Content | Permanently polarized condenser capsule, omni-directional polar pattern, ideal for MCs or worship leader, backplate electret condenser transducer type.
Overview
- Permanently polarized condenser capsule.
- Omni-directional polar pattern.
- Ideal for MCs or worship leaders.
Technical Specifications
- Transducer type: backplate electret condenser
- Polar pattern: omnidirectional
- Frequency response: 80 Hz - 16 KHz
- Sensitivity: 52 dB +-3 dB
- Maximum SPL for 1% THD: 128 dB
- Nominal Impedance: 680 ohm
- Reccommended Load Impedance: 3000 ohm
- Power Supply: 1.5-7V DC
- Connectors: 3.5mm threaded mini-jack
|
Miniaturized lavalier condenser microphone for wireless or wired applications.
The ADX10 is a miniaturized condenser microphone designed for lavaliere applications such as speech, presentation and theatrical production. The ADX10 has the ability to accurately capture and reproduce vocals from a comfortable distance of 4“- 8“. This mic is clear, resistant to feedback and easy to use.
Designed with a uniformly controlled cardioid polar pattern, the ADX10 helps to isolate the area or section being miked from other vocals or instruments on stage. The ADX10 has a smooth, accurate frequency range of 50 Hz - 18 kHz. This mic is lightweight, low profile and has a natural sound with exceptional sound response.
Primarily for use with the Audix RAD360 Wireless System, the ADX10 includes a tie-clip and a 3' attached cable terminating to a mini-XLRf connector.
MODEL VARIATIONS:
ADX10P - For hard wired application. Includes an 8' cable terminating to a mini-XLRf connector tie clip, external windscreen and a phantom power adapter module. 9 - 48 V phantom power required.
Type | Pre-polarized Condenser | Polar Pattern | Cardioid | Frequency Response | 50Hz - 18kHz | Impedance | 250 Ohms | Sensitivity | 5 mV/Pa @1k |
|
The Shure MX150 Subminiature Lavalier Microphone is a subminiature, multi-positioned clip-on microphone well suited for broadcast operation, sermons, presentations, public address and much more. This version includes the RK100PK XLR in-line preamplifier for use with standard XLR connections in mixers, recorders, mic-pres, etc. Shure's CommShield technology makes the MX150 impervious to noise caused by cell phones, PDAs, WiFi and other RFI. The microphone ships with a snap-fit foam windscreen and multi-position tie clip with an integrated cable management system that minimizes noise without increasing cable strain and tension. Omnidirectional polar pattern and wired XLR connection CommShield Technology guards against interference from cellular RF devices and digital bodypack transmitters Matte black, sleek design for inconspicuous placement Multi-position tie clip allows for a variety of placement options and features an integrated cable management system for convenient cable dress with minimal handling noise Kevlar-reinforced soft-flex cable design further reduces handling noise while providing superior flexibility for routing and placement User-changeable equalization caps for response shaping (omnidirectional only) Snap-fit, concise windscreen provides protection from plosives and wind noise with minimal visibility Legendary Shure quality, ruggedness, and reliability Transducer | Electret condenser | Polar Pattern | Omnidirectional | Frequency Response | 20 to 20,000Hz | Output Impedance | 165.0 Ω | Sensitivity | -34.5 dBV/Pa (19.0 mV) | Max Input Sound Level (SPL) | 1000 Ω load: 125.0 dB SPL; 2500 Ω load: 130.0 dB SPL | Signal-to-Noise Ratio | 59.5 dB | Dynamic Range | @1kHz 1000 Ω: 90.5 dB SPL; 2500 Ω load: 95.5 dB SPL | Self Noise | 34.5 dB (equivalent SPL, A-weighted, typical) | Clipping Level | 1000 Ω load: 1.0 dBv; 2500 Ω load: -4.5 dBv | Operating Temperature | Operating: 0 to 135°F (-18 to 57°C) Storage: -20 to 165°F (-29 to 74°C) | Polarity | XLR: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 | Power Requirements | 11-52VDC phantom power (IEC-61938), | Dimensions (LxDiameter) | Length: 5' (1.52m) Diameter: 0.23" (5.8mm) | Weight | 4.3 oz (121 g) |
|
All models include foam windscreens, swiveling lapel clip, dual tie clip, magnet mount, and mini mount
Subminiature size (5.8 mm diameter x 11 mm height)
Electret condenser cartridge
Omnidirectional pattern
One termination: 4-pin mini connector (fits directly into Shure wireless transmitters)
Two sensitivities available:
--Standard: -40 dBV/Pa (for speech applications)
--Reduced: -50 dBV/Pa (10 dB more headroom for theater applications)
Interchangeable equalization caps for optimal clarity and response:
--Silver mesh cap provides a 4 dB boost in the 8-18 kHz range - typically used in applications that require a microphone to be head-mounted
--Gold mesh cap provides a 10 dB boost centered at 12 kHz - typically used in applications that require a chest-worn microphone
Black, beige, and white models are available
All models include magnet mount, lapel clip, dual tie clip, pin mount, and two foam windscreens
Frequency response: 20-20,000 Hz
|
The e 608 is a super-cardioid microphone ideal for almost invisible clip-miking
of woodwind (except certain Flutes), brass and drums. A newly developed clamp
and gooseneck mounting enables the capsule to be positioned close to the signal
source for high realism and high-level output.
Features
Rugged reinforced glass-fibre body
Shock-mounted capsule provides low sensitivity to impact and handling noise
Hum compensating coil
Extremely robust connection cable with XLR connector
Delivery Includes
1 e 608
1 microphone clip
1 pouch
Technical Data
Frequency Response 40.....16000 Hz
Sensitivity in free field, no load (1kHz) 0,8 mV/Pa
Min. terminating impedance 1000 Ohm
Dimensions d 17 x 185 mm
Weight w/o cable 20 g
|
Low-profile, cost efficient clip-on microphone for applications including houses of worship, lecturers, etc. Connects to AKG bodypack transmitters. The CK 99 L provides a natural sound, with a slight rise above 10 kHz for added clarity. Its cardioid polar pattern and bass rolloff combine to suppress unwanted ambient noise. Hide and speak for house-of-worship, conference and theater applications The CK99 L is a condenser lavalier microphone with cardioid polar pattern. It provides a natural sound, with a slight rise above 10kHz for added clarity, perfect for applications in houses of worship, lectures and theaters. Thanks to its small housing and the included durable metal clip, it can be inconspicuously and securely mounted on jackets and costumes. The CK99 L provides a professional three-pin mini XLR connector that fits the body pack transmitters of all AKG wireless microphone systems. Cardioid polar pattern eliminates noise from the rear 125° pickup angle for inexperienced or very vivacious talkers Small housing and durable metal clip for inconspicuous, secure mounting Technical Specification General | Audio Frequency bandwidth | 15 to 18000 Hz | Sensitivity | 8.8 mV/Pa | Equivalent Noise Level | 34 dB-A | Signal to Noise | 60 dB-A | Electrical Impedance | 200 Ohms | Recommended Load Impedance | 2000 Ohms | | Polar Patterns | Cardioid | | | Powering Interface | Voltage | 1.5 to 10 V | Current | 2 mA | | Audio Output | Type | Mini XLR | Gender | Female | Contacts | 3-pin | | Design | | Dimensions / Weight | Height | 23 mm | Diameter | 8 mm | Net Weight | 2.5 g | |
|
Reviews
There are no reviews yet.