| Content |
| Acoustic principle: |
|
|
Permanently polarised condenser |
|
| Directional pattern: |
|
|
Cardioid |
|
| Frequency range: |
|
|
40Hz ~ 20kHz |
|
| Output impedance: |
|
|
200Ω |
|
| Signal noise ratio din iec 651: |
|
|
73dB SPL (per IEC651) |
|
| Equvalent noise: |
|
|
21dbA SPL (a - weighted per IEC651) |
|
| Maximum spl: |
|
|
142dB (@ 1kHz, 1% THD into 1kΩ load) |
|
| Sensitivity: |
|
|
-40dB+/-3dB re 1V/Pa @ 1kHz (6.3mV/Pa @ 94db SPL) |
|
| Dynamic range din iec 651: |
|
|
121dB (per IEC651) |
|
| Power supply voltage: |
|
|
1.6mA (battery)/6.5mA (48V Phantom Power) |
|
| Battery life: |
|
|
>200 hours |
|
| Output connection: |
|
|
3 pin XLR |
|
| Weight without battery: |
|
|
390g |
|
The e 865 is a fully professional super-cardioid vocal microphone utilising the
very best in condenser microphone technology to achieve new standards of
quality and sound. The microphone capsule insorporates special blast/pop
protiction plate to shield the diaphragm from excessive sound pressure levels.
Features
Rugged metal body
Extended dynamic response with pronounced presence and vocal 'punch'
Excellent feedback rejection
Very good rejection of handling noise
Very high sound pressure handling capability
Delivery Includes
1 e 865
1 microphone clip
1 pouch
Technical Data
Pick-up pattern super cardioid
Sensitivity in free field, no load (1kHz) 3 mV/Pa
Max. Sound pressure level (aktiv) 150 dB
Nominal impedance 200 Ohm
Min. terminating impedance 1000 Ohm
Dimensions d 47 x 193 mm
Weight w/o cable 311 g
Frequency response (microphone) 40.....20000 Hz
Phantom powering 12 - 48 V
|
The ME 67 is a long gun microphone head designed for use with the K6 and K6P powering modules. A highly directional microphone, it can be used where the microphone must be placed at a distance from the sound source. Matt black, anodised, scratch-resistant finish.
Pick-up pattern : lobar
Sensitivity in free field, no load (1kHz) : 50 mV/Pa +- 2,5 dB
Nominal impedance : 200 Ohm (K6)
Min. terminating impedance : 1000 Ohm (K6)
Equivalent noise level : 10 dB
Dimensions : d 22,5 x 343 mm
Weight : 100 g
| Behringer B-5 Sputtered Diaphragm Studio Condenser Microphone
The B-5 is a professional gold-sputtered diaphragm condenser microphone featuring two interchangeable capsules for different pickup patterns (cardioid and omnidirectional). It is perfect for acoustic instruments, vocals and overhead miking. Its ultra low-noise transformerless FET input eliminates low frequency distortion. The -10 dB attenuator can be used with high volume signal sources, while the low-cut filter eliminates floor rumble. The microphone is delivered in a rugged hard case with stand adapter and windscreen.
|
|
|
|
|
Professional true condenser microphone for studio and live applications |
|
2 interchangeable capsules with cardioid and omnidirectional pickup patterns |
|
Low-mass gold sputtered diaphragm for ultimate sound reproduction |
|
Perfect for acoustic instruments, voice and overhead etc. |
|
Ultra low-noise transformerless FET input eliminates low-frequency distortion |
|
Smooth, super-wide frequency response and incredible musicality |
|
Switchable low-frequency roll-off and -10 dB input attenuation |
|
Gold-plated 3-pin XLR output connector |
|
Rugged construction with satin nickel-plated brass body |
|
Custom microphone stand adapter, windscreen and transport case included |
|
- With exchange capsule (1x cardioid and 1x omnidirectional)
- Gold-plated XLR connector
- Accessories: clamp, wind shield, case
- 48 V Phantom power required
|
Back-electret Microphone Capsule suitable for K6 and K6P Powering Modules. The ME 64 is a cardioid microphone capsule designed for use with the K6 and K6P powering modules. It has a very wide range of applications including reporting, interviews, dubbing, live sound reinforcement and recording applications. Matte black, anodized, scratch-resistant finish.
Features
Excellent directivity across whole frequency range
Very good feedback rejection
Effective rejection of incidental rear noise
High speech clarity
High maximum sound pressure level
Wide frequency range
Integrated pop filter
| The Stereo wonder. The new NT4, a visually striking microphone that solves
the age-old problem of stereo recording by eliminating the need to purchase
matched pairs and the associated complex set-up bars and adaptors to get
professional results. With a fixed 90 Deg. X/Y configuration and perfectly
matched stereo condenser capsules, the NT4 lets you record any source with
immaculate stereo detail.
The NT4 has a 128 dB dynamic range, 143 dBA SPL and low self-noise. Offering
selectable battery or phantom power operation with power indicator light, the NT4
is ideally suited to both studio and location recording.
The NT4 comes supplied in a custom carry case with a windshield, XLR to mini-jack
and dual XLR cables for portable DAT or professional balanced input connection.
SPECIFICATIONS:
Acoustic principle:
Stereo Microphone. 90° XY placement. Each side comprises an
externally polarised single diaphragm condenser transducer
Directional pattern: Cardioid per capsule
Frequency range: 20Hz - 20kHz
Output impedance: 200? per side
Signal noise ratio din iec 651: 78dB
Equvalent noise:128 dB
Power supply voltage:
P48 (38V?52V), P24 (20V-26V), P12 (10.8V-13.2V), 9V battery
Current consumption: 4 mA, 2 mA, 2.8 mA, 2.4mA
Weight without battery: 480g
Weight with battery: 2.3kg |
€ 
£ 
$ 
kr. 
kr 
kr 
CHF 
лв. 
рсд 
zł 
Ft 
lei 
Kč 
ден 
L 
Reviews
There are no reviews yet.