Content |
Palmer PWT 06 19" Multiple Power Supply
The Palmer PWT 06 is an extremely high-performance multiple power supply in 19" rack format with 6 isolated outputs, each of which delivers a maximum current of 1,000 mA (1A). It is the convenient and practical solution for powering wireless systems and eliminates the need for individual power adapters in power strips. The PWT 06 can power up to 12 wireless systems with DC current simultaneously, e.g., Sennheiser EM100G3, AKG 4500SET, Shure ULXP4, Line6 XDV75 or LD Systems products ranging from the LDMEI1000 to the LDWS1000R2 dual receiver.
The polarity is individually adjustable for each of the rear panel outputs, as is the output voltage of 9, 12 or 18 VDC; connections are made via 5.5 x 2.1 mm power sockets and 6 included DC cables. The PWT 06 package includes six Y-cables for supplying power to two devices via one output as well as a strain relief bar that can be used to secure the cables. Two-coloured indicator LEDs on the front panel of the PWT 06 for all outputs clearly show correct functioning or a possible malfunction.
- Type: Universal power supply
- Power socket: Schuko power cord
- Input voltage: 115 - 250 V
- Number of outputs: 6
- Output connections: 2.1 x 5.5 mm
- Output voltage: 9, 12, 18 V
- Max output current: 1000mA per output
- Outputs isolated: yes
- Polarity: switchable
- Length of cable: 1 m
- Indicators: 6x status LEDs, power
- Controls: Voltage, polarity, voltage selection switch
- Dimensions: 480 x 210 x 45 mm
- Other features: 6x long DC cable and 6x Y cable included
|
Power supply with voltage selector, 115/230 volts and 5 x 9VDC isolated outputs (120 mA each). |
- Choice of 9V DC, 12V DC, 12V AC or 18VDC -150mA
- Noise-cancelling galvanic isolated outputs
- Traditional EI Transformer
- Several different voltage types served
- Current doubler = the possibility of as much as 600 mA
- Switchable 115V or 230V
- Compact, rugged, road-ready design
| 12 Volts DC +(-) 1000 mA TC Approved Power Universal mains voltage with releavnt international plug adapters supplied | User\'s manual
Palmer MI PWT 04
Universal Pedalboard Power Supply 4-Outputs
- Fully regulated universal pedalboard power supply
- 4 standard centre negative outputs with 1,000 mA output total
- Short circuit and overload protection for each outlet
- DC cables and mains adapter included
The PWT 04 is a universal pedalboard power supply with 1,000 mA output capacity and 4 standard centre negative 9 V DC isolated outputs. Featuring short circuit and overload protection, the PWT 04 is fully regulated to deliver constant voltage. The unit sports a power on LED, and comes with a set of DC cables and dedicated mains adapter.
Product type
Power Supplies
Input voltage
100 - 250 V
Outputs
4
Output connectors
2.1 x 5.5 mm
Output voltage
9 V
Max. output current
each output 250 mA
Isolated outputs
yes
Polarity
center negative
Cord length
25 - 50 cm
Indicators
Power
Width
80 mm
Depth
90 mm
Height
25 mm
Weight
0,12 kg
Accessories (included)
4 x DC cable |
Universal Effects Pedal Floor Board with Integrated Power Supply
Ultra-compact and lightweight pedal board for transporting up to 12 effects pedals
Generous 1.7 A power adapter included for powering more than 12 devices*—includes all cabling
Ultra-rigid plastic design withstands even heavy impact
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Love your pedal chain? Rather than tossing your effects and their individual power adapters into a duffel bag after a gig, keep them safe—and ready to rock at a moment's notice—with the PB1000.
It's all about connections
This pedal board makes hooking up 12 2.5" x 4.5" pedals as easy as hooking up just one (of course, if you're using pedals that aren't 2.5" x 4.5“, the snug foam padding can be cut to accommodate pedals of varying shapes). The PB1000 includes ¼" patch cables, so you can leave your pedals connected to one another, ready to pass signal even when you're transporting them. It also comes with 1 x 12 daisy chain cabling so that when you plug in the 1.7 A power adapter, all your pedals receive power.
The Ins and Outs
Connect your guitar, bass or keyboard to the single ¼" input in the upper right corner of the board. A pair of ¼" FROM EFFECTS jacks in the upper left corner allow you to connect stereo effects, and two ¼" OUTPUT TO AMP jacks send a left and right stereo signal to up to two amps. When it is time to load out, just unplug the power supply, disconnect your guitar and amp, put the lid back on the PB1000 and slide the locking latches back into place. The heavy-impact plastic casing will protect your pedals from the rigors of the road.
Value
You have invested considerable time and money into your effects chain. Keep it safe and sounding great with the PB1000. Check it out at your nearest BEHRINGER dealer.
User's Manual
|
Reviews
There are no reviews yet.