconds | | No.5 | 5 Seconds | | No.6 | 7 Seconds | | No.7 | 7 Seconds | | No.8 | 10 Seconds | | No.9 | 10 Seconds | | No.10 | 15 Seconds | | No.11 | 20 Seconds | | No.12 | 30 Seconds | | No.13 | 30 Seconds | | No.14 | 40 Seconds | | No15 | 60 Seconds | | Operation Temperature | -10°C ~+ 40°C | | Power Source | 100- 120 VAC or 220 -240VAC; 50/60 Hz (Supplied AC mains transformer depends on country requirements) | | Power Consumption | 10W | | Weight(SET) | 5.7Kg/12.6Ib | | Dimension(SET) | 482(W) x 88(H) x 380(D)mm/19(W) x 3.5(H) x 15(D)in | | ※ Specifications and design subject to change without notice. | | | |
|
toa-at-100upr Build-in Attenuator with Relay
Toa - 100V installation
Build-in Attenuator with Relay 100 W / 100 V
|
Reviews
There are no reviews yet.