Content |
Loudspeakers are the voice of any PA and Mackie S500 Series Passive Loudspeakers provide the professional power and performance you want for your system. Delivering class-leading power, S500 full-range loudspeakers are available from a highly-portable 2-way 12″ all the way up to a dual 15″ model that can handle up to 2400 watts of peak power. The sound quality is undeniably professional as S500 loudspeakers utilize high-quality components like custom-specified drivers and all-wood enclosures to deliver touring-quality sound in designs that are rugged and affordable. After all, there's no reason you should sacrifice sound quality for just a few bucks. With a chest-pounding subwoofer and a selection of full-range models, S500 Series Passive Loudspeakers easily outperform anything in their class.
Features: - 1200 watts peak
- 15" woofer / 1" HF driver
- PVC vinyl covered wood with protective edge bumpers
- Wide-dispersion 90° x 50° high-frequency horn
- HF protection circuitry
- NL4 and 1/4" input and thru connections
Specifications:
- Frequency Range (-10 dB): 47 Hz - 18 kHz
- Horizontal Coverage Angle: 90 °
- Vertical Coverage Angle: 50 °
- Sensitivity (1W @ 1m): 99.9 dB SPL
- Nominal Impedance: 8 ohms
- Power Handling: 300 watts continuous
- 500 watts program 1200 watts peak
- Crossover Frequency: 3400 Hz
Transducers
- Low Frequency: 15" / 381 mm woofer, vented
- High Frequency: 1" / 25 mm tweeter
Physical
- Input connectors: Two 1/4" TS jacks Two NL4 jacks, paralleled
- Enclosure: Wood with textured black PVC vinyl covering
- Dimensions: (W x H x D) 714 x 452 x 396mm
- Weight: 23kg
|
The passive dB500 has many of the same features as the dB500a, including the same rugged enclosure, and advanced drivers. A natural sounding fixed crossover is built-in, and the back panel features 1/4" and Speakon connectors.
The dB500 speaker cabinet features an array of mounting options. Designed with floor monitoring in mind, they are also easily stacked or permanently installed. A 1 3/8" pole receptacle is built in, and 10 reinforced fly points are available.
|
- 1.4" compression driver with 3" voice coil
- 15" woofer, high power, 3.5" voice coil
- 133 dB max spl
- Input Power Rating: 650 W AES
ART 725 MK4 is a passive two-way system with an accurate acoustic design for club installations and live music. Thanks to the high quality compression driver with a 3” voice coil and the 15” woofer, the ART 725 MK4 delivers clear high frequencies, punchy bass and full and precise mid frequencies. The new aluminium rear panel is equipped with Speakon in/out connectors.
Specifications
Acoustical specifications
Frequency Response (-10dB):
55 Hz ÷ 20000 Hz
Max SPL @ 1m:
133 dB
Horizontal coverage angle:
90°
Vertical coverage angle:
60°
System Sensitivity:
99 dB
Power section
Crossover frequencies:
1400
Transducers
Compression Driver:
1.4'' neo, 3.0'' v.c
Nominal Impedance (Ohm):
8 ohm
Input Power Rating:
110 W AES, 220 W PEAK
Sensitivity (dB, 1W @ 1m):
109 dB, 1W @ 1m
Woofer:
15'' neo, 3.5'' v.c
Nominal Impedance (Ohm):
8 ohm
Input Power Rating:
650 W AES, 1300 W PEAK
Sensitivity (dB, 1W @ 1m):
98 dB, 1W @ 1m
Input/Output section
Input connectors:
Speakon
Output connectors:
Speakon
Standard compliance
CE marking:
Yes
Physical specifications
Cabinet/Case Material:
PP Composite
Hardware:
2 x M10
Handles:
1 Top, 2 Side
Pole mount/Cap:
Yes
Grille:
Steel
Color:
Black
Size
Height:
708 mm / 27.87 inches
Width:
437 mm / 17.2 inches
Depth:
389 mm / 15.31 inches
Weight:
20.5 kg / 45.19 lbs
Shipping informations
Package Height:
725 mm / 28.54 inches
Package Width:
550 mm / 21.65 inches
Package Depth:
505 mm / 19.88 inches
Package Weight:
23.7 kg / 52.25 lbs |
The QRx153/75 is a biamped three-way full-range loudspeaker system capable of filling performance spaces with beautifully balanced audio and high acoustic output capability.
The QRx153 is designed to be bi-amplified at 500 Hz utilizing a DX38 digital controller, or a P1202 power amplifier with M153 control module. All QRx models use 13 ply plywood, Futura coating, and steel grilles for wear and weather resistance. The QRx153 is trapezoidal with 15° side angles. "L” track rigging is installed on the enclosure top and bottom. Small arrays can be flown for live work, or the system can be suspended horizontally or vertically for fixed installations.
Thanks to its combination of the DL15ST woofer and large enclosure volume; the horn-loaded 8-inch midrange driver and powerful 3-inch compression driver, the EV QRx153/75 has extended response for high-level, high fidelity applications without the need of a subwoofer. The horn-loaded midrange driver provides excellent pattern control in this critical response area. Both MF and HF horns are aimed downward 10° to provide optimal aiming when the speaker is elevated above the audience. This also helps control sound to provide greater intelligibility.
The QRx153/75 has an excellent combination of performance and flexibility for demanding audiences. | The P3115-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications.
The high-frequency section is a constant directivity CMD horn loaded to a 1” RCF Precision Neodymium compression driver with a 1.5” diaphragm assembly for smooth, wide dispersion. The low-frequency transducer is a 15” woofer with a 2.5” voice coil. The P3115-T features a selectable line transformer for 70 - 100 Volt applications. P 3115-T meets the requirements of IP 55 code (International Protection Rating).
- Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55
- Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing
- Stainless steel bracket
- 15" high-output LF transducer with 2" voice coil
- RCF Precision Neo 1" Compression Driver with 1.5" voice coil
- 90° x 60° constant directivity horn
- 10° X 20° enclosure sides for array configurations
- Active Mosfet Compression Driver Protection
- 12 brass suspension points (M10)
- Line transformer
Acoustical Specifications
- Frequency Response -10 dB: 75 Hz ÷ 20 kHz
- Max SPL @ 1m: 129 dB
- Horizontal coverage angle: 90°
- Vertical coverage angle: 60°
- Directivity index; Q: 13.3
- System Sensitivity: 98 dB
- Nominal Impedance: 16 Ω
- Power Handling: 300 W
- Peak Power Handling: 1200 W
- Protections: dinamyc
- Crossover frequencies: 1300 Hz
Transducers
- Compression Driver: 1" HF driver, 1.5" voice coil
- Nominal Impedance: 8 Ω
- Input Power Rating: 25 W AES
- Sensitivity: 108 dB
- Woofer: 15" woofer, 2.5" voice coil
- Nominal Impedance: 16 Ω
- Input Power Rating: 250 W AES
- Sensitivity: 98 dB
Input Section
- Input connector: 4-adriges Neopren Kabel, 5m
- Constant voltage transformer: 70/100 V
- Power Selection: 70V/60W, 30W , 100V/120W, 60W
Cabinet
- Cabinet Material: Polyethylene rotomoulded
- Hardware: 12 x M10 inserts+ U-brackets and pair of spacers
- Grille: Custom perforated aluminium grillewith open-cell fiber and water repellent woven fabric backing
- Colour: grey
Physical Specifications
- Height: 463 / 18.22 mm/inch
- Width: 463 / 18.22 mm/inch
- Depth: 433 / 17.04 mm/inch
- Net Weight: 19.4 / 42.76 kg/lbs
|
The P6215 is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system for very high output and longer throw applications.
The high-frequency section is a constant directivity CMD horn loaded to a 1.3” RCF Precision Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion.
The low frequency transducer is a 15” woofer with a 3” voice coil. The cabinet is equipped with 12 x M10 brass inserts, a stainless steel U-Bracket and pair of spacers for 90° mounting. P6215 meets the requirements of IP 55 code (International Protection Rating)
Features |
---|
Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55 | Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing | Stainless steel bracket | One 15" high-output LF transducer with 3" voice coil | One RCF Precision Neo 1.3" C. Driver with 2.5" voice coil | 60° x 60° conical horn | 10° X 20° enclosure sides for array configurations | Active Mosfet Compression Driver Protection | 12 brass suspension points (M10) | Line transformer |
Acoustical Specifications |
---|
Frequency Response -10 dB: | 75 Hz | ÷ 20 kHz | Frequency Response -3 dB: | 120 Hz | ÷ 20 kHz | Max SPL @ 1m: | 128 dB | | Horizontal coverage angle: | 60° | | Vertical coverage angle: | 60° | | Directivity index; Q: | 12.8 | | System Sensitivity: | 100 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 600 Watt | | Peak Power Handling: | 2400 Watt | | Protections: | Dynamic | | Crossover frequencies: | 1100 Hz | |
TRANSDUCERS |
---|
Compression Driver: | 1.3" HF driver, 2.5" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 90 Watt AES | | Sensitivity: | 108 dB | | Woofer: | 15" woofer, 3" coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 450 Watts AES | | Sensitivity: | 108 dB | |
INPUT SECTION |
---|
Input connector: | 4 x 1.5mm square, 5m Neoprene cable | |
CABINET |
---|
Cabinet Material: | Polyethylene rotomoulded | | Hardware: | 12 x M10 inserts | | Grille: | Custom perforated aluminium grillewith open-cell fiber and water repellent woven fabric backing | | Colour: | Grey | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 463 / 18.22 mm/inch | | Width: | 463 / 18.22 mm/inch | | Depth: | 433 / 17.04 mm/inch | | Net Weight: | 19.2 / 42.32 Kg/Lbs |
|
Reviews
There are no reviews yet.