POLK AUDIO RC80i 20-100 W/ch In-Ceiling speaker PAIR

1 x 8¨ Mineral Filed Polymer Cone
1 x 1¨ Soft Dome Tweeter in swivel
mount
Amplifier Power 20-100 W/ch
Impedance 8 Ohms
Sensitivity 90Db
Dimensions (cm) 27 x 9

• Frequency Range (-10 dB) : 34 Hz – 18 kHz In half space (in ceiling)
• Frequency Response (±3 dB) : 47 Hz – 16 kHz In half space (in ceiling)
• Coverage Pattern : 90° conical, broadband (Avg 1k - 16kHz) Average 1 kHz to 10 kHz
• Directivity Factor (Q) : 8.7 (1k - 16kHz)
• Directivity Index (DI) : 9.4 dB (1k - 16kHz)
• Long-Term System : 250 W (1000 W peak), 2 hrs
• Power Rating, IEC3 : 150 W (600 W peak), 100 hrs
• Sensitivity (2.83V@ 1m) : 94 dB measured half-space, 99 dB computed for competitive comparison
• Maximum SPL6 : 118 dB cont ave (124 dB peak)
• Crossover Network : 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF.
• Nominal Impedance : 8 ohms
• Transducer Low Frequency Driver : Kevlar reinforced cone, 50 mm (2 in) voice coil.
• Transducer High Frequency Driver : JBL 2412H-1 compression driver, 25 mm (1 in) voice coil.
• Input Connector : Removable locking connector with screw-down terminals. Max wire 12 AWG (2.5 mm2)
• Dimensions (H x W x D) : 366 x 366 mm (14.4 x 14.4 in) square baffle x depth from back of baffle of 223 mm (8.8 in) on 321C
• Net Weight : 16.0 lbs. (7.3 kg)
• Shipping Weight : 19.4 lbs. (8.8 kg)

1 x 6 ½ ¨ Mineral Filed Polymer Cone
2 x ¾ ¨ Soft Dome Tweeter
Amplifier Power 20-100 W/ch
Impedance 8 Ohms
Sensitivity 89dB
Dimensions (cm) 22 x 7
One Speaker with Dual Inputs

The JBL Control 26C is a coaxial 2-way ceiling installation speaker with a 6.5" woofer and .75" titanium-coated tweeter, featuring a high output, extended frequency reproduction, and a 110° coverage angle, designed in support of background or foreground music applications for hotels, casinos, bars, restaurants and theme park pavilions.

The Control 26C is a 16 Ohm speaker, equipped with a loop-thru output connector for parallel expansion and voiding the need for use of a distributed system, which, in conjunction with the speakers' wide coverage and high output, allows for fewer speakers to be installed to achieve a good sound, and lowers installation costs.

Key Features

� Coaxial 2-way 6.5" ceiling mount installation speaker with wide 110° coverage and high 150-Watt power handling
� High output, discreet and extended frequency response appropriate for foreground or background music in casinos, hotels, restaurants and theme parks
� Wide coverage allows for optimum performance with fewer speakers, reduces installation costs
� SonicGuard overload protection allows for higher operating levels, improved overall system reliability
� 16 Ohm impedance, loop-thru connector allows for parallel speaker connection and system expansion without using constant voltage distributed system
� Humidity resistant Woofer Cone and Surround, aluminum woofer voice coil former provides extra cooling for increased long-term power handling
� Ported enclosure for optimized low frequency reproduction
� All necessary installation materials supplied

Driver Complement
Mid/Woofer     1 - 6-1/2" Diameter (16.51cm)
Dynamic Balance polymer composite cone driver
Tweeter     1 - 3/4" Diameter (1.91cm)
Silk Dome Tweeter
Electrical
Overall Frequency Response     40Hz-20kHz
Lower -3dB Limit     60Hz
Upper -3dB Limit     20kHZ
Nominal Impedance     8 ohms
Recommended Amplifier Power     20-100 w/channel
Efficiency     89 dB
Dimensions
Overall Diameter     9-5/16“(23.65cm)
Cut-out Diameter     8-3/16“(20.80cm)
Mounting Depth
(assumes 1/2" [12.7mm] wall material)     3-3/8" (8.57cm)
Overall Depth     3-7/8" (9.84cm)
Shipping/Other      
Shipped As     each
Product Weight     3.25 lbs. (1.47kgs) each
Total Shipping Weight     5.00 lbs. (2.27kgs)