MACKIE S 525 2×15″ 2-Way Passive Loudspeaker 600W

Loudspeakers are the voice of any PA and Mackie S500 Series Passive Loudspeakers provide the professional power and performance you want for your system.  Delivering class-leading power, S500 full-range loudspeakers are available from a highly-portable 2-way 12″ all the way up to a dual 15″ model that can handle up to 2400 watts of peak power. The sound quality is undeniably professional as S500 loudspeakers utilize high-quality components like custom-specified drivers and all-wood enclosures to deliver touring-quality sound in designs that are rugged and affordable. After all, there's no reason you should sacrifice sound quality for just a few bucks.  With a chest-pounding subwoofer and a selection of full-range models, S500 Series Passive Loudspeakers easily outperform anything in their class.

Specifications:

Transducers

Physical

• Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55
• Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing
• Stainless steel bracket
• 15" high-output LF transducer with 2" voice coil
• RCF Precision Neo 1" Compression Driver with 1.5" voice coil
• 90° x 60° constant directivity horn
• 10° X 20° enclosure sides for array configurations
• Active Mosfet Compression Driver Protection
• 12 brass suspension points (M10)
• Line transformer

• Frequency Response -10 dB: 75 Hz ÷ 20 kHz
• Max SPL @ 1m: 129 dB
• Horizontal coverage angle: 90°
• Vertical coverage angle: 60°
• Directivity index; Q: 13.3
• System Sensitivity: 98 dB
• Nominal Impedance: 16 Ω
• Power Handling: 300 W
• Peak Power Handling: 1200 W
• Protections: dinamyc
• Crossover frequencies: 1300 Hz

• Compression Driver: 1" HF driver, 1.5" voice coil
• Nominal Impedance: 8 Ω
• Input Power Rating: 25 W AES
• Sensitivity: 108 dB
• Woofer: 15" woofer, 2.5" voice coil
• Nominal Impedance: 16 Ω
• Input Power Rating: 250 W AES
• Sensitivity: 98 dB

• Input connector: 4-adriges Neopren Kabel, 5m
• Constant voltage transformer: 70/100 V
• Power Selection: 70V/60W, 30W , 100V/120W, 60W

• Cabinet Material: Polyethylene rotomoulded
• Hardware: 12 x M10 inserts+ U-brackets and pair of spacers
• Grille: Custom perforated aluminium grillewith open-cell fiber and water repellent woven fabric backing
• Colour: grey

• Height: 463 / 18.22 mm/inch
• Width: 463 / 18.22 mm/inch
• Depth: 433 / 17.04 mm/inch
• Net Weight: 19.4 / 42.76 kg/lbs

The Zx5 is a 15-inch, 2-way cabinet with the most elegant high-impact composite enclosure, featuring the newest generation of EV components: the all-new DXV3150, 500W, 15-inch woofer and the all-new 2-inch neodymium ND2 compression driver. The Zx5 is rated for 600 watts long-term power handling and is able of producing high SPLs whilst providing a very smooth frequency response. With two available coverage patterns (60-degrees x 60-degrees or 90-degrees x 50-degrees), two adjustable monitor angles (45- or 55-degrees) and ten built-in rigging and suspension points allowing for a variety of mounting accessories, the Zx5 fits a variety of applications: installations of individual speakers or clusters in entertainment, cultural or religious venues, as well as on stages with bands, musicians and P.A. rental companies. Specifications Frequency Response (-3dB) 52 - 16000 Hz Recommended High-Pass Frequency 36 Hz Sensitivity 1W/1m 98 dB Max. SPL / 1m (calc); full space 132 dB Coverage (nominal -6dB) H° 60 ° Coverage (nominal -6dB) V° 60 ° System Power Handling (continuous/program/peak) 600/1200/2400 Watts Crossover Frequency 1500 Hz Nominal Impedance (Passive) 8 Ohms Minimum Impedance 6.5 Ohms Input Connections Four-pin Speakon (2) Chassis Size 15 inches Weight Net 22.5 kg ( 49.6 lbs ) Dimensions (HxWxD) 692 x 446 x 411 mm (27.24" x 17.56" x 16.18

The passive dB500 has many of the same features as the dB500a, including the same rugged enclosure, and advanced drivers. A natural sounding fixed crossover is built-in, and the back panel features 1/4" and Speakon connectors.

The dB500 speaker cabinet features an array of mounting options. Designed with floor monitoring in mind, they are also easily stacked or permanently installed. A 1 3/8" pole receptacle is built in, and 10 reinforced fly points are available.

    * 90° x 50° Coverage, rotatable for use in either vertical or horizontal orientation.

    * CMCD™ Cone Midrange Compression Driver™ provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.

    * PT™ Progressive Transition™ Waveguide for excellent pattern control with low distortion.

    * Bi-Amp/Tri-Amp Switchable

    * Optional planar array frame kit PAF-2K for 3-wide array with ASB6128V subwoofer center. (See AE Series Array Guide).

    * For fixed installation applications such as performing arts facilities, theatrical sound design, auditoriums, houses of worship, live nightclubs, dance-clubs/discotheques, sports facilities and themed entertainment venues.

     

Frequency Range       :       38 Hz - 19 kHz (-10 dB)

Frequency Response       :       45 Hz - 17 kHz ( ± 3 dB)

Coverage Pattern       :       90°x 50°, rotatable waveguide

Directivity Factor (Q)       :       10

Directivity Index (DI)       :       10 dB

Crossover Modes       :       Tri-amp / Bi-amp switchable

Passive Crossover Slopes       :       MF/HF Section in Bi-amp mode: 4th order (24 dB/oct) Linkwitz-Riley HP & LP, 2.1 kHz

Transducer Power Rating (AES)       :       LF: 1000 W (4000 W peak), 2 hrs
600 W (2400 W peak), 100 hrs
MF: 350 W (1400 W peak), 100 hrs
HF: 75 W (300 W peak), 2hrs

Long-Term System Power Rating (IEC)       :       LF: 600 W (2400 W peak), 100 hrs
MF/HF: 350 W (1400 W peak), 100 hrs

Maximum SPL       :       LF: 125 dB-SPL cont avg
(131 dB peak)
Tri-amp mode:
MF: 133 dB-SPL cont avg
(139 dB peak)
HF: 132 dB-SPL cont avg
(138 dB peak)
Bi-amp mode:
MF/HF: 132 dB-SPL cont avg
(138 dB peak)

System Sensitivity of Passive Sections 6       :       MF/HF Section in Bi-amp mode: 108 dB SPL (1W @ 1m)
 

Wharfedale Titan 15 400W Rms - 1600W Peak ! 15" Moulded Lightweight Enclosure Passive Speaker

Built with the same rugged, injection molded chassis as our Titan™ 12, the Titan™ 15 is using custom designed, heavy duty 15” low frequency driver with 2” titanium high frequency compression driver. The Titan™ 15 is at home indoors or outdoors, on stage, in studios, at rehearsals, theaters, houses of worship and just about anywhere that needs a higher standard of audio reproduction. Use the Titan™ 15 with the optional tripod floor stands, the unique dual-head array adapter, optional wall mount or even on its side as a floor monitor. The Titan 15 moisture proof woofer makes it the ideal choice for outdoor gigs and festival applications. No matter what the application, Titan™ 15 is up for the challenge.

MODEL TITAN 15 PASSIVE
GENERAL INFO
System type 15” 2-way passive
Frequency response +/- 3db 50-18kHz
Sensitivity (db 1w@1m) 97dB
System impedance 8 ohms
Maximum SPL Peak dB 129dB
POWER HANDLING (Watts)
Continous RMS 400
Program 800
Peak 1600
LF DRIVER
Lf driver size mm / inches 1x15”
Lf voice coil size 75mm/3“
HF SECTION
Hf voice coil size 51mm/2“
Hf exit size mm / inches 25mm/1“
Hf type Compression Driver
Hf diaphragm material Titanium
Horn dispersion (H x V) 90 x 60
Hf horn shape EWG™ - Elliptical Waveguide
Hf peak indicator Peak LED ring in horn throat
CROSSOVER SECTION 2-way
Crossover Frequency / Filter 1.8kHz / 12dB per oct.
Hf driver protection DTF™ — Dynamic Thermal Filament (2 x SK3 Bulb)
CONNECTORS
IN / OUT PANEL (speaker Level)
Input connector 2 x 1/4” jacks and2 x Speakon™
PHYSICAL FEATURES
Enclosure type Molded Polypropylene
Enclosure shape Trapezoidal for vertical array and horizontal stage monitor applications
Finish Black or White
Handle quantity 2 carry handles (one on each side)
Suspenison points (10) M8 points for safe flown applications, (4) M8 inserts on bottom in OmniMount® 60.0-type footprint
Stand adapter - BOTTOM Pole-mount receptacle with lock screw, Optional wall-mount bracket
DIMENSIONS & WEIGHT
Height ( mm / ins ) 708mm/27.9“
Width Front / Rear / mm / ins 477.8mm/18.8“
Depth ( mm / ins ) 401.77mm/15.8“
Net weight ( kg / lbs ) 22kg/48.4 lbs
Gross weight ( kg / lbs ) 25kg/55 lbs.