RODE LAV-HEADSET-LARGE Headset Mount

Headset-style wearable mount for lavalier microphones, large. Compatible with Rode Lavalier and SmartLav+

High-quality permanently polarized condenser headmic with omni-directional pick-up pattern

Headset vocal condenser microphone for wired or wireless applications.

The Audix HT2P is a professional head-worn microphone designed for use in performances, aerobics instruction, presentations and more. The HT2P features a frequency response of 50Hz to 15kHz, reproducing audio frequencies associated with vocals with pristine fidelity while eliminating noise at low frequency ranges. The HT2P features a hyper-cardioid polar pattern. The hyper-cardioid pattern provides excellent off-axis signal rejection, minimizing noise due to audio monitors, ambiance, other musicians and more. The headset itself is lightweight and padded for extra comfort, the capsule is completely resistant to moisture

Transducer     Condenser
Polar Pattern     Omnidirectional
Frequency Response     30Hz to 20kHz +/- 3dB
Dynamic Range (Typical)     Not Specified by Manufacturer
Signal-to-Noise Ratio     Equivalent Acoustic Noise: 29dBA SPL
Maximum Input Sound Level     130dB SPL
Power Requirements     Operating Current: 500uA
Operating Voltage: 1 to 2V
Power Supply Voltage:
+3V with 2.7k ohm Load
+5V with 6.8k ohm Load
+9V with 15k ohm Load
Output Impedance     2k ohms
Output Connectors     TA4-Female Connector for Shure Wireless Transmitters
Dimensions     Not Specified by Manufacturer
Weight     0.07 oz (2g)

• 8 hours of operation with a single AA size battery
• PT 45 bodypack transmitter also compatible with all AKG MicroMics
• Low battery indicator
• PT 45 bodypack designed to be compact and lightweight
• C 544 L headworn microphone comes with moisture shields protecting the transducer from perspiration for sports instruction and other active applications. The C 544 L uses the transducer of the C 555 L and is designed to be quick and easy to put on or replace if necessary

• Receiver Type: SR45 Receiver
• Carrier Frequency: A / 530 - 560MHz
• Modulation: FM
• Audio Bandwidth: 40 Hz to 20 kHz
• THD & Noise: typ. 0.8%
• Signal-to-Noise Ratio: typ. 105 dB(A)
• Squelch: -100 to -70 dBm Adjustable
• Connections: Balanced XLR and unbalanced 1/4" (6.3 mm) jack: adjustable from mic to line level. Output level at rated deviation: 500 mV rms
• Dimensions: 7.87 x 7.48 x 1.73" (200 x 190 x 44 mm)
• Weight : 0.80 lb (360 g)

• Transmitter Type: PT45 Bodypack
• Carrier Frequency: A / 530 - 560MHz
• Modulation: FM
• Audio Bandwidth: 40 Hz to 20 kHz
• THD & Noise: typ. 0.8%
• Signal-to-Noise Ratio: typ. 105 dB(A)
• RF Output: 10 mW
• Power: 1x 1.5V AA Battery, Up to 10 Hours
• Dimensions: 2.36 x 2.91 x 1.18" (60 x 74 x 30 mm)
• Weight: 0.13 lb (60 g)

• Microphone Type: C 544 L Headworn Microphone
• Transducer: Pre-polarized condenser microphone
• Polar Pattern: Cardioid
• Frequency Response: 20 Hz to 20 kHz
• Sensitivity: 40 mV/Pa (-28 dBV re 1 V/Pa) @ 1000 Hz
• Signal to Noise Ratio: 22 dB(A)
• Maximum Input Sound Level: 126 dB / 130 dB (for 1%/3% THD)
• Supply Voltage: 9 V battery supply through B 29 L or bodypack transmitter, or 9 to 52 V universal phantom power through MPA V L adapter
• Current Consumption: Approx. 2 mA
• Impedance: Electrical Impedance @ 1000 Hz: 200 ohms, electronically balanced
• Recommended Load Impedance: > 2000 ohms
• Connector: Mini XLR 3-pin female
• Operating Temperature: 4 to 140°F (-20 to +60°C), R.H. at 68°F (+20°C): 99%
• Dimensions: 5.2" (130 mm) Diameter
• Cable Length: 5\' (1.5 m)
• Net Weight: 1.1 oz (30 g) without connector

Shure WCM16 Headworn Condenser Microphone

The Shure Model WCM16 headworn electret condenser microphone is intended for wireless use by
performers, lecturers, and others who require the highest quality voice pickup with maximum mobility.
Its wide frequency response, low RF susceptibility and reliable operation at temperature and humidity
extremes make the WCM16 suitable for virtually any vocal application. When used with the Shure bodypack
transmitters, the performance of the WCM16 closely resembles the finest conventional vocal microphones.

 Miniaturized active circuitry included in the cartridge assembly provides equalization that tailors the low-frequency
response to resemble the warmproximity effect of larger vocal microphones. Because of this low-end response, it
is not necessary to position the microphone directly in front of the mouth, thus avoiding much popping and breath
noise, even without the supplied foam pop screen.

 The microphone's hypercardioid unidirectional pickup pattern provides maximum isolation from ambient noise and
from adjacent sound sources such as musical instruments, loudspeakers and other performers. This permits higher
gain-before-feedback without loss or masking of vocals.

Features:

Extra lightweight, adjustable headband stays secure and virtually disappears while being worn
Response comparable to finest conventional vocal microphones
Hypercardioid polar pattern provides maximum isolation from vocalist's own instrument and those of other performers
Uniform polar pattern at all frequencies for maximum gain before feedback
High input clipping level eliminates overload distortion
Cable terminates as 4-pin mini connector
Supplied acoustic foam pop screen
Reliable at temperature and humidity extremes

Specifications:

Frequency Response
50 to 18,000 Hz
Polar Pattern
Hypercardioid, uniform with frequency
Output Impedance
1200 ohms
Output Level (close-talked at 1,000 Hz)
Open Circuit Voltage -55.0 dbV (1.8 mV) at 0.6 m
1 Pascal=94 db SPL
Maximum Sound Pressure Level
150 dB at 1% THD
Dynamic Range
121 dB
Output Noise
29 dB equivalent SPL, A-weighted
Signal-to-Noise Ratio
65 dB at 94 dB SPL
Polarity
Microphone: Positive sound pressure on diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground) of microphone output connector
Receiver-- 1/4" Phone Jack Output: Positive sound pressure on diaphragm produces positive voltage on tip of receiver 1/4" output connector
Receiver-- XLR Output: Positive sound pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 of the XLR output connector
Current Drain
0.35 mA
Recommended Operating Voltage
+5 Vdc (positive on pin 2, negative on pin 1)
Environmental Conditions
Operating Temperatures: -18 to 60 degrees C (0 to 140 degrees F)
Storage Temperatures: -29 to 66 degrees C (-20 to 150 degrees F)
Humidity: 0 to 95%
Cable
1.5m (5 ft), small-diameter, shielded, with 4-pin mini connector
Case Finish (Microphone and Headband)
Matte black enamel
Net Weight
36 g (1.27 oz)