| Content |
400W of ultra-efficient Fast Recovery™ amplification
• LF 300W peak power (Class-D)
• HF 100W peak power (Class A/B)
•
High-output transducers
• 15" high-precision woofer
• 1” compression driver
•
Mackie Active electronics provide total system optimization
• Precision 2-way crossover
• Transducer time-alignment
•
User-adjustable 3-band contour EQ with sweepable mid-frequency
•
Mic/Line input for direct connection of single microphone
•
Tough, impact-resistant polypropylene enclosure
•
Pole-mountable and floor wedge-able
•
Extremely lightweight and portable
• TH-15A (36 lbs)
|
|
The Titan™ 15 Active is a self-powered, two-way professional loudspeaker system incorporating a high grade Bi-Amp Class D and Class A/B Amplifiers. The model also has intelligent electronics, such as full protection system: DC, overload, short circuit, thermal, On / Off mute and LF / HF Limiters, which protects the system from overload and allows reliable operation right up to the power limit.
The bottom of the Titan™ 15 ACTIVE provides a convenient built in pole mount socket for easy mounting on a standard 35mm diameter speaker stand pole.
The speaker stand receptacle features a locking screw to ensure stability.
Ten M8 threaded rigging points are provided for a variety of safe flying
configurations with four of these inserts available, bottom-mounted, in an OmniMount® 60.0 bracket footprint.
Mixer and Controls
The Titan™ 15 ACTIVE provides basic mixing functions with a variety of input options. Two inputs with separate level controls and a common equalization section allow for overall balance and tonal characteristic control. Easy interfacing to external mixers and processors provide for easy expansion to larger, more sophisticated systems.
| |
SPECIFICATIONS
| | MODEL | TITAN 15 ACTIVE | | GENERAL INFO |
| | System type | Active 15" 2-way Bi-Amplified | | Frequency response +/- 3db | 50-20kHz | | HF SECTION |
| | Hf type | Titanium Compression Driver | | Horn dispersion (H x V) | 90° x 60° | | Hf exit size mm / inches | 25mm / 1“ | | PHYSICAL FEATURES |
| | Enclosure Material | Injection Moulded Polypropylene | | Enclosure Colour | Grey or White or Black | | Size (mm/inches) | 381mm / 15“ | | IN / OUT PANEL (speaker Level) |
| | Input connector | XLR - 1/ 4" Combo jack | | AMPLIFIER POWER |
| | Power On Protection | Power switch on / off mute | | Thermal Protection | Amplifier shutdown, auto reset | | Low Line Voltage Shut Down | 60% Nominal line voltage | | Driver Protection | Independent LF and HF limiters | | DC Protection | Yes | | Short Protection | Yes | | Controls | High (±10dB) 10kHz Shelving | | Dimensions (HxWxD) |
| | mm | 708.3mm x 477.8mm x 401.77mm | | inches | 27.9" x 18.8" x 15.8“ | | Microphone / Transmitter |
| | Maximum Input Level | +22dBu | | Impedance | 4 Ω | | MIXER MODEL |
| | INPUT IMPEDANCE | Balanced: 20k ohms Unbalanced: 10k ohms | | Clip Limiter | Turns on approx 350W output | | Limiter Indicator | Red LED | | Power Indicator | Red LED | | AC Power details |
| | Power Supply | High Efficiency Switching Mode Power Supply | | AC Power Options | AC100~120V / 220~240V, 50 / 60Hz | | Power On Indicator | LED | | Rigging / Bracket / | 10 M8 threaded inserts including 4 | | Mounting Options | M8 threaded inserts on bottom in OmniMount 60.0-type footprint Pole-mount receptacle with lock screw 2 carry handles (one on each side) Optional wall-mount bracket | | Impedance Balanced | Balanced: 1k ohm - Unbalanced: 500 ohm | | Line Output |
| | Line Output Connector | Switchable LOOP / MIX Balanced Male XLR | | Input A - type | Switchable balanced mic or line level input | | Input Sensitivity | Mic: -36dBu (-38.2dBv or 12.28mVrms)
Line: +4dBu (1.78dBv or 1.228Vrms) | | Maximum Input Level | +22dBu | | Input Connector | XLR - 1/ 4" Combo jack | | Input Impedance | Balanced: 20k ohms Unbalanced: 10k ohms | | Input B - type | Line level input | | Input Sensitivity | XLR - 1/4" Combo jack: 1.78dBv or 1.228Vrms
RCA: 0dBu (-2.2dBv or 0.775Vrms) | | Maximum Input Level | +22dBu | | Input Connectors | Combo jack: 1/4" - XLR / Summed dual RCA jacks | | Bass Response Optimizer |
| | (“BRO“™) circuit | +5dB at 60Hz | | Subsonic Filter | 30Hz, Second-order filter | | Amplifiers |
| | Low-Frequency (Class D) | Rated 350W RMS, 700W Peak | | High- Frequency (Class A/B) | Rated 70W RMS, 140W Peak | | Electronic Crossover | 24dB/octave Linkwitz-Riley | | Crossover Frequency | 1.8kHz | | Controls | High (±10dB) 10kHz Shelving | | Equalization | Low (±10dB) 100Hz Shelving | | DIMENSIONS & WEIGHT |
| | Net weight ( kg / lbs ) | 23.7kg / 52.67lbs | | Gross weight ( kg / lbs ) | 26.94kg / 59.27lbs | |
|
Features
- Compact full-range system
– Ultra lightweight 3rd generation Class D amplifier
– Switch-mode power supply
– Reduced size and weight
– Pole mount socket
– Rigging points
The Avant series incorporates an impressive battery of high tech features that take powered portable systems to a new level of performance. The latest in Class D power amplification, digital signal processing and optimized D.A.S. components have been combined with enclosures designed for ease of transportation and road worthiness.
The 600 W Class D amplifier provides extended bandwith, improved dynamic range and exceptionally low distortion. This makes the Avant series one of the best sounding systems on the market. After all, isn´t quality sound what it´s all about?
The Digital Signal Processsing (DSP) incorporated in the Avant series provides unparalleled control over the audio signal. Critical parameters have been fine tuned for each cabinet, yet their consistent sound "signature" allows them to perform seamlessly with other systems from the Avant family.
The 15AV4 loudspeaker designed and built by D.A.S. provides powerful low frequency reproduction. High frequencies are handled by the M-50N compression driver which uses a neodymium magnet structure and 2" titanium diaphragm for exceptional perormance in all types of applications.
Technical Data
| Nominal LF Amplifier Power | 500 W | | Nominal HF Amplifier Power | 100 W | | Frequency Range (-10 dB) | 45 Hz-20 kHz (EQ Flat) | | Rated Peak SPL at 1 m | 133 dB | | Dispersion | 80ºH x 50ºV rotatable horn | | Enclosure Material | Plywood | | Color/Finish | Black/Paint | | Connectors | Input: Female XLR-Jack combo
Loop Thru: XLR
AC Input Male IEC | | AC Requirements | 115 V, 50/60 Hz
230 V, 50/60 Hz | | Current Draw (1/3 power @ 230 V) | 1.7 A | | Dimensions (H x W x D) | 83 x 44.8 x 47.6 cm
32.7 x 17.6 x 18.7 in | | Weight | 30 kg (66 lb) |
| Features:
EVS-18K 18-inch Woofer
123 dB max. SPL
400 W Class-D Amplifier
Integrated DSP
Cabinet
Powered subwoofer 1 x 18“, vented design
Maximum Amplifier Output Capability, IHF-A
400 W
Amplifier Power RMS
305 W
Max. SPL 1m / calc.
123 dB
Frequency Range (-10 dB)
40 Hz to 130 Hz
Nominal Coverage Angle
Omnidirectional
Audio Input
XLR and 1/4" TRS combination
Audio Output (LINK OUTPUT)
XLR, balanced
Digital Signal Processing
28/56-Bit, 48 kHz
Crossover Frequency
100 Hz
Product Dimensions (W x H x D)
661 x 507 x 574 mm
Net Weight
31.3 kg
Optional Accessories
---
SH-118A, Dust Cover
F01U270397
User's Manual |
The new ETX Powered Loudspeakers family builds upon the industry-leading innovation and 85-year heritage of Electro-Voice audio engineering to offer the most advanced professional portable powered loudspeakers available today.
A versatile high-end choice for live entertainment venues, rental companies, pro musicians and DJs, and installed sound, the ETX Powered Loudspeakers family features three two-way models (10-inch, 12-inch and 15-inch, all with a precision HF titanium compression driver), a three-way model (15-inch with a 6.5-inch MF driver and a precision HF titanium compression driver) and two subs (15-inch and 18-inch drivers).
Positioned above the ZLX and Live X families respectively, ETX Powered Loudspeakers complete a trio of recent EV portable loudspeaker offerings-each of which was designed to bring best-in-class performance to its price point.
Inside each low-profile, tour-grade wood enclosure are a host of unique new features that set ETX Powered Loudspeakers apart, combining intelligent technology and innovative industrial design for spectacular results across all applications. EV-engineered high-efficiency transducers and high-powered Class-D amplifiers, Signal Synchronized Transducers (SST) waveguide design and smart FIR-Drive DSP all work together to provide peerless EV sound quality and precise coverage at the highest SPLs.
- 15-inch LF SMX woofer
- 1.25-inch HF titanium compression driver
- 2000 W Class-D power amplifier with integrated FIR-Drive DSP
- 135 dB peak SPL
| Frequency Range | 40 Hz - 20 kHz | | Maximum SPL | 135 dB peak dB | | Power Consumption | 100 - 240 V~, 50 - 60 Hz, 1.6 - 0.8 A | | Power Rating | 2000 W | | Frequency Response | 48 Hz - 20 kHz | | Coverage (Nominal -6 dB) H | 90 ° | | Coverage (Nominal -6 dB) V | 60 ° | | LF Transducer | SMX2150 380 mm (15 in) | | HF Transducer | DH3-B 1.25-in titanium compression driver | | Crossover Frequency | 1500 Hz | | Connector Type | (2) XLR/TRS combo jack and (1) XLR link output | | Enclosure Material | 18-mm, 13-ply birch plywood with EVCoat | | Grill | 16AWG steel with powdercoat | | Suspension | (8) M10 suspension points | | Height | 691 mm (27.2“) | | Width | 431 mm (16.97“) | | Depth | 447 mm (17.6“) | | Weight Net | 27.7 kg (61.07 lbs) | | Shipping Weight | 31.5 kg (69.45 lbs) |
|
Features:
DH-1K 1.5-inch Titanium Diaphragm Compression Driver
EVS-15K 15-inch Woofer
124 dB max. SPL
500 W Class-D Amplifier
Integrated DSP with FIR filter
Cabinet
Powered two-way full-range speaker, 15" woofer, 1.5" compression driver, vented design
Maximum Amplifier Output Capability, IHF-A
500 W
Amplifier Power RMS
420 W
Max. SPL 1m / calc.
124 dB
Frequency Range (-10 dB)
50 Hz to 17 kHz
Nominal Coverage Angle
90° x 50° (Horizontal x Vertical)
Audio Input (LINE 1 or MIC/LINE 2)
XLR and 1/4" TRS combination
Audio Input (AUX)
Stereo RCA, unbalanced
Audio Output (LINK OUTPUT)
XLR, balanced
Digital Signal Processing
28/56-Bit, 48 kHz
Crossover Frequency
1.7 kHz
Product Dimensions (W x H x D)
708 x 432 x 382 mm
Net Weight
22.5 kg
Optional Accessories
---
SH-115A, Dust Cover
F01U270396
VPM 1500, variable speaker pole
F01U141047
BS 35, speaker stand
F01U141046 |
Reviews
There are no reviews yet.