| Content |
This sturdy equipment stand is perfect for studio, club installations, as well as home use and can be placed over your existing DJ setup. When DJs are faced with the "extreme lack of space in the DJ-booth and where to put my controller” problem, this stand is a helpful space-saving solution for clubs as it fits perfectly over a 12" club mixer like a Pioneer DJM-800. It also features non-slip rubber surface and feet to insure maximum stability during your performance and its overall elevated height provide best protection against spilled drinks, dirt, and more. The slightly angled controller and laptop platforms are both individually adjustable in height and width to find the right position for any controller setup. | Gravity LTS T 02 W Universal Laptop Stand with Adjustable Holding Pins and Steel Base
Live performers and studio musicians are familiar with having to find a place to put their laptop, tablet or central effect unit. But also being able to move your workstation around when working at home can be helpful to ensure a quick and flexible change of scenery. The LTST 02 W laptop stand from Gravity® offers you this possibility. Whether you're a musician, technician, photographer or stay-at-home worker, the universally applicable, flexible and very stable tray means you no longer need to worry about your work equipment.
There are many ways the large, height-adjustable tray panel, which offers enough space to accommodate all common 12 "to 17" laptops, can be used. The four adjustable retaining bolts - which can be removed if required - ensure the safe and secure positioning of laptops, tablets or compact mixers on the tray. Numerous ventilation slots enable the proper ventilation of electronics. Extra flexibility is offered by the tray panel which can be adjusted to any angle. This allows the LTST 02 W to be used both vertically and horizontally, for example, to keep your notes visible at all times when giving a talk.
The LTST 02 W is an extremely stylish laptop stand with a sleek look, mainly in part due to its single leg and a flat base made out of solid steel. In contrast to conventional tripods which are rarely used off stage or outside the studio due to their close resemblance to microphone and loudspeaker stands, the LST 02 W also cuts a fine figure at events, conferences or in offices. The height of the LTST 02 W can be flexibly adjusted between 79 cm and 129 cm, meaning it can also be used while sitting down.
With the LTST 02 W, Gravity® offers you a universal laptop stand that's bound to win you over as a flexible portable tool for setting up mobile performance rigs in a variety of situations.
| Product type |
Stands and Tripods Multimedia Equipment |
| Type |
Laptop Stand |
| Support material |
Steel |
| Tube material |
Steel |
| Tubing surface |
Powder-coated |
| Color |
White |
| Width adjusting jaws |
40 mm |
| Width spacing between adjusting pins min. |
120 mm |
| Width spacing between adjusting pins max. |
425 mm |
| Height spacing between adjusting pins to adjusting jaws min. |
117 mm |
| Height spacing between adjusting pins to adjusting jaws max |
250 mm |
| Width spacing between adjusting jaws min. |
130 mm |
| Width spacing between adjusting jaws max. |
360 mm |
| Support width |
480 mm |
| Tray height |
330 mm |
| Min. height |
790 mm |
| Max. height |
1200 mm |
| Transport length |
790 mm |
| Height adjustment |
Set screw with safety split pin |
| Dimensions Base (W x H x D) |
565 x 20 x 330 mm |
| Base material |
Steel |
| Base weight |
8.2 kg |
| Max. load capacity |
15 kg |
| Interchangeable rings |
1 x 25 mm, 2 x 30 mm, 4 x 15 mm |
| Black ring pack included |
Yes |
| Weight |
11,76 kg |
|
Gravity LTS T 01 Laptop stand
No matter if you're working on stage, at home, in the studio or on location at a photo shoot, now your laptop can stay firmly fixed in place and stable at all times in your mobile performance rigs -positioned just the way you want - all thanks to the Gravity® LTST 01 laptop stand.
The large mounting plate can accommodate all standard laptop sizes ranging from 12" to 17". Your laptop is carefully and securely attached to the stand thanks to 14 slots in the top section, 2 slots in the bottom section, and the freely adjustable holding pins and clamps that come supplied with the product. The holding pins are pressed onto the laptop and then locked into place from below using the set screws.
You can also use the stand for your DJ controller, mixer or other pieces of equipment that you always need within arm's reach. The mounting plate can be tilted continuously by 180°, meaning it can be used both in vertical and horizontal applications. It can also be easily twisted off for use in the field.
Its solid aluminium tripod with a 35 mm socket has been designed for maximum mobility because it weights only 1.94 kilograms. The stand's height can be gradually adjusted from 750 mm to 1.320 mm, allowing you to adjust it perfectly to your needs - whether you're standing or sitting.
With the LTST 01 laptop stand, Gravity® offers you a flexible companion for your mobile performance rigs.
Product type
Stands and Tripods Multimedia Equipment
Width spacing between adjusting pins min.
Width spacing between adjusting pins max.
Height spacing between adjusting pins to adjusting jaws min.
117 mm
Height spacing between adjusting pins to adjusting jaws max
250 mm
Width spacing between adjusting jaws min.
Width spacing between adjusting jaws max.
Height adjustment
Set screw with safety split pin
|
- Folding laptop stands for all formats from 12\" to 17\"
- Also suitable for controllers such as Launchpad, Machine or Push 2
- Extremely robust, lightweight aluminium construction
- Rapid set-up, with adjustable shelf and base angle
- Patented mechanism and design
- Non-slip rubber pads
- Compact transportation size
- With table clamp and practical clipboard
With its revolutionary patented design, this laptop stand is extremely robust, lightweight and easy to transport. With its revolutionary patented design, this laptop stand is extremely robust, lightweight and easy to transport. It is suitable for all formats from 12\" to 17\" as well as for controllers such as Launchpad, Machine or Push 2. It can be folded to a compact size in seconds. Securely locking eccentric clamps facilitate rapid tilt adjustment and locking of the non-slip rubber-coated shelf and base to provide optimal ergonomic use. The laptop stand is equipped with a table clamp and a clipboard, which are elegantly mounted on the middle rack.
Product type
Stands and Tripods
Type
Laptop Stand
Material
aluminium
Surface
powder coated
Colour
Black
Depth
280 mm
Width
260 mm
Height
270 mm
Max. board thickness for table mounting bracket
55 mm with base , 60 mm without base
Maximum load
8 kg
Weight
1,6 kg |
The new Traveler Laptop-Stand is a sturdy, extremely lightweight and foldaway DJ-equipment stand to support your laptop (12“-15“), iPad or other compact gear like Machine, APC 20, MPD 18, Launchpad etc. Especially frequently traveling DJs will appreciate its lightweight design which folds flat for space-saving storage in your laptop-bag.
- Sturdy fold-away laptop-stand made of Aluminum Alloy
- Accomodates a 12“-15" Laptop, Maschine, iPad, MPD 18, Launchpad, APC 20 etc.
- Super-lightweight (only 1250 g)
- Folds flat for space-saving storage (only 2 cm thick when folded)
- Assembled and folded in a breeze
- Slip-guard rubber feet and surface to protect your laptop
- Incl. transportation pouch
- Dimensions (H/W/D) : 30 x 22 x 23 (laptop platform) / 30 x 27,5 x 2 cm (folded)
| This tabletop stand is ideal to place your laptop, CD player or lighting controller into a convenient operating position. It holds equipment with a width of 22.5 cm or greater and is easily height adjustable from 17 to 34 cm. The stand is made of steel with a powder coat finish and fully collapsible for space-saving transport.
Product type
Stands and Tripods
Type
Laptop Stand
Material
Steel
Surface
Powder coated
Colour
Black
Depth
250 mm
Min. width
225 mm
Max. width
225 mm
Min. height
170 mm
Max. height
340 mm
Weight
1,4 kg |
Reviews
There are no reviews yet.