| Content |
NEXT is a series of speakers which reaches the highest standards of its class. All of the components have been designed to obtain an exceptional sound and performance quality. Realised in injected Polypropylene, the robust cabinet has been designed to handle any type of stress and is both light and easy to transport. The woofer, which features a die-cast aluminium basket has an excellent sound level due to the use of the very light neodymium magnet (NEXT12HP4/HP8/HBA and NEXT15HP4/HP8/HBA). All models feature an exclusive 90° x 60°constant coverage horn which gives a precise control and constant dispersion in the high frequencies, which are supplied by a 1” compression driver, giving a clear, clean and well defi ned sound. The dedicated 12dB/oct crossover, which features a PTC electronic protection, ensures the correct control of the sound. The active versions are bi-amplifi ed systems which supply the correct power levels to the high and low frequency transducers, reducing distortion and the power compression effect to a minimum. The amplifi ers feature thermal, DC and short circuit protection as well as sub-sonic fi lters, soft start function and RF noise fi lters. The amplifi ed NEXT speakers include a pre-amplifi er with three separate balanced inputs, which allow the connection of both microphones and instruments without the need of an external mixer. The mixed signal can then be linked out into other NEXT speakers with the balance XLR output. A two-band equaliser, separate line and mic volume controls and ground lift switch complete the control panel. The ergonomic rubber handles are comfortable and the stacking system easy to use. M8 fl ying points are included for suspended installation. The trapezoidal design allows the system to be arrayed. The speakers can be used vertically or as a fl oor monitor with the optional adapter (KPTNX05 adapter available for the NEXT12 and 15). Adjustable metal supports and eyebolts (AC169B) allow the system to be suspended. Resistant TNT covers are available for the whole series.
System type : 2-way processed active enclosure
Amplifier Continuous Power : 150 W + 50 W bi-amp
Input Impedance : LINE: 20 kohm balanced, 10 kohm unbalanced
MIC: 2 kohm balanced, 1 kohm unbalanced
Frequency response : 60 Hz - 20 kHz
Input Sensitivity : LINE: 0 dBu / 0.775 V
MIC: max -42 dBu
Maximum (peak) Output : 121 dB @ 1m
Low Frequency Device : 8'' woofer
Crossover Frequency : 3000Hz
Low frequency equalizer : 100 Hz +9 dB,-9 dB shelving
High Frequency Equalizer : 8 kHz +6 dB,-6 dB shelving
Monitor Taper : 45°
Power Supply : 230 V 50 Hz o 117 VAC 60 Hz
Maximum Power Consumption : 280 VA
Cooling : Natural convection (safety protection 65°)
Connectors : IN: combo, XLR F
LINK: XLR M
Construction : Injection reinforced hi-density polypropylene
Mounting Pole : 1 x bottom
Flying System : 2 x M8, top
Weight : 9.7 kg(21.388lb )
Dimensions (W x H x D) : 28 x 41 x 24.5 cm
Controls : mic level, line level, low eq., hi eq., gnd. lift
|
The D 8A is the active version of the D 8 offering integrated Class-D power amplifiers, an electronic crossover and loudspeaker equalization.
The D 8A is ideal when combined with active subwoofers for the creation of very compact, active 3-way high-powered systems. For the low- and high frequency ranges, 2x 200 W RMS are available. The maximum overall amplifier output comes to 800 W. The frequency-range is 56 Hz - 20 kHz and the max. SPL is 123 dB / 1m)
The Line input is implemented as an XLR/jack combo socket. In addition an XLR microphone input with a separate level control is available. For operation with powered subwoofers, a switchable low-cut filter is provided.
The extensive range of optional accessories allows virtually unlimited use in fixed installations or flown configurations.
Cabinet Fullrange
Configuration Powered 2-Way
Components 8" / 1“
Rated Power RMS 200 W LF / 200 W HF
Max. Amplifier Output Capability 400 W LF / 400 W HF
max. SPL / 1m 123 dB
Frequency Range (-10 dB) 56 Hz - 20 kHz
Radiation-Pattern H x V 90° x 90°
Dimensions mm (W x H x D) 282 x 442 x 259
Weight 9 kg
| - PS 08 but active
- Amplifier: 120Wrms (240 Music)
- Balanced MIC + LINE input with level control
- Balanced LINE outputs
- Treble + Bass Master volume control +
Technical Data
- Amplifier power: 120Wrms / 240Wmusic
- Signal / noise rate: 85dB
- Micro input: 1.5mV @ 20kΩ
- Line input: 1V @ 20kΩ
- Tone controls: +/- 12dB @ 100Hz and 10kHz
- Frequency response: 70 - 20,000Hz
- Woofer: 8 "woofer (20cm)
- Compression Driver / Horn: 1 "voice coil
- Nominal dispersion: 90 ° x 60 ° (HxV)
- Mains Input: 115Vac / 60Hz - 230V AC / 50Hz
- Fuse: 250V 3.15A slow blow (20mm glass)
- Dimensions: 402 x 294 x 220 mm
- Weight: 8kg |
Dedicated PA speaker system for fixed installations 2-way bass-reflex system for powerful bass 20 cm woofer (8“) and 2.5 cm dome tweeter (1“) White or titanium plastic housing (ABS) with metal grille Trapezoidal cabinet for corner installation Movable mounting bracket for ceiling or wall installation Ideal for PA applications in restaurants, bars, discos, shops, conferences, etc. |
Dedicated PA speaker system for fixed installations 2-way bass-reflex system for powerful bass 20 cm woofer (8“) and 2.5 cm dome tweeter (1“) White or titanium plastic housing (ABS) with metal grille Trapezoidal cabinet for corner installation Movable mounting bracket for ceiling or wall installation Ideal for PA applications in restaurants, bars, discos, shops, conferences, etc. | Features
- Compact and powerful performance
- 1000 Watt peak power Class-D amplifier module
- Easily selected contours for commonly-used applications
- Advanced DSP with Intrinsic Correction™ for superior sound quality and speaker protection
- Directivity Matched Transition™ (DMT) for consistent frequency response across the entire coverage area
- Light weight and highly portable
- Professional appearance looks great in any application
- Use for main PA, stage monitor, or instrument amplifier
- 35 mm pole socket
- Optional yoke, tote, and outdoor cover accessories
- Complete EASE and CAD information available online
| Model |
CP8 |
| Configuration |
Two-way active loudspeaker |
| LF Transducer: |
8 in (203 mm), cone |
| HF Transducer: |
1.4 in (35.6 mm) compression driver |
| Frequency Response (-6 dB) |
56 - 20 kHz |
| Frequency Range (-10 dB) |
53 - 20 kHz |
| Nominal Coverage Angle: |
90° Axisymetric |
| Maximum Rated SPL1: |
124 dB |
| Amplifier: |
Class D
Peak: 800 W (LF), 200 W (HF) |
| Controls: |
Power
2 x Gain
Mic Boost Push Switch
6-way Contour Selection Switch |
| Indicators: |
Power LED
2 x Input Signal LED
Input B MIC selected LED
Limiter active LED |
| Connectors: |
2 x locking XLR/F ¼” combo (Line Input and Mic/Line input)
1 x 3.5 mm TRS (Stereo Input)
1 x XLR/M (Mix Output)
1 x IEC power connector |
| AC Power Input: |
Universal power supply 100 – 240 VAC, 50 – 60 Hz |
| AC Power Consumption (1/8th Power): |
100 VAC, 0.75A - 240VAC 0.31A |
| Enclosure Material: |
Polypropylene |
| Attachment Points: |
M8 threaded insert |
| Color: |
Black (RAL 9011) |
| Grille: |
18 Gauge powder-coated steel |
| Dimensions (HxWxD): |
16.2 x 10.7 x 10.1 in
411 x 273 x 256 mm |
| Net Weight: |
21.0 lbs (9.5 kg) |
| Shipping Weight: |
25.5 lbs (11.4 kg) |
| Regulatory: |
EMC, UL, CB |
| Optional Accessories: |
CP8 Tote, CP8 Outdoor Cover, CP8 Yoke |
|
Reviews
There are no reviews yet.