| Content | Replacement stylus suitable for the Ortofon Nightclub E cartridge.
• Output voltage at 1000Hz, 5cm/sec.: 8 mV
• Channel balance at 1kHz: 1,5 dB
• Channel separation at 1kHz: 23 dB
• Channel separation at 15 kHz: 15 dB
• Frequency range at -3dB: 20-22.000 Hz
• Frequency response: 20-20.000 Hz +/-1,5 dB
•Tracking ability at 315 Hz at recommmende tracking force: 80 μm
• Compliance, dynamic lateral: 7 μm/mN
• Stylus type: Special Elliptical
• Stylus tip radius: r/R 13/25 μm
• Tracking force range: 2,0-5,0 g (20-50 mN)
• Tracking force recommended: 3,0 g (30 mN)
• Tracking angle: 20º
• Internal impedance, DC resistance: 1.000 Ohm
• Internal inductance: 580 mH
• Recommended load resistance: 47 kOhm
• Recommended load capacitance: 200-600 pF | DJ S Replacement stylus
DJ S is a solid-built cartridge in a blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever that provides outstanding rigidity.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ. The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
The DJ series of cartridges are great for any style of music, and has been a favored choice of DJs around the world!
DJ S Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-20.000 Hz
Frequency response - 20-18.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Spherical
Stylus tip radius - R 18 μm
Tracking force range - 2,0-4,0 g (20-40 mN)
Tracking force recommended - 3,0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 18,5 g
Compatible with cartridges - DJ S |
Stylus 5 Spherical
| Technical data |
|
| Frequency range |
20-20.000 Hz |
| Frequency response |
20-15.000 Hz ± 2 dB
|
| Tracking ability at 315Hz at recommended tracking force *) |
60 µm |
| Compliance, dynamic, lateral |
15 µm/mN |
| Stylus type |
spherical |
| Stylus tip radius |
R/18 µm |
| Equivalent stylus tip mass |
0,5 mg |
| Tracking force range |
1,75-2,25 g (17,5-22,5 mN)
|
| Tracking force, recommended |
2 g (20 mN)
|
| Tracking angle |
20° |
| Stylus colour |
Black |
|
OM 5,OMB 5, LMA 5, SMB 5 |
*) Typical value | Replacement stylus for the CC-1 Cartridge.
* Frequency response: 20 to 22,000Hz
* Output: 6mV
* Channel separation nominal: 28dB
* DC resistance: 430 ohms/ch
* Inductance: 400mH/ch
* Weight: 18.0g
* Channel balance: within 1.5dB
* Tracking force: 3–6g
* Recommended load: 47K ohms 200pf
* Stylus tip: fine circular diamond
* Application: high versatility and skip resistance | Stylus 5E
| Technical data |
|
| Frequency range |
20-25.000 Hz |
| Frequency response |
20-25.000 Hz |
| Tracking ability at 315Hz at recommended tracking force *) |
|
| Technical data
Frequency range 20-20.000 Hz
Frequency response 20-15.000 Hz + 2 / - 3 dB
Tracking ability at 315Hz at recommended tracking force *) 60 µm
Compliance, dynamic, lateral 15 µm/mN
Stylus type spherical
Stylus tip radius r/R 8/18 µm
Equivalent stylus tip mass 0,5 mg
Tracking force range 1,25-2,25 g (17,5-22,5 mN)
Tracking force, recommended 2,0 g (20 mN)
Tracking angle 20°
Stylus colour Black
Recommended for following cartridges - Dual TKS 49 S
*) Typical value |
Reviews
There are no reviews yet.