| Content |
Mackie C200 200W Rms-8Ω Passive 2-way Loudspeaker
Looking for renowned Mackie sound quality in a portable, lightweight package? Want to instantly upgrade the sound of your existing powered mixer or amplifier without breaking the bank? Our C200 2-Way Portable Passive Loudspeakers put the superior clarity, wide dispersion, and legendary ergonomics of the SRM Series within reach of any serious musician, DJ, or small club. These compact-yet-loud speakers can be pole-mounted for use as a small full-range PA system, combined with subwoofers as needed, and even employed as high-quality passive floor monitors.
Features:
Portable Precision Passive loudspeaker with high-precision 1.4" HF titanium compression driver and 10" LF transducer
Wide, even dispersion pattern means everyone in the audience hears great sound
Asymmetrical cabinet design for best acoustical response
Integrated low-impedance compensated crossover and transducer protection
Tough, impact-resistant enclosure with sturdy handles, pole-mount, and integrated rigging points
500W peak power handling at 8 ohms
Three setup configurations: pole mount, flyable and wedge
Passive version of the best-selling SRM350
ACOUSTIC PERFORMANCE
SYSTEM SPECIFICATIONS::
- Frequency Response (–3 dB): 89Hz – 20kHz
- Frequency Range (–10 dB): 59Hz – 22kHz
- Maximum SPL Long-term @ 1m: 118dB
- Crossover Frequency: 1800Hz
- Input Type: Speakon®-style 1/4-inch TS phone jack
- Input Impedance: 8 ohms
- Power Handling: (RMS) 200 watts, (Peak) 500 watts
- Portable Precision Passive loudspeaker with high-precision 1.4" HF titanium compression driver and 10" LF transducer
- Wide, even dispersion pattern means everyone in the audience hears great sound
- Asymmetrical cabinet design for best acoustical response
- Integrated low-impedance compensated crossover and transducer protection
- Tough, impact-resistant enclosure with sturdy handles, pole-mount, and integrated rigging points
- 500W peak power handling at 8 ohms
- Three setup configurations: pole mount, flyable and wedge
- Lightweight 11,8kg
|
Made for permanent sound placement.
The Mackie iP-10 10″ Installation Loudspeaker is designed exclusively for a wide range of installed sound reinforcement applications. Behind iP-10's clean, professional look are a high-output, custom-designed 10″ woofer and premium 1.4″ titanium diaphragm compression driver delivering rich, articulate full-bandwidth response. Ample rigging points support vertical and horizontal rigging and a choice of Neutrik or terminal connections provides install flexibility. Optional ceiling and wall mounts are available for aesthetically demanding venues. Plus, the companion iP-18S 18″ subwoofer is perfect for additional low-frequency response and output in larger applications.
FEATURES
10″ 2-way low-profile installation loudspeaker
10″ high-output ceramic woofer with 2″ voice coil for maximum output
1.4″ titanium compression driver provides smooth, consistent high-frequency response
8 x M10 rigging points and rotatable 90° x 50° horn for vertical/horizontal rigging
Rotatable center logo allows for clean presentation in all configurations
Convenient terminal strip connectivity saves time and cost
Dual Neutrik parallel connectors
Lightweight, compact and durable 15mm poplar cabinet construction
SPECIFICATIONS
iP-10 10" 2-Way Passive Loudspeaker
Frequency range (-10 dB): 50 Hz - 20 kHz
Coverage pattern: 90° x 50°
Power handling: 200 watts continuous / 400 watts program
Max SPL: 124 dB
Crossover frequency: 3 kHz
Nominal impedance: 8Ω
Height: 20.5 in / 520 mm
Width (Front): 12 in / 310 mm
Width (Rear): 6.8 in / 172 mm
Depth: 13.4 in / 340 mm
Product weight: 26 lb. / 11.8 kg |
The V10 is a compact, full range, extremely versatile two-way loudspeaker system. It offers substantial power and efficiency for a variety of professional applications that include portable systems, sound reinforcement, permanent installations and supplementary fill for larger systems. The high-frequency section is a constant directivity CMD horn mathematically designed for Coverage Matching Design in relation to the woofer system, loaded on a neodymium compression driver with a 2.5” diaphragm assembly for smooth, controlled dispersion. The low-frequency transducer is a tight, high power 10” mid-bass with a 2.5 ” voice coil
APPLICATIONS
- • Live performance
- • DJ set
- • Rental solutions
- • Permanent installations
General Specs
10" high power, 2.5" voice coil mid bass
1 x 2.5" high power titanium neo compression driver
130 dB max SPL
350 Watt AES
High output, response down to 55 Hz
Birch plywood cabinet
Weather resistant, textured, polyurea finish
Epoxy powder coated front grille
TRANSDUCERS
- Compression Driver:0“, 1.7" Voice coil
- Nominal Impedance:8Ω
- Input Power Rating:100 W PEAK, 50 WW AES
- Sensitivity:108dB
- Woofer:6“, 1.8" voice coil
- Nominal Impedance:8Ω
- Input Power Rating:300 W PEAK, 150 WW AES
- Sensitivity:94dB
TRANSDUCERS
- Compression Driver:4“, 2.5" Voice coil
- Nominal Impedance:8Ω
- Input Power Rating:180 W PEAK 90 WW AES
- Sensitivity:98dB
- Woofer:10“, 2.5" voice coil
- Nominal Impedance:8Ω
- Input Power Rating:500 W PEAK, 250 WW AES
- Sensitivity:110dB
Acoustical Specs
Frequency Response -10 dB:55 Hz ÷ 20000 Hz
Max SPL @ 1m:130 dB
Horizontal coverage angle:90°
Vertical coverage angle:60°
Directivity index; Q:10
System Sensitivity:94 dB
Nominal Impedance:8 Ω
Power Handling:350 W
Peak Power Handling:1400 W
Recommended Amplifier:700 W
Protections:Dynamic
Crossover frequencies:1000 Hz
Cabinet Specs
Cabinet Material:15mm Birch Plywood
Hardware:Pole mount, 13 x M10
Pole Mount/Cap:yes
Grille:Custom perforated steel grille
Colour:black
Size/Weight
Height: 540 / 21.25 mm/inch
Width:340 / 13.38 mm/inch
Depth:333 / 13.11 mm/inch
Net Weight:15 / 33.06 kg/lbs |
- Passive 2-way bass-reflex installation speaker
- 200 W permanent load capacity
- 118 dB maximum sound-level pressure
- 10" custom woofer and 1" Celestion high-frequency driver
- Rotating CD horn with 80° x 60° dispersion
- For vertical or horizontal use
- speakON-compatible and terminal block input
- 4 x M8 mounting holes
- Shock-resistant front grille for optimum speaker protection
- Extensive range of smart accessories for installation
- Available in black or white
With its streamlined and compact design, the LD Systems SAT 102 G2 is excellently suited for permanent installation and discreet integration into virtually any setting. It features a 10" custom woofer and a 1" compression driver from Celestion, connected to a rotating CD horn with 80° x 60° dispersion. This makes the passive 2-way speaker ideal for both vertical and horizontal use.
The SAT 102 G2 attains a maximum sound-level pressure of 118 dB over a frequency response curve of 65–19 kHz with a permanent load capacity of 200 watts. The reflex casing made of 15 mm MDF has four M8 mounting holes. The inputs are a speakON-compatible socket and a terminal block, while an additional terminal block serves as an output for convenient parallel connection.
Special wall holders are available as an accessory to facilitate wall mounting. The SAT 102 G2 is available in black (Art. No. LDSAT262G2) or white textured finish (Art. No. LDSAT262G2W).
Product type
Installation Loudspeakers
Type
Wall-mounted Loudspeaker
Low/mid driver dimensions
10 "
Woofer size
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil (mm)
50.8 mm
Horn
CD horn
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
Celestion
HF driver voice coil
1 "
HF Driver Voice Coil
25.4 mm
Dispersion (H x V)
80 x 60 °
Load rating (RMS)
200 W
Peak power
400 W
Frequency response
65 - 19000 Hz
SPL (1W/1m)
95 dB
Max. SPL
118 dB
Impedance
8 Ohm(s)
Protection circuits
HF Driver
Loudspeaker inputs
2
Speaker input connections
Speakon compatible , terminal block
Loudspeaker outputs
1
Speaker output connections
terminal block
Cabinet material
15 mm MDF
Cabinet surface
texture paint
Cabinet colour
Black
Cabinet construction
vented
Width
300 mm
Height
550 mm
Depth
270 mm
Weight
12,2 kg |
Because the TOA T-650 speaker employs a horn for short distance coverage and a horn for long distance coverage, it ensures high intelligibility even in sports facilities or public halls where many reverberations are generated. The speaker is designed to be installed as a main speaker in small and intermediate indoor sports facilities, and its heavy-duty construction protects unit against impacts from balls and other objects.
| Enclosure | Bass reflex type | | Power Handling Capacity | Continuous pink noise: 120 W, Continuous program: 360 W | | Rated Impedance | 8 Ω | | Sound Pressure Level | 100 dB (1 W, 1 m) | | Frequency Response | 80 - 20,000 Hz | | Crossover Frequency | 1.2 kHz (passive network) | | Speaker Component | Low frequency: 25 cm cone speaker × 2
High frequency: (for long-distance use) CD horn fitted with compression driver
(60 horizontal × 30 vertical)
(for short-distance use) CD horn fitted with compression driver
(90 horizontal × 40 vertical) | | Input Terminal | 2-pole M5 screw terminal, distance between barriers: 12.2 mm | | Finish | Enclosure: Coniferous plywood, black, semi-mat, urethane paint
Grille: Steel plate, black, semi-mat, acryl paint
Mounting bracket: Steel plate t3.2, black, semi-mat, acryl paint | | Dimensions | 288 (W) × 827 (H) × 354 (D) mm | | Weight | 22 kg (including mounting brackets) | | Accessories | Speaker mounting bracket A,B ……1, Speaker mounting bolt ……8, Eyebolt ……1 | | Option | Matching transformer: MT-S0601 |
| Full Range Speaker
- Equipped with: 10" + 1“
- Dispersion: 90° x 60° CD horn
- Power: 300 W RMS
- Impedance: 8 Ohm
- Frequency range: 95 - 19,000 Hz
- Max. SPL: 126 dB
- Flange mount
- 3 x M8 fly points
- 2 Handles
- Connectors: 2 x speaker twist
- Dimensions: 320 x 480 x 290 mm
- Weight: 12.9 kg
|
Reviews
There are no reviews yet.