ORTOFON GT REPLACEMENT STYLUS

35.00 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Spherical replacement stylus for Ortofon GT cartridge.

 

Read more

Spherical replacement stylus for Ortofon GT cartridge.
Weight 0.10 kg

Reviews

There are no reviews yet.

Be the first to review “ORTOFON GT REPLACEMENT STYLUS”

Your email address will not be published. Required fields are marked *

Quick Comparison

ORTOFON GT REPLACEMENT STYLUS removeORTOFON STYLUS 310 removeORTOFON STYLUS DIGITRACK removeORTOFON DJ S STYLUS removeORTOFON STYLUS 14 removeORTOFON 40 REPLACEMENT STYLUS remove
NameORTOFON GT REPLACEMENT STYLUS removeORTOFON STYLUS 310 removeORTOFON STYLUS DIGITRACK removeORTOFON DJ S STYLUS removeORTOFON STYLUS 14 removeORTOFON 40 REPLACEMENT STYLUS remove
Image
SKUGT STYLUSSTYLUS310STYLUSDIGITRACKSTYLUS DJ SSTYLUS14STYLUS40
Rating
Price35.00 incl. GR VAT59.00 incl. GR VAT43.00 incl. GR VAT48.99 incl. GR VAT57.00 incl. GR VAT329.00 incl. GR VAT
Stock

In stock

Available on backorder

Available on backorder

In stock (can be backordered)

Available on backorder

Available on backorder

AvailabilityIn stockAvailable on backorderAvailable on backorderIn stock (can be backordered)Available on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentSpherical replacement stylus for Ortofon GT cartridge.Ortofon 310 Stylus Technical Data
  • Frequency range 20-20.000 Hz
  • Frequency response 20-18.000 Hz + 2 / - 3 dB
  • Tracking ability at 315Hz at recommended tracking force 60 µm
  • Compliance, dynamic, lateral 20 µm/mN
  • Stylus type Elliptical
  • Stylus tip radius r/R 8/18 µm
  • Equivalent stylus tip mass 0,5 mg
  • Tracking force range 1,25-1,75 g (12,5-17,5 mN)
  • Tracking force, recommended 1,5 g (15 mN)
  • Tracking angle 20°
  • Stylus colour Grey
  • Recommended for following cartridges Series 310 Universial

This replacement stylus is designed for playback on coded vinyl. It has a superior tracking ability and causes low record wear. It is a spherical stylus with an output of 8.0 mV.

DJ S Replacement stylus DJ S is a solid-built cartridge in a blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever that provides outstanding rigidity. Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ. The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied. The DJ series of cartridges are great for any style of music, and has been a favored choice of DJs around the world! DJ S Stylus Technical data Output voltage at 1000Hz, 5cm/sec.  - 6 mV Channel balance at 1kHz  - 2 dB Channel separation at 1kHz  - 23 dB Channel separation at 15 kHz  - 15 dB Frequency range at -3dB  - 20-20.000 Hz Frequency response  - 20-18.000 Hz 3dB/-2dB Tracking ability at 315 Hz at recommmende tracking force  - 80 μm Compliance, dynamic lateral -  9 μm/m N Stylus type  - Spherical Stylus tip radius  -  R 18 μm Tracking force range  - 2,0-4,0 g (20-40 mN) Tracking force recommended -  3,0 g (30 mN) Tracking angle -  20° Internal impedance, DC resistance -  750 Ohm Internal inductance  - 450 mH Recommended load resistance  - 47 kOhm Recommended load capacitance  - 200-600 pF Cartridge weight  - 18,5 g Compatible with cartridges -  DJ S

Ortofon 14 Stylus Technical Data

  • Frequency range 20-22.000 Hz
  • Frequency response 20-20.000 Hz + 2 / - 2 dB
  • Tracking ability at 315Hz at recommended tracking force *) 70 µm
  • Compliance, dynamic, lateral 25 µm/mN
  • Stylus type Elliptical
  • Stylus tip radius r/R 8/18 µm
  • Equivalent stylus tip mass 0,5 mg
  • Tracking force range 1,0-1,5 g (10-15 mN)
  • Tracking force, recommended 1,25 g (12,5 mN)
  • Tracking angle 20°
  • Stylus colour Black
  • Recommended for following cartridges TM 14U
  • Stylus 40

    Technical data
    Frequency range 20-30.000 Hz
    Frequency response 20-30.000 Hz + 2 / - 3 dB
    Tracking ability at 315Hz at recommended tracking force *) 90 µm
    Compliance, dynamic, lateral 25 µm/mN
    Stylus type Nude FG 70
    Stylus tip radius r/R 5/70 µm
    Equivalent stylus tip mass 0,3 mg
    Tracking force range 1,25-1,75 g (12,5-17,5 mN)
    Tracking force, recommended 1,5 g (15 mN)
    Tracking angle 20°
    Stylus colour Black

     
    Recommended for following cartridges OM 40, OM 40 GOLD 
    *) Typical value
    Weight0.10 kg0.20 kg0.20 kg0.30 kg0.20 kg0.20 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 0.10 kg
    Weight 0.20 kg
    Weight 0.20 kg
    Weight 0.30 kg
    Weight 0.20 kg
    Weight 0.20 kg