| Content |
The DDJ-SB2 takes you beyond control. Not only does it boast all popular features from the DDJ-SB, it also adds some amazing new pro-DJ functions.
Hitting the decks has never been easier and more intuitive - even for first-time DJs. This controller has been upgraded with 4-deck control and dedicated buttons to switch between channels effortlessly. Plus a trim knob and level meters to master the input volume, and Pad Trans beat effects will uplift your DJ skills in no time.
DDJ-SB2 Full Feature List: - USB powered
- Combo HP/LP filter for each channel.
- Hot Cue, Auto Loop, Manual Loop and Sampler modes
- Dedicated Serato software FX Control
- Single Mic Input (1/4” jack)
- Master RCA output
- Both 1/4” and 1/8” mini jack headphone outs
- Full MIDI Support with MIDI Out
- High resolution, touch sensitive jog wheels
- The popular Filter Fade control that adds two high pass filters to the crossfader
DDJ-SB2 vs DDJ-SB; New Features - A Brighter Display
- Improved Button Layout
- 4 Deck controls
- Pad Trans beat effect to cut volume of a track in time with the BPM using the performance pads
Pioneer DDJ-SB2 2 Channel Serato DJ Controller - Black
• Two channels allowing you to control two tracks, loops or samples at a time
• Master and two headphone outputs allowing you to connect speakers and headphones at the same time
• Microphone input allows you to add voice into the mix
• Ten on-board effects powered by iZotope
• Compatible with PC and Mac
• Serato DJ Intro software included
Special Feature
• Filter Fade function allows DJs to do more than just mix
What has been improved from the DDJ-SB?
The DDJ-SB2 not only boasts all of the popular features from the DDJ-SB but it also adds some amazing new pro-DJ features. The DDJ-SB2 features 4-deck control and dedicated buttons for switching between channels. The trim knob and level meters allow you to master the input levels. The Pad Trans beat effects will uplift your DJ skills in no time.
Channels and Controls
The DDJ-SB2 is a two channel DJ controller allowing you to control two tracks, loops or samples at the same time. Each channel features manual high/low pass filters. There are two large aluminium jog wheels which provide dynamic performance and great scratch response. On-board controls provide immediate access to play, cue, sync, shift, hot cue, auto loop, manual loop and sampler functions. A unique filter fade function allowing you to manipulate both volume and base filters with the use of the cross fader, adding effortless transitions to your mix.
What can I connect to my DDJ-SB2?
The DDJ-SB2 features a master output connection allowing for connection to an amplifier or powered speakers. There are two headphone channels with both 1/4" and 3.5mm sockets on each channel allowing you to monitor your mix and professionally manage loops and transitions. The DDJ-SB2 has a USB MIDI connector allowing it to be used as a MIDI controller.
Compatibility and Software
The DDJ-SB2 has been designed for plug-and-play control of the included Serato DJ Intro software allowing for quick installation and setups. The DDJ-SB2 is MIDI compatible with compatibility with a wide range of alternative DJ software, allowing you to choose from a diverse library of industry leading mixing software. The DDJ-SB2 is both PC and Mac compatible with support for 32 bit or 64 bit operating systems.
| Specifications |
| | Dimensions |
| | Height | 58.5 mm | | Width | 487 mm | | Depth | 271.2 mm | | Weight | 2100 g | | Software System Requirements |
| | Windows 7 (32 bit) | (CPU) 2.0 GHz Core 2 Duo, (Memory) 1GB | | Windows 7 (64 bit) | (CPU) 2.4 GHz Core 2 Duo, (Memory) 1GB | | Mac OS (32 bit) | (CPU) 2.0 GHz Core 2 Duo, (Memory) 1GB | | Mac OS (64 bit) | (CPU) 2.4 GHz Core 2 Duo, (Memory) 1GB | | Display Resolution | 1280 x 720 or higher | | Connections |
| | Power Requirements | USB Powered | | Inputs |
|
| 1 x Microphone (6.35 mm, 1/4" Jack Socket) | | Outputs |
|
| 1 x Master (Phono/RCA) |
| 2 x Headphone Monitor (3.5mm/1/4" Jack combination) |
| USB (MIDI Control) |
| 1 x Master (Phono/RCA) | | Main Features |
| | Included Software | Serato DJ Intro | | USB Bus Powered | Yes | | Soundcard | 24-bit/44.1 kHz | | Plug and Play | Yes | | Supported Audio Formats | MP3, OGG, AAC, M4A, ALAC, AIF, WAV | | Performance Controls |
| | Channels | 2 | | Deck Control | 4 | | Filter | High & Low Pass filter | | Effects | 10 effects | | Hot Cues | 4 | | Autoloop | Yes | | Manual Loop | Yes | | Jog Wheel | Yes | | Slip Mode | Yes | | Talkover Function | Yes | | Package Contents |
|
| 1 x DDJ-SB2 DJ Controller |
| 1 x USB Cable |
| 1 x CD-ROM Installation Disc |
| 1 x Quick Start Guide |
| USB MIDI 2-deck Controller with Dual Platters, Pitch Controls, Transport Controls, and Cue Functions
Get the decks spinning with Behringer\'s DJ Controller CMD MICRO 2-deck control module. This compact deck controller is loaded with dual touch-sensitive platters, pitch controls, transport controls, and cue functions. You can control up to two independent decks from a single MICRO. The touch-sensitive platter gives you the familiar control and functionality of an authentic turntable. The MICRO\'s small size makes it perfect for throwing into a gig bag or backpack. And you can combine it with other CMD controllers to create a larger control surface. Take control of your DJ software with the Behringer DJ Controller CMD MICRO.
- A versatile 2-deck controller for your DJ needs
- Ultra portable for studio and live work
- Using multiple units together for more control
Behringer\'s DJ Controller CMD MICRO 2-deck control module gives you the control you need to spin music your way. Touch-sensitive platters reacts just like a turntable. Touch it on the top and the music stops. Nudge the side of the wheel and you get a change in playback speed. You get all the functionality you\'ve come to know and use with a turntable. Dual 45mm fader gives you detailed pitch and volume control. Cue controls let you set up two cue points on the fly. The Behringer DJ Controller CMD MICRO can control up to two decks. If you want dedicated platters for each deck, then just add more modules.
- USB MIDI 2-deck controller module for use with your favorite DJ and DAW softwares
- Dual touch-sensitive platter controls with 45mm faders for in-depth control of your music
- Each channel has its own cue and pitch controls
- Backlit controls are easy to see in the dark
- Bus-powered, class-compliant module is easy to take on the go
- Compatible with most popular DJ programs
- Includes voucher for Deckadance LE DJ software
| ESSENTIAL 4-CHANNEL DJ CONTROLLER
- Dive into four-deck DJing, with full control over your mix
- Pristine, punchy sound with high dynamic range
- Plug and play with our pro DJ software TRAKTOR PRO 3 included
- Spin on two decks with TRAKTOR DJ 2 for iPad and desktop
DO MORE WITH FOUR
Layer tracks. Go back-to-back. Hook up a mic and an MC. Keep a wildcard up your sleeve and drop it when the dancefloor needs it: TRAKTOR KONTROL S3 has everything you need to DJ across four decks. Step up your sets, and play with total freedom.
FOUR DECK DJING
If you’ve been DJing on two channels so far, doubling down on decks means way more freedom in your mix – like layering beats, firing off samples, or keeping a banger track parked on Deck C. Whether you’re throwing in acapellas or love a double drop, four decks make it happen.
SYSTEM REQUIREMENTS
macOS 10.12, 10.13, 10.14 (latest update), Intel Core i5, 4 GB RAM
Windows 10 version 1803 or later (64 Bit), Intel Core i5 or equivalent CPU, 4 GB RAM
SUPPORTED AUDIO FORMATS
MP3, WAV, AIFF, Audio-CD, FLAC, Ogg Vorbis, non-DRM AAC
GENERAL
Monitor with 1280 x 800 screen resolution, USB 2.0, 1 GB free disc space. An internet connection and a graphics card which supports OpenGL 2.1 or higher are required to download and activate TRAKTOR software. Once installed and activated, all products can be used offline.
SUPPORTED DRIVERS
Core Audio, WASAPI, ASIO, DirectSound
HARDWARE SPECIFICATIONS
| AUDIO |
|
| Channels: |
4 out / 2 in |
| Sample Rate / Resolution |
44kHz/48kHz – 24-bit |
|
|
| MAIN OUT (BALANCED - XLR) |
|
| Signal Level |
18.7 dBu |
| THD+N |
0.001% |
| Freq Resp |
+/- 0.1 dB |
| Channel Separation L/R |
|
| Digital Multimedia Player
- Tabletop format
- Supports MP3, AAC, WAV and AIFF, as well as the hi-res audio formats FLAC AAC up to 48kHz / 24-bit
- 206 mm Large jog wheel
- 7" (17.8 cm) Colour touch display
- Operates with the free "rekordbox" software or app
- Separate power supply for analog and digital audio circuits to prevent noise interference
- 8 Hot cues
- Beat Jump to jump 1, 2 or 4 beats forwards or backwards from the current playback position
- Pro DJ Link for controlling up to 4x XDJ-1000MK2 or laptops
- 1x RCA analog output
- 1x RCA coaxial output
- LAN connection
- 1x USB Type A
- 1x USB Type B
- Dimensions: 305 x 110 x 382.5 mm
- Weight: 3.7 kg
- Incl. power cord, LAN cable, audio cable, and user manual
|
Xone:4D is a unique DJ workstation combining a high quality analogue DJ mixer with extended software controller functionality. The 20-channel USB2 soundcard provides multiple routing options, enabling vast capabilities for live recording, sampling and playback. For the DJ who requires extended MIDI control of up to 4 software decks simultaneously, 4D is a luxurious hybrid controller to elevate your performance.
FEATURE SUMMARY
Mixer:
- 4 multi-input stereo channels
- Switchable phono or line input stages, RIAA preamps on 3 channels
- Soundcard output routing switches for each channel
- 3-band total kill EQ +6dB to off
- 2 FX sends, FX1 with pre/post selection
- 2 analogue VCF filters – low, band & high-pass, resonance, frequency and ‘on’ switch
- 2 stereo returns
- BPM LED display
- Headphone monitor (3.5mm and 1/4″ sockets) with mix/cue control
- Assignable LFO editable waveform
- Mic input on XLR with level control and 2-band EQ, routable directly to soundcard
USB 2.0 Soundcard:
- 20 channel 96 kHz/24-bit USB 2.0
- PC and Mac drivers
- 10 in/10 out (4 analogue + 1 digital stereo inputs and outputs)
- Soundcard inputs fed from mic, FX1, FX2, main mix or stereo channels 1-4 pre or post fade
MIDI Control:
- Total of 227 mappable MIDI messages can be sent from select mixer controls
- Shift mode function for double layer
- Compatible with any software that has MIDI assignable functions
- 105 MIDI controls, including dedicated MIDI sections containing:
- 8x60mm linear faders
- 16 detented rotary pots
- 50 switches
- 2 jog wheels
- 8 illuminated push switches
|
PERFORMANCE PAD-CONTROLLER
The Reloop NEON is a powerful pad controller for Serato DJ Pro that will elevate your performance to a whole new level.
EXTENSIVE SERATO SP6 SAMPLE CONTROLLER
Acting as the perfect support hardware for DVS users and controller DJs, the 8 ultra-low-latency and touch-sensitive RGB drum pads with aftertouch are perfect for triggering samples, cues, loops and effects. Coming in as the most extensive Serato SP6 sample controller on the market, the NEON also offers LED feedback for each sample slot.
PLUG-AND-PLAY PERFORMANCE TOOL
An extremely flat yet sturdy design makes NEON not only the ultimate plug-and-play performance tool, but also something that can also be easily stowed in any DJ bag and set-up for use in a matter of seconds.
SMART LINK FUNCTION
Taking inspiration from the game-changing RP-8000 turntables, you can also connect two NEON controllers via smart link function, saving precious USB ports while allowing you to push your performance further.
Reloop - Neon Facts
- Powerful Serato DJ drum pad modular controller
- Official Serato Accessory: plug-and-play with Serato DJ
- Dedicated Serato DJ SP-6 sampler control
- 4-deck control for Slicer, Cue and Loop
- Perfect addition for DVS users and controller DJs
- 8 touch-sensitive RGB performance drum pads
- A total of 8 intuitive performance modes (Sampler, Pad FX, Slicer, Looped Slicer, Cue, Flip, Hot Loops, Loop and Manual Loop)
- Supports brand new Flip mode: Create individual edits from a song 'on the fly' and trigger these sequences as Flip
- FX after touch control for multi-sensorial effect modulation
- Supports the brand-new Serato Flip extension pack
- The most extensive Serato SP6 sample controller on the market
- 5 different trigger variants per sample slot (One Shot, Toggle, Hold, Repeat Mode and Sync) with corresponding status LED for visual feedback
- Access to all 6 synchronizable sample slots in 4 banks
- Dedicated sample volume control (Master + Slot)
- Direct access to 6 selectable iZotope FX in Pad FX mode (Velocity Depth Control
- Slicer performance modes for slicing of your tracks
- 8 colour coded cue points per deck which can be triggered as roll
- Quick access to more than 8 storable loops and manual loop control
- 2 endless push encoders for volume control, track navigation, loop editing as well as loop Shift and loop roll function
- Censor, slip and sync functions for all decks can be selected directly with the controller
- Internal/relative mode for DVS users
- USB bus-powered
- Smart Link: Neon can be connected to each other via mini jack cable
- Works with every MIDI compatible DJ or studio software
- Sturdy construction, but still easily portable due to slim profile design
- Connections: mini USB, link port, Kensington
- Incl. USB cable, quick start guide and link cable (3.5 mm jack)
|
Reviews
There are no reviews yet.