NEXT is a series of speakers which reaches the highest standards of its class. All of the components have been designed to obtain an exceptional sound and performance quality. Realised in injected Polypropylene, the robust cabinet has been designed to handle any type of stress and is both light and easy to transport. The woofer, […]
NEXT is a series of speakers which reaches the highest standards of its class. All of the components have been designed to obtain an exceptional sound and performance quality. Realised in injected Polypropylene, the robust cabinet has been designed to handle any type of stress and is both light and easy to transport. The woofer, which features a die-cast aluminium basket has an excellent sound level due to the use of the very light neodymium magnet (NEXT12HP4/HP8/HBA and NEXT15HP4/HP8/HBA). All models feature an exclusive 90° x 60°constant coverage horn which gives a precise control and constant dispersion in the high frequencies, which are supplied by a 1” compression driver, giving a clear, clean and well defi ned sound. The dedicated 12dB/oct crossover, which features a PTC electronic protection, ensures the correct control of the sound. The active versions are bi-amplifi ed systems which supply the correct power levels to the high and low frequency transducers, reducing distortion and the power compression effect to a minimum. The amplifi ers feature thermal, DC and short circuit protection as well as sub-sonic fi lters, soft start function and RF noise fi lters. The amplifi ed NEXT speakers include a pre-amplifi er with three separate balanced inputs, which allow the connection of both microphones and instruments without the need of an external mixer. The mixed signal can then be linked out into other NEXT speakers with the balance XLR output. A two-band equaliser, separate line and mic volume controls and ground lift switch complete the control panel. The ergonomic rubber handles are comfortable and the stacking system easy to use. M8 fl ying points are included for suspended installation. The trapezoidal design allows the system to be arrayed. The speakers can be used vertically or as a fl oor monitor with the optional adapter (KPTNX05 adapter available for the NEXT12 and 15). Adjustable metal supports and eyebolts (AC169B) allow the system to be suspended. Resistant TNT covers are available for the whole series.
System type : 2-way processed active enclosure
Amplifier Continuous Power : 150 W + 50 W bi-amp
Input Impedance : LINE: 20 kohm balanced, 10 kohm unbalanced
MIC: 2 kohm balanced, 1 kohm unbalanced
Frequency response : 60 Hz – 20 kHz
Input Sensitivity : LINE: 0 dBu / 0.775 V
MIC: max -42 dBu
Maximum (peak) Output : 121 dB @ 1m
Low Frequency Device : 8” woofer
Crossover Frequency : 3000Hz
Low frequency equalizer : 100 Hz +9 dB,-9 dB shelving
High Frequency Equalizer : 8 kHz +6 dB,-6 dB shelving
Monitor Taper : 45°
Power Supply : 230 V 50 Hz o 117 VAC 60 Hz
Maximum Power Consumption : 280 VA
Cooling : Natural convection (safety protection 65°)
Connectors : IN: combo, XLR F
LINK: XLR M
Construction : Injection reinforced hi-density polypropylene
Mounting Pole : 1 x bottom
Flying System : 2 x M8, top
Weight : 9.7 kg(21.388lb )
Dimensions (W x H x D) : 28 x 41 x 24.5 cm
Controls : mic level, line level, low eq., hi eq., gnd. lift
Weight
9.70 kg
Reviews
There are no reviews yet.
Be the first to review “PROEL NEXT-8FBA Speaker 150 W + 50 W bi-amp” Cancel reply
NEXT is a series of speakers which reaches the highest standards of its class. All of the components have been designed to obtain an exceptional sound and performance quality. Realised in injected Polypropylene, the robust cabinet has been designed to handle any type of stress and is both light and easy to transport. The woofer, which features a die-cast aluminium basket has an excellent sound level due to the use of the very light neodymium magnet (NEXT12HP4/HP8/HBA and NEXT15HP4/HP8/HBA). All models feature an exclusive 90° x 60°constant coverage horn which gives a precise control and constant dispersion in the high frequencies, which are supplied by a 1” compression driver, giving a clear, clean and well defi ned sound. The dedicated 12dB/oct crossover, which features a PTC electronic protection, ensures the correct control of the sound. The active versions are bi-amplifi ed systems which supply the correct power levels to the high and low frequency transducers, reducing distortion and the power compression effect to a minimum. The amplifi ers feature thermal, DC and short circuit protection as well as sub-sonic fi lters, soft start function and RF noise fi lters. The amplifi ed NEXT speakers include a pre-amplifi er with three separate balanced inputs, which allow the connection of both microphones and instruments without the need of an external mixer. The mixed signal can then be linked out into other NEXT speakers with the balance XLR output. A two-band equaliser, separate line and mic volume controls and ground lift switch complete the control panel. The ergonomic rubber handles are comfortable and the stacking system easy to use. M8 fl ying points are included for suspended installation. The trapezoidal design allows the system to be arrayed. The speakers can be used vertically or as a fl oor monitor with the optional adapter (KPTNX05 adapter available for the NEXT12 and 15). Adjustable metal supports and eyebolts (AC169B) allow the system to be suspended. Resistant TNT covers are available for the whole series.
System type : 2-way processed active enclosure
Amplifier Continuous Power : 150 W + 50 W bi-amp
Input Impedance : LINE: 20 kohm balanced, 10 kohm unbalanced
MIC: 2 kohm balanced, 1 kohm unbalanced
Frequency response : 60 Hz - 20 kHz
Input Sensitivity : LINE: 0 dBu / 0.775 V
MIC: max -42 dBu
Maximum (peak) Output : 121 dB @ 1m
Low Frequency Device : 8'' woofer
Crossover Frequency : 3000Hz
Low frequency equalizer : 100 Hz +9 dB,-9 dB shelving
High Frequency Equalizer : 8 kHz +6 dB,-6 dB shelving
Monitor Taper : 45°
Power Supply : 230 V 50 Hz o 117 VAC 60 Hz
Maximum Power Consumption : 280 VA
Cooling : Natural convection (safety protection 65°)
Connectors : IN: combo, XLR F
LINK: XLR M
Construction : Injection reinforced hi-density polypropylene
Mounting Pole : 1 x bottom
Flying System : 2 x M8, top
Weight : 9.7 kg(21.388lb )
Dimensions (W x H x D) : 28 x 41 x 24.5 cm
Controls : mic level, line level, low eq., hi eq., gnd. lift
Features
- 2-way, full-range system
– 8″ bass loudspeaker
– Compression driver
– Asymmetric enclosure design for stage monitor use
– Built-in rigging points
– Stand mountable
The Action 8 is a compact 2-way passive full-range loudspeaker that utilizes a 8” low frequency transducer and a full compression driver. The multi-angle cabinet is constructed of Birch plywood protected by an enviormentally friendly ISO-flex black paint finish. A rear located handle and a robust steel grille are provided. A 35 mm tripod socket allows for stand mounting.
Technical Data
RMS Power Handling
150 W
Peak Power Handling
600 W
Frequency Range (-10 dB)
60 Hz-20 kHz
Nominal Impedance
8 ohms
On-axis Sensitivity 1 W / 1 m
92 dB SPL
Rated Peak SPL at 1 m
120 dB
Dispersion
80º x 80º
Enclosure Material
Birch Plywood
Color/Finish
Black/ISO-Flex Paint
Connectors
2 x NL4 Speakon
Dimensions (H x W x D)
47.5 x 27.9 x 25.5 cm
18.7 x 11 x 10 in
Weight
8.4 kg (18.5 lb)
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
Processed Active Monitor
200W+ 50W RMS - 124dB SPL
200mm (8’’) custom woofer with improved efficiency and linearity
200Wrms class D amplifier for LF and 50Wrms for HF.
Low noise toroidal transformer power supply
On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
2 DSP preset for maximum acoustical flexibility
Available in white colour 8AW
Code:
37689 / 37906 White
Configuration:
2 way
Built-in amplifier LF/HF:
200/50 W RMS
Built-in amplifier peak LF/HF:
400/100 W
Frequency response:
60Hz - 20KHz -6dB
Low Frequency woofer:
8 - 1.7 coil inch
High Frequency driver:
1 -1 coil inch
Maximum SPL cont/peak:
120/124 dB
Dispersion:
90° x 60° HxV
Input impedance:
22 Kohm
Crossover Frequency:
2.5 KHz
AC Power requirements:
160 VA
Input connector:
XLR - jack with loop
Power cord:
5 / 16.4 m/ft
Net Dimension (WxHxD):
255x415x245 - 10.03x16.33x9.64 mm/inch
Net Weight:
8.2 / 18.7 Kg/lb
Transport Dimension (WxHxD):
330x480x320 - 12.99x18.89x12.59 mm/inch
Transport Weight:
9.7 / 21.38 Kg/lb
PROEL V-8-PLUS 8“
Specifications :
System type : 2-way vented enclosure
High Frequency Device :1” neodimyium compression driver
Low Frequency Device :8” woofer with 1.5” voice coil
Angular Coverage : 90° H x 60° V
Total peak power : 400 W
HF Amplifier Continuous Power :50 W Class AB
LF Amplifier Continuous Power : 150 W Class D
Power Supply :SMPS
Processing Analog
Frequency Response : 70 Hz - 20 kHz
Max SPL :121 dB
Connectors IN: COMBO, LINK: XLR M
Controls LEVEL, LINE/MIC selector, LOW EQ, HIGH EQ, GND LIFT, FRONT LED selector
Monitor Taper : 45°
Flying System : 4 x M8 - top/bottom
Construction : Polypropylene
Cabinet Colour : Black
Handles : 1 x top
Mounting Pole : 1 x bottom
Power Supply : 230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE selector
More Specs
2-way bi-amped loudspeaker system
1” NEODYMIUM compression driver
Constant coverage 90° x 60° horn
High-excursion 8” woofer with 1.5” VC
400 W Class D power amplifier with SMPS
Integrated active processor with dual LIMITER circuit
The LD Systems SAT82AG² is an active installation monitor, which provides a convincing performance on a PC or laptop and as a home studio monitor.
The compact 2-way bass reflex design is equipped with an 8" custom-made woofer and a 1" compression driver which are driven by an 80 Watt Class AB power amplifier. The input is a combo socket; an XLR socket is used to loop through the signal. With a frequency response of 50 Hz - 20 kHz and 114 dB maximum sound pressure, the SAT82AG² produces a balanced sound with high dynamics. The monitor features protection circuits for the tweeter against overcurrent, and a switchable power saving mode that automatically switches to standby if there is no signal for 3 minutes.
The cabinet of the SAT82G² is made of 12mm MDF with M6 flight points and is available in black or white with a durable textured paint finish. A versatile mounting bracket is included; a universal joint mount is available as an accessory.
Product Type: installation monitor
Type: active
Woofer Size: 8“
Woofer Size: 203.2 mm
Woofer Magnet: ferrite
Woofer Brand: custom-made
HF Driver Size: 1“
HF Driver Size: 25 mm
HF Driver Magnet: ferrite
HF Driver Brand: custom-made
Amplifier (A): Class A/B
Dispersion Angle (H x V): 60° x 60°
Power Output (RMS): 80 W
Frequency Response: 50 Hz - 20,000 Hz
Max SPL: 114 dB
Protection: overcurrent, HF drivers
Controls: volume, power switch (on/off), power mode (on/auto)
Indicators: Power, Overload
Line Input Connectors: 6.3 mm TRS, XLR
Line Output Connectors: XLR
Power Supply: transformer
Operating Voltage: 220 V AC - 240 V AC, 50 - 60 Hz
LD Systems STINGER 8 A G3
Active 8" 2-way bass-reflex PA speaker
2-way active 8” bass reflex PA speaker
High-efficiency 300 watts RMS digital power stage and 129 dB max. SPL
Multi-purpose design for fullrange, satellite and monitor applications
Application presets for quick frequency response contouring
BEM optimized HF waveguide for uniform coverage
8” custom woofer and BMS compression driver
DynX® DSP technology for distortion-free performance
2 line/mic input channels with individual gain controls plus mono mix out
12 mm birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
Shock-resistant front grill provides maximum speaker protection
36 mm Dual-Tilt pole receptacle for 0° or 5° mounting angles
Large selection of smart installation and transport accessories
STINGER 8 A G3
Engineered for rock-solid reliability day in, day out this active 2-way system is a truly professional performer. With its multi-purpose bass reflex construction and carefully contoured, user-friendly presets it is equally suitable for fullrange, satellite or floor monitor applications. The Stinger® 8 A G3 is powered by high efficiency Class D amplification with a hefty 300 watts RMS output. It drives a custom designed 8” woofer and BMS compression driver delivering a punchy low end and smooth, crisp highs. The HF waveguide has been designed using BEM, the numerical modeling of sound radiation and propagation. It reduces floor and ceiling reflections, effectively eliminates side lobes and achieves a controlled uniform coverage pattern. The Stinger® 8 A G3 incorporates LD Systemsʼ proprietary DynX® DSP technology to ensure top-level performance with maximum clarity and punch at all times. Processing includes crossover and multiband limiter functions for accurate time alignment and pristine, distortion-free audio. Designed to be a real workhorse throughout, the enclosure is made of rigid birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, Dual-Tilt pole receptacle, multiple suspension points and ergonomic handles the Stinger® 8 A G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
Product type
PA loudspeaker
Type
active
Low/mid driver dimensions
8 "
Woofer Size
203.2 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil
2 "
Woofer voice coil (mm)
50.8 mm
Horn
BEM optimized CD Horn
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
BMS
HF driver voice coil
1 "
HF Driver Voice Coil
25.4 mm
Amplifier
Class D
Dispersion (H x V)
90 x 50 °
RMS
300 W
Peak power
600 W
Frequency response
70 - 20000 Hz
Max. SPL (peak)
125 dB
Protection circuits
Multiband limiter , over voltage , over-current , thermal overload
Input sensitivity
-9 dBu
Controls
2 x gain , 2 x Mic/Line , mode
Indicators
limit , Mic , mode , on , protect (protection circuit engaged) , signal
Line inputs
2
Line input connectors
6.3 mm Jack , XLR
Line outputs
1
Line output connectors
XLR
Operating voltage
100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching) , Switching Power Supply
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
User's manual
Reviews
There are no reviews yet.