Content |
Add some serious style to your deck with these sleek, metallic headshells from Ortofon. The SH-4 is a much better look than your standard black plastic headshell plus features a big finger lift, short head to make it easier to watch and place your stylus on the groove, and gold plated wire terminals for a better signal. Mounting screws included. Offering the type of premium quality DJs have long come to expect from ORTOFON, the SH-4 model headshell delivers superior performance and durability and is compatible with all DJ turntables and DJ cartridges on the market.
ORTOFON SH-4 HEADSHELL SPECIFICATIONS:
- ALL METAL CONSTRUCTION
- GOLD PLATED TERMINALS
- INCLUDES MOUNTING SCREWS
- WORKS WITH ANY CARTRIDGE (PERFECT FOR ORTOFON OM SERIES)
- MADE IN JAPAN
| Technical Data
Output voltage at 1 kHz 5 cm/sec 0,5 mV
Channel balance
Channel separation at 1 kHz > 23 dB
Channel separation at 15 kHz > 15 dB
Frequency range at -3 dB 20 Hz - 50 kHz
Frequency response 20 Hz - 20 kHz +2/-1
Tracking ability at 315 Hz at recommended tracking force *) 80 μm
Compliance, dynamic, lateral 12 μm/mN
Stylus type Nude FG 70 on Ruby cantilever
Stylus tip radius r/R 6/70
Tracking force range 2,2-2,7 g (22-27 mN)
Tracking force recommended 2,5 g (25 mN)
Tracking angle 20º
Internal impedance, DC resistance 5 Ohm
Recommended load impedance 50-200 Ohm
Cartridge body material Stainless steel Aluminium
Cartridge colour Blue/Black
Cartridge weight 10,7 g |
Exceptionally high quality carbon fiber headshell, the LH-9000 is made using carbon fiber resin for the elimination of unwanted resonances. The LH-9000 is perfect for a variety of high-end cartridges, e.g. Cadenza Series, MC A95 and MC Windfeld Ti.
Knowing the fundamental headshell dimensions will in a lot of cases make it easier to mount and align cartridge and tonearm correctly. Please find Ortofon headshells dimensions chart here.
Features and Technical data
- Universal mount
- Magnesium with carbon fiber
- Weight - 16.8 grams
- Mounting distance - min 38 mm, max 46 mm
- High Purity Copper headshell leads (LW-7N) included
|
Technical data
Quintet FrontBlack02
Output voltage at 1000 Hz, 5cm/sec. 0.3 mV
Channel balance at 1 kHz
Channel separation at 1 kHz > 23 dB
Channel separation at 15 kHz > 15 dB
Frequency range at - 3dB 20 - 25.000 Hz
Frequency response 20-20.000 Hz +/- 1.5 dB
Tracking ability at 315Hz at recommended tracking force *) 80 µm
Compliance, dynamic, lateral 15 µm/mN
Stylus type Nude Shibata on Boron cantilever
Stylus tip radius r/R 6/50 µm
Tracking force range 2.1-2.5 g (21-25 mN) Quintet SideBlack01
Tracking force, recommended 2.3 g (23 mN)
Tracking angle 20°
Internal impedance, DC resistance 5 Ohm
Recommended load impedance > 20 Ohm
Cartridge body material ABS/Aluminium
Coil wire material Aucurum
Cartridge colour Black
Cartridge weight 9 g
| Technical data
Output voltage at 1 kHz 5 cm/sec 0,45 mV
Channel balance
Channel separation at 1 kHz > 23 dB
Channel separation at 15 kHz > 15 dB
Frequency range at -3 dB 20 Hz - 50 kHz
Frequency response 20 Hz - 20 kHz +3/-1
Tracking ability at 315 Hz at recommended tracking force *) 80 μm
Compliance, dynamic, lateral 12 μm/mN
Stylus type Nude Fine Line on Alu cantilever
Stylus tip radius r/R 8/40
Tracking force range 2,2-2,7 g (22-27 mN)
Tracking force recommended 2,5 g (25 mN)
Tracking angle 20º
Internal impedance, DC resistance 5 Ohm
Recommended load impedance 50-500 Ohm
Cartridge body material Stainless steel Aluminium
Cartridge colour Red/Black
Cartridge weight 10,7 g |
13g TechniHard™ adjustable headshell with AT6101 quad wire.
- Adjustable overhang and adjustable azimuth (tilt)
- Threaded headshell avoiding in use of nuts when fitting cartridge
- 7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
- 1 hexagon wrench (for overhanging and tilt adjustment)
|
Reviews
There are no reviews yet.