ROBE FOG 800 FT-800W FOG MACHINE

The FOG 800 FT is the smallest fogger in the Robe?s range of smoke machines.
Its compact size and dimensions are ideal for clubs, discotheques and small
venues. A fluid consumption is as low as 50ml per minute thanks to the new high
efficiency heater technology. A heat-up time is less than 3 minutes. The FOG 800
FT comes with a 3 meter wire remote control. 
 
Description
Power: 100-120V, 220-240V AC, 50-60Hz
Heater: 800W
Output: 3,000 Cu.ft/min.
Heat up time: 2 min. 45 sec.
Tank capacity: 0.8 liter
Fluid consumption rate: 50ml/min
Weight: 4.0 kg (8.81 lbs) - without liquid
Dimensions: 315 x 205 x 130 mm
Remote controller: 3 meter wire remote controller VR-1 

Z-80 with Wireless Remote UK Version • Z80 MK2 included wireless remote
• UK power connector Technical Info Power supply: AC 230/240 V – 50/60 Hz
Heater: 700 Watt
Output: 2500 cu. ft/min
Tank capacity: 0,8 L
Fluid consumption rate: 125 min/ L
Included remote: FC-5
Optional remote: FC-4
Dimensions: 330 x 160 x 130 mm (LxWxH)
Weight: 4,0 kg

Power: AC 240V, 50 Hz
Output: 18.000 cu. ft/min (509 m³/min)
Tank Capacity: 2,5 L
Fluid type: Fog Fluid
Fluid Consumption Rate: 44 Min/L(100% Output)
DMX: Yes
Heater: 1200W
Weight: 10,9 kg
Dimensions (LxWxH): 458 x 243 x 177 mm

Accessories/ordering info:
Remote: Z-8 (included)
Cable Length: 10M
Connector DMX: 3 Pin XLR in-out
Connector remote: 6,3 mm Stereo Jack
Functions: timer with interval, duration
and volume;
Continuous fogging; manual on/off
Compatible With: Z-1200II, ICE-101, LCU-1

Optional:
Z-9 Wireless Remote: Ordercode: 60698

JEM Magnum Pro 2000 Foger. Special long lasting and reliable heating unit. Variable fog output incl. timer. 1650W, 0.2l/min. Fluid at max power. aprox.13Kg with out fluid, Dimensions of Machine: 695mm x 356mm x 325mm

Specifications :

• 700 m³/min fog output 
• 1600 W heat exchanger
• 8 min heat-up time
• Continuous output
• Optional DMX
• Floor standing or truss mounting
• 9.5 liter fluid capacity
• Different fluid options for different applications
• DMX with optional DMX interface module
• On-board control panel
• Removable panel for remote control
• Timer and output level remote control

MDG MAX 5000 APS Smoke Machine 1415W

Extremely powerful,adjustable fog output
Virtually noiseless, with the finest fog and the longest hanging times
Automatic Purging System (APS) to prevent build-up and clogging
Compatible with remote control timer and DMX interface
Detachable remote control and 8 m (26 ft) cable included

Powerful fog output (up to 85 m3/3,000 ft3 per minute)
Portability option

TECHNICAL DATA
MAX 3000APS
Maximum fog output 218 m3 (3,000 ft3)
per minute
Fluid consumption 2.6 L (34 oz)
per hour at 2.76 bar (40 psi)
Gas type CO2 or N2
Gas consumption 2.25 kg (2.13 lb)
per hour at 2.76 bar (40 psi)
Reservoir capacity 2.5 L (0.66 US gallon)
Automatic Purging Standard feature
System (APS)
Fog colour Pure white
Particle size 0.5-0.7 microns
Warm-up time (maximum) 8 minutes
Fluid type MDG Neutral Fluid
(M.S.D.S. available on request)
Operating voltage 115 or 230 VAC,
50/60 Hz
Power consumption 715 W
Dimensions Length 61 cm (24?)
Width 28 cm (7?)
Height 30 cm (12?)
Weight 26 kg (43 lb)
Shipping weight 38 kg (72 lb)
(with flight case)
Approval CE approved, CSA
and UL pending

Digital technology and a new Design

The viper nt originate from the continued development and improvement of the Viper fog machine.
It unites the current digital technology with the proven technique and power of its predecessor.
New features guarantee a much more simple operation ? place and fog, reducing the amount of
time needed to set up the machine.

Features
? Control panel
The control panel with LED-display, simple symbols allow for easy operation. It also protects
the control buttons against dirt.
? Finest adjustments of the output
Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can
be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can
be produced. This enables the viper nt to be used in both small and large locations.
? DMX 512 as standard
The viper nt can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs.
The DMX start address can be adjusted and saved via the control panel.
The machine can also be controlled with analog (0 - 10 V) via a lighting desk or via XLR-remote
(option). This connection is done with 3pin-XLR-plugs.
A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short
press at the start button makes the machine run. Therefore a permanent pressing of the start button
is unnecessary.
? Internal timer
With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes
and the output in %.

Safety
The change of the design is not only cosmetic, it also has improved safety features.
The viper nt is equipped with new safety features.
On the front and the back part of the cover there are fixing points for safety bonds.
At both sides of the bottom of the machine are three holes to which a hanging yoke complete with
a collecting tray for fluid drips can be fixed.
Fluid
The following Look-fluids are available for the viper nt:
Quick-Fog (thick, quick disappearing fluid)
Regular-Fog (thick, long lasting fluid)
Slow-Fog (thick, extremly long lasting fluid)
Advantages
? DMX as standard, analog and stand-alone-mode
? Internal timer 
? Fog output adjustable in steps of 1% (0 - 99%)
? Continuous output
? Easy handling
? Powerful output
? Made in Germany

Technical Data:
Procedure: vaporizing fog generator
Power requirement: 1300 Watt
Voltage: 230 V / 50 Hz
              110 V / 60 Hz
Warm up time approx.  7 min.
Fluid consumption
at max. output
at continuous output: 120 ml/min.
.                                   35 ml/min.
Fluid tank capacity: 5 liter
Fog output: adjustable in 99 steps
Output projection:max. 15 m
Fogging time at Control: DMX 512
             0 ? 10 V analog
             Stand-alone-Mode
             Radio remote (Option)
Temperature control: Microprocessor controlled
Overheating protection: Heater block/Thermostat
                                       Pump/Thermal switch
Dimensions (L x W x H): 470 x 230 x 240 mm
Weight without bottle: approx. 8,3 kg