Mackie IP 10 Passive Speaker 200W RMS 10″ woofer

 Made for permanent sound placement.

The Mackie iP-10 10″ Installation Loudspeaker is designed exclusively for a wide range of installed sound reinforcement applications. Behind iP-10's clean, professional look are a high-output, custom-designed 10″ woofer and premium 1.4″ titanium diaphragm compression driver delivering rich, articulate full-bandwidth response. Ample rigging points support vertical and horizontal rigging and a choice of Neutrik or terminal connections provides install flexibility. Optional ceiling and wall mounts are available for aesthetically demanding venues. Plus, the companion iP-18S 18″ subwoofer is perfect for additional low-frequency response and output in larger applications.
FEATURES

    10″ 2-way low-profile installation loudspeaker
    10″ high-output ceramic woofer with 2″ voice coil for maximum output
    1.4″ titanium compression driver provides smooth, consistent high-frequency response
    8 x M10 rigging points and rotatable 90° x 50° horn for vertical/horizontal rigging
    Rotatable center logo allows for clean presentation in all configurations
    Convenient terminal strip connectivity saves time and cost
    Dual Neutrik parallel connectors
    Lightweight, compact and durable 15mm poplar cabinet construction


SPECIFICATIONS

iP-10 10" 2-Way Passive Loudspeaker

    Frequency range (-10 dB): 50 Hz - 20 kHz
    Coverage pattern: 90° x 50°
    Power handling: 200 watts continuous / 400 watts program
    Max SPL: 124 dB
    Crossover frequency: 3 kHz
    Nominal impedance: 8Ω
    Height: 20.5 in / 520 mm
    Width (Front): 12 in / 310 mm
    Width (Rear): 6.8 in / 172 mm
    Depth: 13.4 in / 340 mm
    Product weight: 26 lb. / 11.8 kg

Specifications

Technical data

Speaker Type    2-Way Passive Speaker
Acoustical data

Nominal Power Rating    300 W/RMS
Program Power Rating    600 W/RMS
Peak Power Rating    900 W/RMS
Impedance    8 Ohms
Sensitivity 1W@1m    96 dB
Frequency Response [-10dB]    70 - 20.000 Hz
Frequency Response [+/- 3dB]    90 - 19.000 Hz
Max SPL    127 dB
HF    1 "
Type HF  Compression Driver
Voice Coil HF    1.5 "
Driver Protection    PTC
Directivity    90X70 °
Horn    CD Horn Aluminium
Rotatable Horn    Yes
Crossover Frequency (passive)    1800 Hz
Slope MF-HF    18 dB/Octave
LF    10 "
Voice Coil LF    2 "
Input Section

Signal Input    1x Speakon
Pin 1+=+
Pin 1-=-
Signal Output    1x Speakon
Pin 1+=+
Pin 1-=-
Mechanics

Housing    Multiplex birch plywood
Housing Design    Multifunctional
Color    Black
Surface Texture    Textured acrylic lacquer
Handles    1x on back
Pole Mount    36mm
Angles Up    Monitore use 45 °
Front Grille    1.5 mm metall grille with acoustic foam in back
Rigging Points    12 x M8
Width    320 mm (12.8 in)
Height    508 mm (20.32 in)
Depth    320 mm (12.8 in)
Weight    14.2 kg (31.31 lbs)
Downloads
Accessory
Systems / Components

The V10 is a compact, full range, extremely versatile two-way loudspeaker system. It offers substantial power and efficiency for a variety of professional applications that include portable systems, sound reinforcement, permanent installations and supplementary fill for larger systems. The high-frequency section is a constant directivity CMD horn mathematically designed for Coverage Matching Design in relation to the woofer system, loaded on a neodymium compression driver with a 2.5” diaphragm assembly for smooth, controlled dispersion. The low-frequency transducer is a tight, high power 10” mid-bass with a 2.5 ” voice coil

• • Live performance
• • DJ set
• • Rental solutions
• • Permanent installations

General Specs

10" high power, 2.5" voice coil mid bass
1 x 2.5" high power titanium neo compression driver
130 dB max SPL
350 Watt AES
High output, response down to 55 Hz
Birch plywood cabinet
Weather resistant, textured, polyurea finish
Epoxy powder coated front grille

TRANSDUCERS

• Compression Driver:0“, 1.7" Voice coil
• Nominal Impedance:8Ω
• Input Power Rating:100 W PEAK, 50 WW AES
• Sensitivity:108dB
• Woofer:6“, 1.8" voice coil
• Nominal Impedance:8Ω
• Input Power Rating:300 W PEAK, 150 WW AES
• Sensitivity:94dB

TRANSDUCERS

• Compression Driver:4“, 2.5" Voice coil
• Nominal Impedance:8Ω
• Input Power Rating:180 W PEAK 90 WW AES
• Sensitivity:98dB
• Woofer:10“, 2.5" voice coil
• Nominal Impedance:8Ω
• Input Power Rating:500 W PEAK, 250 WW AES
• Sensitivity:110dB

Acoustical Specs

Frequency Response -10 dB:55 Hz ÷ 20000 Hz
Max SPL @ 1m:130 dB
Horizontal coverage angle:90°
Vertical coverage angle:60°
Directivity index; Q:10
System Sensitivity:94 dB
Nominal Impedance:8 Ω
Power Handling:350 W
Peak Power Handling:1400 W
Recommended Amplifier:700 W
Protections:Dynamic
Crossover frequencies:1000 Hz

Cabinet Specs

Cabinet Material:15mm Birch Plywood
Hardware:Pole mount, 13 x M10
Pole Mount/Cap:yes
Grille:Custom perforated steel grille
Colour:black

Size/Weight

Height: 540 / 21.25 mm/inch
Width:340 / 13.38 mm/inch
Depth:333 / 13.11 mm/inch
Net Weight:15 / 33.06 kg/lbs

Features

    Hard-suspension bass with Kapton spool
    High-range horn with thermal overload protection
    Integrated high-quality frequency cross-over (not for RSP-18 S)
    Sound characteristics geared especially to heavy-bass sounds like hip hop, techno, house & breaks
    High-performance reserves
    Extremely durable, road-compatible carpeting
    Protective metal corners
    Large carrying shells made of metal
    Sunk-in metal flange for tripods (not RSP-12 M and RSP-30)
    Robust front grid
    Connections via PA pro speaker cable and 6.3 mm jack


Technical Data

    100 watt RMS PA-speaker
    Max. capacity: 200 watt
    Type: 2-way system
    Frequency range: 45 Hz - 20 kHz
    Acoustic pressure: 97 dB
    Speaker: 25 cm (10“) woofer, mid-range and tweeter
    Impedance: 8 ohm
    Dimensions: 530 x 375 x 340 mm
    Weight: 11.5 kg

The CBR10 is the most compact model in its series. While delivering astonishing power for its size and weight, the CBR10 is ideal for both portable and installed applications.

The C3110 is a full range extremely versatile wide-dispersion, low profile, two-way loudspeaker system for near field applications.

Its compact size makes it ideal for low visibility side wall mounting.The high-frequency section is a constant directivity horn loaded to a 1” Neodymium  compression driver with a 1.5” diaphragm assembly for smooth, wide dispersion.
The low-frequency transducer is a 10” woofer with a 2” voice coil.