Content |
The Temblor T8 features an 8“, down-firing, glass-composite woofer which is powered by a Class AB amplifier that delivers 200 watts of power. It has a round, front-firing acoustic port, 1/4" TRS and RCA main inputs, and 1/4" TRS and RCA pass-through outputs to connect your top speakers.
The speaker also includes a continuously variable low-pass filter that can be set between 50 Hz to 130 Hz, and also has a switchable high-pass filter that removes content below 80 Hz from the full-range signal sent to your satellite speakers, allowing you to create a seamless crossover transition.
8-inch, downward-firing, glass-composite low-frequency transducer Round, rear-firing, bass-reflex acoustic port Polarity invert assures the sub is phase aligned with top speakers Internal damping and heat sink Integrated rubber feet for stable placement Technical SpecificationsInputs | 2x Balanced 1/4" TRS
2x Unbalanced RCA | Outputs | 2x Balanced ¼" TRS (full range with 80 Hz HPF option) 2x Unbalanced RCA (full range with 80 Hz HPF option) | Frequency Response | 30 Hz - 200 Hz | Low Pass Filter | 50 - 130 Hz (variable) | Signal to Noise Ratio | >98 dB (A weighted) | THD | 0.05% | Amplifier Power | 200 W peak, 100 W RMS | Power Consumption | 120 W | Amplifier Type | Class AB | Max Peak SPL | 104 dB at 1 m | Woofer | 8" glass-composite, downward-firing | Port | Rear-firing bass reflex (round) | Input Gain Adjustment | -30 to +6 dB | Polarity Reverse | 0 or 180° | Low Pass Filter | 50 Hz to 130 Hz | High Pass Filter | On/off | Protection | RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
External mains fuse
| Power | 100-120 V ~50/60 Hz or 220-240 V ~50/60 Hz | Cabinet | Vinyl-laminated MDF | Dimensions | 10.2 x 12.6 x 11.0" (260 x 320 280 mm) | Weight |
21.2 lb (9.6 kg)
|
|
Genelec 7260A Active DSP Subwoofer brings the flexibility and accuracy of room response equalization to an entirely new level. This powerful and precise low frequency monitoring solution is designed for modern 6.1 or 5.1 multi-channel systems as well as traditional stereo applications.
With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile digital bass management system, the 7260A adapts to all low frequency monitoring situations. The amplifier unit is integrated into the enclosure containing active DSP crossover filters, driver overload protection circuits and power amplifiers.
The built-in bass management system supports eight input and output channels (four XLR connectors) for AES/EBU formatted digital audio. The main channels crossover frequency can be adjusted between 50-100 Hz.The LFE channel input (input 4) features an adjustable 50 - 120 Hz low-pass filter and a 0/+10 dB sensitivity switch.
The Genelec Loudspeaker Manager (GLMTM) control network and software enhances further the performance of the 7260A: it features adjustment of levels, distance delays, phase and flexible room response improvement equalization with the reliable and robust AutoCalTM automated calibration system via the GLMTM control network.
The Genelec Laminar Spiral EnclosureTM (LSETM) bass reflex enclosure is made of sheet metal rolled into a spiral shape and clamped between sturdy MDF side panels.
This novel construction technique allows for a long reflex tube to be mounted into a small cabinet, which provides as a result excellent laminar flow characteristics with minimal turbulence noise.
| 108 dB | | Main 19 - 100 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB) | | 0 to -270° (90° steps) | | 10“ | | 120 W | | H x W x D 527 x 462 x 363 mm | | 27 Kg (59 lb) | | 4 x XLR digital in
4 x XLR digital out
(8 channels AES/EBU) |
|
Product details
Woofer: 10-inch Paper Cone
Frequency response: 20Hz – 40Hz ~ 120Hz
Crossover frequency: 40-120Hz adjustable
Lf - Amplifier Power: 300W
Signal LF: >90dB
THD + N @ Rated Power LF: 0.08%
Inputs: 2x XLR,2x TRS,
2x RCA Connectors,
S/PDIF Connector
for digital signal
Outputs: 2x XLR, 2x TRS
2x RCA Connectors, S/PDIF - RCA jack for digital signal thru
Input Impedance: 20 kOhm balanced, 10 kOhm unbalanced
Input Sensitivity: +4 dBu (Balanced), -10dBV (unbalanced)
Phase reverse: 0° /180° switch
Available colors: Red, Black
Gross Weight: 22.4kg / 49.2lb
Net weight: 18.7kg / 41.1lb
Gross Dimensions: L500 x W523 x H523 mm
L19.68x W20.59 x H20.59 in
Net Dimensions: L374 x W368 x H383 mm
L14.72 x W14.49 x H15.08 in
|
Genelec 7070A Active Subwoofer is powerful and precise bass monitoring tool for modern 6.1 or 5.1 channel Surround Sound or traditional stereo systems. With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile bass management systems, it can be adapted to all low frequency monitoring situations.
The amplifier unit integrated into the cabinet contains active crossover filters, driver overload protection circuits and power amplifiers.
The in-built bass management unit has six signal input and output channels, summed signal output connectors and LFE input equipped with a selectable 85/120 Hz lowpass filter and a 0 / +10dB LFE sensitivity switch.
| 112 dB | | Main 19 - 85 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB) | | 0 to -270° (90° steps) | | 12" Active | | 250 W | | H x W x D 625 x 555 x 490 mm | | 50 Kg (110 lb) | | 6.1 XLR analog in
6 x XLR analog out
1 x XLR Link out |
|
- 8' bass-reflex powered subwoofer delivers low frequencies down to 22Hz
- 22Hz - 150Hz frequency response
- High-power 150W amplifier exclusively designed for low frequencies
- LOW CUT switch, LOW CUT control (80-120Hz) HIGH CUT control (80-120 Hz)
- PHASE switch allow users to set up a subwoofer system with simple connections and no additional equipment
- XLR and TRS phone for outputs and XLR for L and R and EXT SUB
Type |
Studio monitor subwoofer |
Woofer |
8'' |
Midrange |
- |
Tweeter |
- |
Amplifiers Power |
150W |
Input/Output Plugs |
XLR3-31 type (balanced) x2, PHONE (balanced) x2 / Out: XLR3-32 type (balanced) x2 (L&R) |
Frequency Response |
22Hz - 160Hz |
Εqualizer |
Yes (Low cut switch) |
Dimensions (W x H x D) |
300mmx350mmx389mm |
Weight |
12.5kg |
|
Genelec 7071A Active Subwoofer is powerful and precise bass monitoring tool for modern 6.1 or 5.1 channel Surround Sound or traditional stereo systems. With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile bass management systems, it can be adapted to all low frequency monitoring situations.
The amplifier unit integrated into the cabinet contains active crossover filters, driver overload protection circuits and power amplifiers.
The in-built bass management unit has six signal input and output channels, summed signal output connectors and LFE input equipped with a selectable 85/120 Hz lowpass filter and a 0 / +10dB LFE sensitivity switch.
| 118 dB | | Main 19 - 85 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB) | | 0 to -270° (90° steps) | | 2 x 12“ | | 500 W | | H x W x D 755 x 803 x 490 mm | | 81 Kg (178 lb) | | 6.1 XLR analog in
6 x XLR analog out
1 x XLR Link out |
|
Reviews
There are no reviews yet.