| Content |
The all-in-one audio/MIDI interface that fits in your pocket. The only Interface you need for making music on the go.
Wouldn't it be great to have one compact portable interface for your iPhone, iPad or Mac that you could use to connect your studio mics, your guitar or bass, your keyboards and your MIDI controller, and play, practice and record on the go? Ta Da! Now you can with iRig PRO.
iRig PRO is the first full-featured compact audio and MIDI interface you can use with your XLR microphones, your guitar and bass, your keyboard or other line-level source and your MIDI controllers. It features an XLR/1/4" combo jack for connecting microphones and instruments (accepts XLR and 1/4" TS cables), and a MIDI input for plugging in your favorite controller.
Now when you're on the go, you can record vocals, harmonies, acoustic instruments, electric guitar/bass, keyboards and more without changing your interface and disrupting your creative flow. You will find iRig PRO to be the most versatile iPhone and iPad accessory in your gig bag. And when you get back to your Mac, plug iRig PRO into your USB port and keep jamming away on your laptop or desktop.
Compact
You'll be amazed by the compact design of the unit and what it actually delivers. About the size of a travel tube of toothpaste, iRig PRO fits nicely into small spaces like your gig bag, the accessory compartment of your hardshell case or the side pocket of your cargo shorts. Just don't forget about it and run it through the laundry.
Multiple personalities, universal connectivity
iRig PRO can handle all of your stuff, including XLR condenser mics, guitars and basses, keyboards and other line-level sources, and MIDI controllers. Whatever you're connecting to your device, iRig PRO has you covered. And iRig PRO comes with 3 connector cables: Lightning, 30-pin and USB, to ensure that you've got the right connections.
Specs iRig PRO Specifications - Instrument Input: unbalanced, Hi-Z, TS 1/4” Jack, Tip: signal / Shield: ground
- Maximum Input Level: from 30 mVpp to 6.9 Vpp
- Instrument Input Impedance: 620 kOhms
- Microphone Input: balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
- Microphone Input Level: from 6 mVpp to 1.4 Vpp
- Microphone Input Impedance: approx 2 kOhms
- Gain Control Range: 47 dB
- Phantom Power: 48V +/-10%
- Input Noise: -97 dB RMS, -105 dB(A)
- Distortion (THD): 0.01%
- Frequency Response: 20Hz-20kHz +/- 0.5 dB
- Conversion: 24-bit A/D
- Sampling Rate: 44.1 and 48 kHz
- Battery: 9V (Alkaline suggested), needed for +48V phantom only
| Package includes | Dimensions | - iRig PRO universal Audio-MIDI interface
- iOS lightning connection cable
- iOS 30-pin connection cable
- USB connection cable
- 2.5mm jack to MIDI cable
- 9V Battery
| - Size: 32mm/1.26" x 105mm/4.14" x 21mm/0.85"
(W x L x H) - Weight: ~40g/1.41oz
|
Requirements iOS Devices
Compatible with iPhone 5, iPhone 4S, iPhone 4, iPod touch (5th, and 4th generation), iPad 4th generation, iPad 3rd generation, iPad 2, iPad and iPad mini. iOS 5.1 or later is required.
Mac®: Mac OS X 10.5 or later. One free USB port.
Windows®: Support using the ASIO4ALL driver on Windows XP/Vista/7/8. See our FAQ here for further details.
| Your go-to mic to goIntroducing the First studio quality
mic preamp for the iOS platform
Here's how you use it: Take the microphone you use every day on stage or in the studio and plug it into your iOS device. It's that simple. Need Phantom Power? Flip the "Phantom Power" switch. Congratulations, you've just become a professional user.
This is perhaps the most important product introduction for musicians and the rest of the civilized world since the iPod and iPad. Now, thanks to the iRig Pre, you can hook your favorite microphone to your iOS device and join the mobile music revolution. Create music any time, anywhere with your own high quality microphones on your iPhone, iPod touch or iPad.
So now if you want to record that special riff using your own ribbon microphone and mix it on your iPhone, you can. Simply plug the iRig Pre into the headphone jack of your iOS device, activate phantom power if necessary, launch your recording software and wail away.
Hey, is that a Preamp in your pocket?
Why yes, as a matter of fact it is! The iRig PRE sports an ultra-compact design so it fits pretty much anywhere. Just slightly larger than a 9 volt battery, you'll be amazed at how quickly you'll misplace your iRig PRE. But don't let the small size fool you. iRig Pre is a professional sounding mic preamp that will dazzle you and your friends.
Specs iRig PRE Specifications
- Frequency response: from 20 Hz to 20 kHz +/- 1.5dB
- Noise: -98 dB fullband, phantom power ON
- Maximum output level: 2 Vrms
- Distortion: 0.025% THD
- Phantom max current: 6mA
- Battery duration (Alkaline 9V cell): approx 30 hours when phantom is off, approx 10 hours when phantom is on
| Package includes |
Dimensions |
- iRig PRE
- 9V Battery
- Velcro Strip
|
- 32mm/1.26" x 35mm/1.38" x 83mm/3.27“
(W x L x H)
- Cable lenght: 450mm/17.72“
(Connector included)
- Weight: 100g/3.53oz (Battery included)
|
Requirements iOS Devices
iRig PRE is compatible with iPhone 5s, iPhone 5c, iPhone 5, iPhone 4S, iPhone 4, iPhone 3GS, iPod touch (5th, 4th and 3rd generation), iPad Air, 4th generation, iPad 3rd generation, iPad 2, iPad and iPad mini. iOS 4.3 or later is required.
Android Devices
Works with most Android devices including: Google Nexus S, HTC Desire HD, Samsung Galaxy S III, Samsung Galaxy S II, Samsung Galaxy W, Samsung Galaxy S, Samsung Galaxy Note, Samsung Galaxy Nexus, Samsung Galaxy Tab 10.1, Samsung Galaxy Tab 7 plus.
Mac®: Most Mac computers starting from late 2008 are compatible with the exception of the Mac Pro line.
To check if your Mac is compatible select: About This Mac > More Info > System Report > Audio
and check that "External Microphone / iPhone headset" is appearing on the list of included features. |
System Requirements iOS: Devices: iPad and iPhone 4
iOS version: 4.3 and later Connection: Dock connector port (no batteries required) *Software: Made for GarageBand Mac OS: Computer: Mac, with an Intel processor
Memory: 1 GB minimum of installed RAM, 2 GB recommended
Mac OS version: 10.6.4 or later
Connection: USB 2.0 Full Speed Software: GarageBand, Logic Pro, MainStage or any Core Audio compatible application Features -
PureDIGITAL instrument connection delivers pristine sound quality -
Designed for electric guitar and bass -
No confusing setup, you can start recording in minutes - Works with GarageBand on iPad and iPhone or with any Core Audio compatible application on a Mac
-
Control knob allows easy input level adjustment -
Multicolor LED for status indication and input level monitoring -
Studio quality instrument preamp with up to 40dB of gain -
High quality locking output connects directly to iPad and iPhone or USB port on a Mac -
44.1kHz, 24-bit analog-to-digital conversion -
Auto Soft Limit for optimal input level - Powered by connection to iPad, iPhone or Mac
-
Made in the U.S.A.
In the box - JAM
- 0.5m cable for connection to iPad and iPhone
- 1m cable for connection to Mac
- Quick start guide
- Velcro strip
| The most popular guitar interface of all time just got better
How do you improve upon something so revolutionary that it changed the world? iRig 2 is the answer.
In 2010, for the first time ever, the original iRig allowed guitar and bass players to plug into their iPhone and use their mobile device to play, practice and record with apps like IK's AmpliTube, Appleʼs GarageBand and thousands more.
iRig 2 builds upon the success of its predecessor by introducing essential new features — like adjustable input gain, cross-platform compatibility and a 1/4" amplifier output — that will once again revolutionize the way you make your music while on the go.
Now everyone can plug in their guitar, bass or other instrument and enjoy killer tone on their iPhone, iPad, iPod touch, Mac or Android device — with the release of iRig 2, the worldʼs most popular guitar interface is now better than ever before.
Plug and play simplicity on every device
If you loved iRig's versatility, you'll love iRig 2's new adjustable gain dial, whcih works with its built-in 1/8" TRRS output connector to give you a true plug-and-play experience with your iPhone, iPad, iPod touch, Mac or Samsung Professional Audio compatible Android device.
Volume levels vary from instrument to instrument and from device to device. And while the original iRig provided superior sound, it was limited in that you were unable to customize the input gain level to your particular setup. With iRig 2, you get an input gain dial that gives you the power to ensure high-quality sound in every situation. This means that you'll be able to perform at your best no matter whether you're connecting a wailing 3 humbucker electric guitar to your Samsung Galaxy Note 4 or a jazzy archtop to your iPhone 6.
Likewise, its 1/4” instrument input works with your guitar, bass or any line-level instrument. Just plug into it like you would into a stompbox or amplifier. Itʼs as simple as that.
- The sequel to the best-selling iRig interface
- 1/4” instrument input for use with guitar, bass and other line instruments
- 1/4” amplifier output for use with an external amplifier without an adaptor
- 1/8” TRRS output for use with iPhone, iPad, iPod touch, Mac and Android
- 1/8” headphone output
- Compact and lightweight design
- Selectable dual-mode switch: FX and THRU
- Input gain thumbwheel for easy signal control
- Comes with microphone stand Velcro strip
- Comes with AmpliTube FREE and a full suite of powerful IK applications and software
A digital rig with physical presence
With iRig 2, youʼll be able to enjoy IKʼs full range of AmpliTube apps (the #1 app for guitar players). It's ready to go right out of the box. It comes with a powerful cross-platform suite of apps and software that includes free versions of AmpliTube for iOS, Android and Mac/PC.
To use, just download your preferred version for iOS from the App Store or for Android from the Google Play Store or from Samsung GALAXY Apps. Then plug your guitar or bass into iRig 2, plug your amplifier or headphones into your device and launch the app.
Specs iRig 2 Specifications
- Input Impedance: 380 kOhms
- Frequency Response: 20Hz-20kHz +/- 0.2 dB
- Instrument Input Connection: 1/4" Jack
- Amplifier Output Connection: 1/4" Jack
- Device Output Connection: 1/8" TRRS Jack
- Headphone Output Connection: 1/8" Jack
Package includes
- iRig 2 guitar interface
- Detachable microphone stand Velcro-slot
- Velcro strip
Dimensions
- Size: 72mm/2.83" x 39mm/1.54" x 21mm/0.85“
- Weight: 43g/1.57oz
|
iKlip MINI is a universal microphone stand adapter for the iPhone® and iPod touch® to support your iOS device on stage, in the studio, at school or in the office. iKlip MINI securely supports your iPhone/iPod touch on any standard mic stand, pole or tripod (with diameters ranging from 11 - 20 mm /.43" - .79“) placed on the floor or tabletop.
Made of sturdy, durable thermoplastic, iKlip MINI is compatible with every existing iPhone and iPod touch, from the original models to the latest generation devices.
Cutting-Edge Italian Design,
Solid Construction
Designed and manufactured in Italy, iKlip MINI firmly holds the device in place in both horizontal and vertical positions, and its multi-angle adjustable design allows optimal viewing and accessibility with all controls, buttons, connection ports and camera kept free from obstruction. It can also be easily rotated from portrait to landscape position by simply loosing or tightening a knob with no need for additional tools. It can be mounted on the vertical pole of a mic stand as well as on its horizontal boom.
An included detachable bracket supports our popular iRig guitar interface adapter together with iKilp MINI in both horizontal and vertical mounting positions so you can have immediate access to your iOS device multi-touch controls during your live performances with the AmpliTube range of apps or any other guitar effects app.
The perfect companion
for iRig Mic and a multitude of Apps
iKlip MINI is also the perfect companion to IK's iRig Mic, the handheld microphone for iOS devices, that allows vocalists and speakers alike to conveniently hold and operate the device at a close distance on the same mic stand with IK's VocaLive or any other vocal processing app.
There are a variety of apps for iPhone/iPod touch that benefit from the iKlip MINI's floor or tabletop mic stand support including karaoke, score and tablature, DJ, recording, mixing, video, photography, teleprompting and many more. Everything you use on your iPhone or iPod is now right within your reach.
Features:
- Sturdy, durable thermoplastic construction holds your iPhone and iPod touch securely without scratching or marring it
- Compatible with all previous and current iPhone and iPod touch models
- Firmly attaches to virtually any microphone stand, pole and tripod with diameters of 11 - 20 mm /.43" - .79“
- Horizontal or vertical mounting with multi-angle adjustment and easy rotation
- Can be placed on the mic stand vertical pole or its horizontal boom
- All controls, buttons, connectors and camera of the iOS device are accessible
- Fast installation - can be mounted in seconds
- Includes detachable iRig bracket for the AmpliTube range of apps or any other guitar effects app
- Perfect companion to the iRig Mic handheld microphone and vocal processing apps such as VocaLive
- Can be used with a variety of apps including karaoke, score and tablature, DJ, recording, mixing, video, photography, teleprompting and many more
- Designed and manufactured in Italy
iKlip MINI Specifications - Dimensions: 95 x 140 x 80mm / 3.74 x 5.51 x 3.15“
- Weight: 150 gr / 5.29 oz
- Material: ABS/PC
- Pole diameters: 11-20 mm /.43 - .79“
- Includes detachable iRig bracket
|
Features
Works on any smartphone or tablet that supports Android 4.2 or higher and host mode/USB OTG
Works on Mac or PC via optional USB to Micro-USB cable.
Near-zero latency digital FX processing
Digital audio recording on Android 5.0 and Samsung Professional Audio Devices as well as Mac and PC
32-bit digital signal processor
24-bit converter with 44.1/48KHz sample rate
High-definition, low-noise preamp
Includes AmpliTube UA
Registration unlocks AmpliTube Metal, 25 Gear Credits for AmpliTube Custom Shop and T-RackS Classic for Mac/PC
Analog aux input for play-along and practice
Headphone output and volume control
Multicolor LED
Ultra-compact and lightweight design
Micro-USB port
|
Reviews
There are no reviews yet.