Korg CR-4 4-Track Cassette Recorder

Discontinued

350.92 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Korg CR-4 4-Track Cassette Recorder Introducing the CR-4, a 4-track multitrack cassette tape recorder that offers the best of all worlds ? affordable multi-track recording, amazing-sounding digital effects and EQ, plus built-in amplifier and speakers. Four Tracks of Recording PowerWhen you plug into the CR-4, you harness the recording expertise of Korg?s acclaimed multi-track recorders […]

 

Read more

Korg CR-4 4-Track Cassette Recorder

Introducing the CR-4, a 4-track multitrack cassette tape recorder that offers the best of all worlds ? affordable multi-track recording, amazing-sounding digital effects and EQ, plus built-in amplifier and speakers.

Four Tracks of Recording Power
When you plug into the CR-4, you harness the recording expertise of Korg?s acclaimed multi-track recorders in a cost-effective, 4-track cassette alternative. With four 1/4″ inputs ? one for each track ? you can record up to four tracks at once. Each track is recorded onto a standard, high-quality chrome high-bias (Type 2) cassette tape.

REMS Modeling Built-in
The CR-4 delivers a wide range of realistic amp and effect sounds powered by Korg ?REMS? modeling technology acclaimed by guitarists and bassists worldwide. It features six essential guitar amp models, two bass amps, an acoustic guitar EQ and even two vocal mic? simulators, so you can get incredibly realistic sound while recording direct. Plus, when you plug into the CR-4, you can choose from a selection of eleven great ToneWorks effects models like chorus, flanger, tremolo, delay, reverb and more.

Dedicated Knobs Make Amp and Effect Adjustments a Snap
The CR-4 has five controls (Gain, Treble, Middle, Bass & Volume) for the guitar, bass guitar, acoustic guitar and vocal models. In addition, the CR-4 includes an effect depth knob, a tap tempo switch for modifying delay time and modulation speed, and a dedicated noise reduction switch.

The Easiest 4-track Ever
Getting great sound for recording is easier than ever with the CR-4. All of the effect and amp models are accessed using two dedicated select knobs. Simply dial in the amp and effect you need and push the effect select switch on your track. Each track has its own trim knob, volume slider, pan knob and effect switch. Just plug into the track you want to record on, press the record select switch and go.

Built-in Amp and Speakers
The CR-4 comes equipped with two speakers in bass reflex enclosures, providing you with a lot of options. You can listen to your recording play back through the speakers. Or, you can plug into any track on the CR-4, select an amp and effect, and use the CR-4 as a 5-Watt practice amp. You can perfect your performance and record it all using one unit! Plus, because the CR-4 records and plays back cassettes at standard speed, you can also use it for listening to pre-recorded cassette tapes. The speakers can be turned off for silent playback while recording.

All the Right Outs
Once you mix down your recording, you can record it to another device using the CR-4?s stereo RCA outputs. Of course, the CR-4 also comes with two headphone outputs so that you can listen to other recorded tracks while your adding another track to the mix. Because there are two outputs, both you and a friend can hear what?s going on and record or mix together.

Power:
  5 Watts(2.5W + 2.5W)
 
  Speakers:
  2 x 8cm
 
  Number of Tracks/Mixer channels:
  4 Tracks/4 Mixers
 
  Number of simultaneous recording tracks:
  4 Tracks
 
  Number of Inputs:
  4 Inputs (1/4″ Phone jack)
 
  Number of Outputs:
  2 Outputs (RCA/phono)
 
  Number of Panpots:
  4 (Center click)
 
  Number of Input Trims:
  4 (-50dBv to -10dBv)
 
  Tape speed:
  4.76cm/sec (capable of playing back ordinary stereo music tape)
 
  Type of tape:
  Chrome High-Bias (Type2)
 
  Headphone:
  2 (1/4 inch phone jack)
 
  Control knobs:
  Gain, Bass, Middle, Treble, Volume
 
  Modeling type select knob:
  Guitar x 6 (BTQ CLN/BLK212/AC30TB/UK80’/UK MDN/NU METAL),
Bass x 2 (VALVE/LA STUDIO),
Acoustic guitar x 1 (AC EQ),
Vocal x 2 (VOCAL1/VOCAL2)
 
  Effects select knob:
  11 types (COMP / WAH / CHORUS / FLANGER / PHASER / TREMOLO / ROTARY / DELAY / REVERB / CHO+DL / CHO+RV)

Effect Depth knob

Tap Switch

Noise reduction

Speaker ON/OFF switch

 

  Included accessories:
  AC/DC adapter
 
  Dimensions:
  17.08 (W) x 3.94 (H) x 12.6 (D) in.
434(W) x 100(H) x 320(D)
 
  Weight:
  11 lbs./5Kg
Weight 5.00 kg

Reviews

There are no reviews yet.

Be the first to review “Korg CR-4 4-Track Cassette Recorder”

Your email address will not be published. Required fields are marked *

Quick Comparison

Korg CR-4 4-Track Cassette Recorder removeTASCAM DR-60D MKII Handheld Recorder removeKORG TMR-50 BK Digital metronome, tuner and recorder removeTOA D-2012C Remote Console Unit removeZOOM APH-2N Accessory Pack for H2N removeTASCAM DR-70D Digital portable recorder remove
NameKorg CR-4 4-Track Cassette Recorder removeTASCAM DR-60D MKII Handheld Recorder removeKORG TMR-50 BK Digital metronome, tuner and recorder removeTOA D-2012C Remote Console Unit removeZOOM APH-2N Accessory Pack for H2N removeTASCAM DR-70D Digital portable recorder remove
Image
SKUCR-4TA/EM/000491TMR-50-BKD-2012CG30ZM00007TAEM000574
Rating
Price 350.92 incl. GR VAT 231.00 incl. GR VAT 51.35 incl. GR VAT 5,800.00 incl. GR VAT 38.00 incl. GR VAT 340.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Korg CR-4 4-Track Cassette Recorder

Introducing the CR-4, a 4-track multitrack cassette tape recorder that offers the best of all worlds ? affordable multi-track recording, amazing-sounding digital effects and EQ, plus built-in amplifier and speakers.

Four Tracks of Recording Power
When you plug into the CR-4, you harness the recording expertise of Korg?s acclaimed multi-track recorders in a cost-effective, 4-track cassette alternative. With four 1/4" inputs ? one for each track ? you can record up to four tracks at once. Each track is recorded onto a standard, high-quality chrome high-bias (Type 2) cassette tape.

REMS Modeling Built-in
The CR-4 delivers a wide range of realistic amp and effect sounds powered by Korg ?REMS? modeling technology acclaimed by guitarists and bassists worldwide. It features six essential guitar amp models, two bass amps, an acoustic guitar EQ and even two vocal mic? simulators, so you can get incredibly realistic sound while recording direct. Plus, when you plug into the CR-4, you can choose from a selection of eleven great ToneWorks effects models like chorus, flanger, tremolo, delay, reverb and more.

Dedicated Knobs Make Amp and Effect Adjustments a Snap
The CR-4 has five controls (Gain, Treble, Middle, Bass & Volume) for the guitar, bass guitar, acoustic guitar and vocal models. In addition, the CR-4 includes an effect depth knob, a tap tempo switch for modifying delay time and modulation speed, and a dedicated noise reduction switch.

The Easiest 4-track Ever
Getting great sound for recording is easier than ever with the CR-4. All of the effect and amp models are accessed using two dedicated select knobs. Simply dial in the amp and effect you need and push the effect select switch on your track. Each track has its own trim knob, volume slider, pan knob and effect switch. Just plug into the track you want to record on, press the record select switch and go.

Built-in Amp and Speakers
The CR-4 comes equipped with two speakers in bass reflex enclosures, providing you with a lot of options. You can listen to your recording play back through the speakers. Or, you can plug into any track on the CR-4, select an amp and effect, and use the CR-4 as a 5-Watt practice amp. You can perfect your performance and record it all using one unit! Plus, because the CR-4 records and plays back cassettes at standard speed, you can also use it for listening to pre-recorded cassette tapes. The speakers can be turned off for silent playback while recording.

All the Right Outs
Once you mix down your recording, you can record it to another device using the CR-4?s stereo RCA outputs. Of course, the CR-4 also comes with two headphone outputs so that you can listen to other recorded tracks while your adding another track to the mix. Because there are two outputs, both you and a friend can hear what?s going on and record or mix together.

Power:
  5 Watts(2.5W + 2.5W)
 
  Speakers:
  2 x 8cm
 
  Number of Tracks/Mixer channels:
  4 Tracks/4 Mixers
 
  Number of simultaneous recording tracks:
  4 Tracks
 
  Number of Inputs:
  4 Inputs (1/4" Phone jack)
 
  Number of Outputs:
  2 Outputs (RCA/phono)
 
  Number of Panpots:
  4 (Center click)
 
  Number of Input Trims:
  4 (-50dBv to -10dBv)
 
  Tape speed:
  4.76cm/sec (capable of playing back ordinary stereo music tape)
 
  Type of tape:
  Chrome High-Bias (Type2)
 
  Headphone:
  2 (1/4 inch phone jack)
 
  Control knobs:
  Gain, Bass, Middle, Treble, Volume
 
  Modeling type select knob:
  Guitar x 6 (BTQ CLN/BLK212/AC30TB/UK80'/UK MDN/NU METAL),
Bass x 2 (VALVE/LA STUDIO),
Acoustic guitar x 1 (AC EQ),
Vocal x 2 (VOCAL1/VOCAL2)
 
  Effects select knob:
  11 types (COMP / WAH / CHORUS / FLANGER / PHASER / TREMOLO / ROTARY / DELAY / REVERB / CHO+DL / CHO+RV)

Effect Depth knob

Tap Switch

Noise reduction

Speaker ON/OFF switch

 
  Included accessories:
  AC/DC adapter
 
  Dimensions:
  17.08 (W) x 3.94 (H) x 12.6 (D) in.
434(W) x 100(H) x 320(D)
 
  Weight:
  11 lbs./5Kg
TASCAM's award winning DR-60D is the new audio recording solution for on-set filmmakers and videographers using DSLR's. For years, filmmakersProSound Network Best of Show have been trying different methods for recording audio, using bulky recorders designed for music and trying to transform the inferior audio technology built-into DSLR's. Now TASCAM has designed an answer that pros and amateurs alike have been waiting for. The DR-60D is a brand new 4-track solid-state recorder utilizing TASCAM's decades of experience. The recorder utilizes high-grade HDDA pre-amps, legendary AD converters, and a durable but lightweight structure and shape. This device will fit snuggly under any camera or into any rig, and record up to 96kHz/24-bit high quality audio straight to SD/SDHC media. Filmmakers have at their disposal two 1/4“-XLR Locking Combo MIC/LINE Inputs, 3.5mm Stereo MIC Input, Camera In, Camera Out, Line Out and Headphone Out. Both 1/4“-XLR Combo Inputs supply +48V Phantom Power and the 3.5mm Input supplies Plug-In Power for microphones requiring a bias voltage. The DR-60D is incredibly easy to use, employing TASCAM's very popular user interface and external controls for every major operation. The body structure, soft-touch keys and dials are designed specifically to help eliminate handling noise. The multiple record modes include, 4-Channel Record, Auto Record and TASCAM's Dual Record "Safety Track" Mode make the DR-60D one of the most versatile recorders on the market.
  • Record to SD/SDHC card (Up to 32GB)
  • Simultaneously record up to 4 tracks
  • Record Mode:MONO, STEREO, DUAL MONO, DUAL STEREO, 4-CHANNEL
  • Recording format:44.1/48/96kHz 16/24bit (WAV/BWF)
  • TASCAM original HDDA microphone preamps
  • Recording levels can be adjusted independently for the 1/L, 2/R and 3-4 inputs
  • Two XLR/TRS inputs support +4dBu line level input and phantom power (24 or 48VDC on XLRF)
  • Plug-in power and high-output mic input supported on inputs 3-4
  • CAMERA OUT connector for output from the DR-60D's mixer (adjustable gain)
  • CAMERA IN connector for sound monitoring from the camera
  • Independent adjustable LINE OUT and HEADPHONE jacks for high-quality sound output
  • 50mW/ch headphone output
  • Tripod mounting socket (bottom) and DSLR mounting screw attachment (top)
  • Handles protect the screen and can be used to attach a shoulder strap
  • Soft-Touch Rubber Keys for silent operation
  • HOLD switch to prevent accidental operation
  • QUICK button feature for easy access to various functions
  • 128x64 pixel LCD with backlight
  • USB 2.0 connection for high-speed transferring of files
  • Mini USB cable included
  • Operates on 4-AA batteries, an AC adapter (sold separately) or USB bus power
  • Can extend battery life with BP-6AA battery pack (sold separately)
  • Dedicated remote control jack for the wired RC-10 remote control or RC-3F footswitch (both sold separately)
  • Internal mixer: PAN and LEVEL controls
  • Low cut filter(40/80/120Hz)
  • Limiter (1/L and 2/R can be selected for link-operation)
  • Delay function for microphone distance adjustment (up to 150ms)
  • M-S decode function
  • Slate tone generator (AUTO/MANUAL)
  • Selectable duration of slate tone from four positions (0.5/1/2/3 sec, when auto-generated)
  • Selectable slate tone generation. 3 positions: OFF/HEAD/HEAD+TAIL, when auto-generated
  • File name format can be set to use a user-defined word or date
  • Dual-recording function allows two files to be recorded simultaneously at different levels
  • Auto-record function can automatically start and stop recording at set level
  • Pre-recording function allows the unit to record a 2 second sound buffer before recording is activated
  • Self-timer function for solo recording
  • New file starts recording automatically without interruption when maximum file size is reached
  • Track incrementing function allows a recording to be split by creating a new file when desired
  • Jump back and play function
  • Equalizer function for playback, and level alignment function to enhance the perceived overall sound pressure
  • Resume function to memorize the playback position before the unit is turned off
  • MARK function up to 99 points per audio track
  • DIVIDE function
SPECIFICATIONS
Recording media SD card(64MB to 2GB), SDHC card(4GB to 32GB)
Recording format
WAV 44.1/48/96kHz, 16/24bit
BWF 44.1/48/96kHz, 16/24bit
Number of channels 4channel (stereo x2)
Analog audio input
1/L, 2/R connectors
Connector XLR-3-31 (1:GND, 2:HOT, 3:COLD)/6.3mm(1/4“)TRS standard jack
Set to "MIC / MIC+PHANTOM“
Input impedance 2k ohms
Phantom power 48V +/-4V(10mA/CH) / 24V +/-4V(10mA/CH)
Maximum input level 0dBu
Minimum input level -72dBu
MIC input gain TRIM MAX
LOW +11dB
MID +36dB
HIGH +52dB
Set to "LINE“
Input impedance 10k ohms or more
Standard input level +4dBu
Maximum input level +24dBu
3-4 connector
Connector 3.5mm (1/8“) stereo mini jack (this connector can be supplied plug-in power)
Input impedance 10k ohms
Maximum input level +10dBV
Minimum input level -50dBV
MIC input gain TRIM MAX
LOW +3dB
HIGH +26dB
CAMERA IN connector
Connector 3.5mm (1/8“) stereo mini jack
Input impedance 10k ohms
Standard input level -10dBV
Maximum input level +6dBV
Analog audio output
CAMERA OUT connector
Connector 3.5mm (1/8“) stereo mini jack
Output impedance 200 ohms
Standard output level -50dBV
Maximum output level -30dBV
LINE OUT connector
Connector 3.5mm (1/8“) stereo mini jack
Output impedance 200 ohms
Standard output level -10dBV
Maximum output level +10dBV
PHONES connector
Connector 3.5mm (1/8“) stereo mini jack
Maximum output level 50mW + 50mW
USB
Connector Mini-B type
Format USB2.0 HIGH SPEED mass storage class
REMOTE
Connector 2.5mm TRS jack
Power Four AA batteries(Alkaline or NI-MH), USB bus power, Dedicated AC adapter(TASCAM PS-P515U, sold separately), Dedicated external battery pack(TASCAM BP-6AA, sold separately)
Power consumption 5.4W
Continuous operation time 2ch WAV, 44.1kHz, 16bit rec
DR-60D
Alkaline batteries (EVOLTA) About 2:30 min (Phantom on) About 4:30 min (Phantom off)
NI-MH batteries (eneloop) About 3:15 min (Phantom on) About 5:00 min (Phantom off)
NI-MH batteries (eneloop pro) About 3:45 min (Phantom on) About 6:00 min (Phantom off)
DR-60D+BP-6AA
Alkaline batteries (EVOLTA) About 5:30 min (Phantom on) About 10:30 min (Phantom off)
NI-MH batteries (eneloop) About 7:30 min (Phantom on) About 12:00 min (Phantom off)
NI-MH batteries (eneloop pro) About 9:30 min (Phantom on) About 14:30 min (Phantom off)
Dimensions 133(W)×93.2(H)×78(D)mm (with the top adapter attached)
Weight 510g (not including batteries)
Operating temperature 0˚C to 40˚C
Standard accessories USB cable, warranty card, Owner's manual
Computer compatibility
Windows
OS Windows XP, Windows Vista, Windows 7, Windows 8
CPU Pentium 300MHz or more
RAM 128MB or more
USB recommended: USB2.0
Macintosh
OS Mac OS X Jaguar (V10.2), Mac OS X Panther (V10.3), Mac OS X Tiger (V10.4), Mac OS X Leopard (V10.5), Mac OS X Snow Leopard(V10.6.8), OS X Lion(V10.7), OS X Mountain Lion(V10.8)
CPU Power PC, iMac, G3, G4 266MHz or more
64MB or more
USB recommended: USB2.0
Audio performance
Frequency response 20-20kHz +0.5/-2dB(LINE IN or MIC IN to LINE OUT, Fs44.1k/48kHz, JEITA) 20-40kHz +0.5/-3dB(LINE IN or MIC IN to LINE OUT, Fs96kHz, JEITA)
Distortion 0.02% or less(LINE IN or MIC IN to LINE OUT Fs44.1k/48k/96kHz, JEITA)
S/N ratio 92dB or more(LINE IN or MIC IN to LINE OUT Fs44.1k/48k/96kHz, JEITA)
Equivalent input noise -120dBu or more
Recording duration The table below shows the maximum recording time on SD/SDHC cards of different capacities for different file formats for recording.
File format(recording setting) SD/SDHC card capacity(hours:mintes)
1GB 2GB 4GB 8GB
WAV/BWF 16bit(STEREO) 44.1kHz 1:41 3:22 6:44 13:28
48kHz 1:33 3:06 6:12 12:24
96kHz 0:46 1:33 3:06 6:12
WAV/BWF 24bit(STEREO) 44.1kHz 1:07 2:15 4:30 9:00
48kHz 1:02 2:04 4:08 8:16
96kHz 0:31 1:02 2:04 4:08
  • The recording times shown above are estimates. They might differ depending on the SD/SDHC card in use.
  • The recording times shown above are not continuous recording times, but rather they are the total possible recording times for the SD/SDHC card.
  • If recorded in mono in WAV files, the maximum recording time will be double the figures above.
  • For dual and 4-channel recording in WAV/BWF format, the recording times are about half those shown above.

Tuner + Metronome + Recorder - All in One Unit!
The TMR-50 - Your Ideal Practice Partner

Highlights:

  • Tuner, metronome, and recorder can be used simultaneously or independently.
  • Internal mic and speaker make it easy to record and play back your performance
  • Loop Play function lets you repeat a desired region of a recorded track
  • High-quality linear PCM recording/playback
  • Record up to 100 tracks (approximately total 20 minutes)
  • USB port lets you transfer recorded data and song files between the TMR-50 and your computer
  • Newly designed highly responsive LCD needle-type meter
  • Wide detection range from C1 to C8
  • The Sound Out function produces a reference tone in a three-octave range from the built-in speaker
  • The Sound Back function generates the reference tone that's closest to the input sound, while the meter indicates the pitch discrepancy between the reference and the input sound - a great function for ear training!
  • Calibration supports a range of concert pitches
  • Marks indicate pure major and minor third intervals
  • Wide tempo range of 30--252 beats per minute
  • 15 rhythm variations let you practice with a broad range of musical styles
  • Easy tempo settings with two types of tempo step patterns plus a tap tempo function
  • Large LCD with backlight brightness that's adjustable over two levels for enhanced visibility
  • Your choice of body color: black or pearl white
  • Convenient key layout, and newly designed stand and battery cover
  • Memory Backup and Auto Power Off

Korg's popular TM series of tuner/metronome units is loved by players who practice to perfect their musical skills. Now joining the lineup is the TMR-50, which adds recorder functionality to the already impressive list of features. An extremely valuable way to improve your playing ability is to identify the problem areas that need work, and then practice to improve those areas. With its built-in mic and speaker, the TMR-50 makes it easy to practice this way. It provides high-quality linear PCM recording and a USB port for convenient usage with your computer. The TMR-50 features equally robust capabilities for its tuner and metronome functionality that will help you improve your sense of pitch and rhythm. Two choices of color are available: black and pearl white. Whether you're in a brass band or an orchestra, the TMR-50 is the ideal partner for anyone who wants to improve their playing.

Specifications

Recording format:

PCM audio format, WAV format (extension: .wav) 44.1 kHz@16-bit

Available recording time:

Maximum approx. 20 minutes (Internal Memory size is 120 MB)

Total number of tracks:

Up to 100 tracks

Tuning:

12 note equal temperament

Detection range:

C1 (32.70 Hz) ~ C8 (4186 Hz), Using Sine Wave.

Reference tone:

            C3 (130.81 Hz) ~ C6 (1046.50Hz), 3 Octave.

Tuning Mode:

            Meter Mode (AUTO), Sound Out Mode (MANUAL), Sound Back Mode (AUTO)

Calibration range:

A4 = 410 ~ 480 Hz (1 Hz steps)

Detection accuracy:

+/- 1 cent

Sound precision:

+/-1 cent

Tempo range:

Quarter Note = 30 to 252 BPM

Tempo setting:

3 Types:       Pendulum Step

Full Step

Tap Tempo

Beat range:

            Total 10 beats: "0 to 9" as "Quarter-note" Rhythm

Rhythm pattern:

Duplets, triplets, triplets without the center beat, quadruplets, and quadruplets without the center beats

Tempo accuracy:

±0.3%

Terminals:

            Input (f6.3mm, Mono-Standard Jack type)

            Headphones (f3.5mm, Stereo-mini Jack type)           

            USB (mini-Type B)      

Internal Speaker:

            Dynamic Speaker (f28 mm)                                                             

Power (Battery):

AAA battery (3.0 V) x 2

Manganese batteries or alkaline batteries, Ni-MH: Nickel metal hydride

Battery Life:

Recorder ... Approximately 16/13/11 hours

(Backlight: off/soft/auto, using alkaline batteries. Maximum of 20 minutes per

recording.)

Tuner ... Approximately 24/22/20 hours

(Backlight: off/soft/auto, A4 continuous input, using alkaline batteries)

Metronome ... Approximately 18/16/14 hours

(Backlight: off/soft/auto, tempo 120, 4 beats, maximum volume, using alkaline batteries)

Dimensions (W x D x H):

111 x 82 x 18 mm / 4/37 x 3.23 x 0.71 inches

Weight:

119 g / 4.19 oz (Including battery)

Included items:

AAA battery (3.0 V) x 2 for verifying proper operation

USB Cable

Options:

            Contact Mic = CM-100L

Computer Requirements

Windows:

A computer that satisfies the operating requirements of Microsoft Windows XP/Windows Vista/Windows 7 and is equipped with a USB port

Macintosh:

            Mac OS X 10.5 or later

 

The D-2012C is a 6U rack mountable Remote Console Unit designed for exclusive use with the D-2008SP Digital Mixing Processor Unit. Assigned to any desired channels inside the D-2008SP by the dedicated software, the D-2012C's 12 motorized faders and 8 rotary encoders can remotely adjust their volumes. Desired preset memories can be recalled using 8 function keys. It is equipped with 1 channel line input (stereo), which allows the audio signal to be transmitted to the D-2008SP via monitor bus. Audio signals inside the D-2008SP can be monitored via monitor bus through headphones connected to a stereo headphone output. The D-2012C can be installed on a desk with the additional use of an optional D-2012AS Console Case.

 

Specification
* 0 dB = 0.775 V
Power Source 220 - 240 V AC
Power Consumption 18 W
Volume Adjustment 100 mm motorized fader x 12
Rotary encoder x 8
Line Input 1 channel (stereo)
Headphone Output Stereo 100 mW + 100 mW (32 Ω load)
Monitor Bus 1 stereo input
Connector: RJ45 connector
Connection cable: Shielded twisted pair (STP) Cat 5 or higher LAN cable (2 pairs of data lines)
Maximum cable distance: 100 m (109.36 yd) (between D-2012C and D-2008SP)
LAN Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)
RJ45 connector
Network protocol: TCP/IP
Connection cable: Shielded twisted pair (STP) Cat 5 or higher LAN cable
Maximum cable distance: 100 m (109.36 yd) (between D-2008SP and switching hub)
Control RS-232C: D-sub connector (9 pins) for maintenance use
Finish Panel: Surface-treated steel plate
Rack mounting bracket: Surface-treated steel plate
Dimensions 482 (W) × 266 (H) × 138 (D) mm (18.98 × 10.47" × 5.43)
Weight 6.6 kg (14.55 lb)
Accessory Power cord (2 m (6.5 ft)) ……1
Fader knob (yellow) ……3
Option Console case: D-2012AS

 

The APH-2n optional accessory pack includes seven tools for use with the H2n. The remote control can be used to start, stop and pause recordings as well as to add marks. The other accessories in the pack are a windscreen that reduces wind and breath noise, a mic clip adapter for use with a mic stand, a tabletop tripod with extendable legs, a padded-shell case, an AC adapter and a USB cable.

Specifications:
  • Recording media: SD card(64MB to 2GB), SDHC card(4GB to 32GB), SDXC card(48GB to 128GB)
  • Recording format
•    WAV: 44.1k / 48k / 96k Hz, 16bit / 24bit •    BWF: 44.1k / 48k / 96k Hz, 16bit / 24bit
  • Number of channels: 4-channel (stereo × 2, mono × 4)
  • Analog audio input
•    Connector: XLR-3-31 (1:GND, 2:HOT, 3:COLD) / 6.3mm(1/4“)TRS standard jack Set to "MIC / MIC+PHANTOM“ •    Input impedance: 2k ohms •    Phantom power: 48V +/-4V(10mA/CH), 24V +/-4V(10mA/CH) •    Maximum input level: 0dBu •    Minimum input level: -72dBu •    MIC input gain: TRIM MAX •    LOW: +11dB •    HIGH: +51dB •    HI + PLUS:  +63dB
  • Set to "LINE“
•    Input impedance: 10k ohms or more •    Standard input level: +4dBu •    Maximum input level: +20dBu
  • 1/2 connector
•    Connector: 3.5mm(1/8“)stereo mini jack  (this connector can be supplied plug-in power) •    Input impedance: 10k ohms •    Maximum input level: +10dBV •    Minimum input level: -50dBV •    MIC input gain: TRIM MAX •    LOW: +3dB •    HIGH: +26dB •    HI + PLUS: +38dB
  • CAMERA IN connector
•    Connector: 3.5mm(1/8“)stereo mini jack •    Input impedance: 10k ohms •    Standard input level: -10dBV •    Maximum input level: +6dBV Analog audio output
  • LINE OUT connector
•    Connector: 3.5mm(1/8“)stereo mini jack •    Output impedance: 200 ohms •    Standard output level: -10dBV •    Maximum output level: +6dBV
  • CAMERA OUT connector
•    Connector: 3.5mm(1/8“)stereo mini jack •    Output impedance: 200 ohms •    Standard output level: -40dBV •    Maximum output level: -24dBV
  • PHONES connector
•    Connector: 3.5mm(1/8“)stereo mini jack •    Maximum output level: 20mW + 20mW USB •    Connector: Micro-B type •    Format: USB2.0 HIGH SPEED mass storage class
  • REMOTE Connector: 2.5mm TRS jack
  • Power: 4 AA batteries(Alkaline or NI-MH), USB bus power, Dedicated AC adapter(TASCAM PS-P515U, sold separately), Dedicated external battery pack(TASCAM BP-6AA, sold separately)
  • Power consumption: 5.0W
  • Continuous operation time: 2ch WAV, 44.1kHz, 16bit rec, Phantom power not used
  • Dimensions: 169(W)×55.2(H)×106.5(D)mm (with the top adapter attached)
  • Weight: 625g ( including batteries) / 530g (without batteries )
Weight5.00 kg1.00 kg0.30 kg6.60 kg4.00 kg0.60 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 5.00 kg
Weight 1.00 kg
Weight 0.30 kg
Weight 6.60 kg
Weight 4.00 kg
Weight 0.60 kg