Stinger 10 G2 Passive Full-Range Speaker The Stinger 10 G2 is an especially compact and versatile full-range speaker for portable use and installation. The passive 2-way system has a continuous power rating of 250W. The broad frequency range is provided by a 10″ woofer and a 1“BMS HF driver that attain a maximum sound level pressure of […]
The Stinger 10 G2 is an especially compact and versatile full-range speaker for portable use and installation.
The passive 2-way system has a continuous power rating of 250W. The broad frequency range is provided by a 10″ woofer and a 1“BMS HF driver that attain a maximum sound level pressure of 120dB. The Stinger 10 G2 is connected via Speakon-compatible connectors.
An ergonomically milled, recessed carrying handle in the cabinet makes it easier to transport. The bass reflex cabinet is made of sturdy multiplex. It has threaded inserts for flying and wall mounting. Mounting brackets and a protection cover are available as accessories.
Type: passive
Woofer size: 10“
Woofer size: 254 mm
Woofer magnet: ferrite
Woofer brand: custom made
Woofer voice coil: 2“
Woofer voice coil: 50.8 mm
Horn: CD horn
HF driver size: 1“
HF driver size: 25.4 mm
HF driver magnet: ferrite
HF driver brand: BMS
HF driver voice coil: 1“
HF driver voice coil: 25.4 mm
Dispersion angle (H x V): 100 x 55°
Power output (RMS): 250 W
Power output (peak): 500 W
Frequency range: 65 – 19,000 Hz
Crossover frequency: 2400 Hz
SPL (1 W/1 m): 96 dB
Max SPL: 120 dB
Impedance: 8 ohms
Protection: HF driver
Speaker inputs: 1
Speaker input connections: Speakon compatible
Speaker outputs: 1
Speaker output connections: Speakon compatible
Cabinet material: 15 mm plywood
Cabinet surface: textured coating
Cabinet type: bass reflex
Monitor angle: 54°
Width: 320 mm
Height: 500 mm
Depth: 290 mm
Features: Aluminium stand support 36 mm, ergonomically milled handles, M10 thread for SuperClamp
11,4 kg/Piece(s)
Weight
12.00 kg
Reviews
There are no reviews yet.
Be the first to review “LD Systems LDEB102G2 STINGER G² Series – 10″ PA Speaker passive 250W” Cancel reply
The Stinger 10 G2 is an especially compact and versatile full-range speaker for portable use and installation.
The passive 2-way system has a continuous power rating of 250W. The broad frequency range is provided by a 10" woofer and a 1“BMS HF driver that attain a maximum sound level pressure of 120dB. The Stinger 10 G2 is connected via Speakon-compatible connectors.
An ergonomically milled, recessed carrying handle in the cabinet makes it easier to transport. The bass reflex cabinet is made of sturdy multiplex. It has threaded inserts for flying and wall mounting. Mounting brackets and a protection cover are available as accessories.
Type: passive
Woofer size: 10“
Woofer size: 254 mm
Woofer magnet: ferrite
Woofer brand: custom made
Woofer voice coil: 2“
Woofer voice coil: 50.8 mm
Horn: CD horn
HF driver size: 1“
HF driver size: 25.4 mm
HF driver magnet: ferrite
HF driver brand: BMS
HF driver voice coil: 1“
HF driver voice coil: 25.4 mm
Dispersion angle (H x V): 100 x 55°
Power output (RMS): 250 W
Power output (peak): 500 W
Frequency range: 65 - 19,000 Hz
Crossover frequency: 2400 Hz
SPL (1 W/1 m): 96 dB
Max SPL: 120 dB
Impedance: 8 ohms
Protection: HF driver
Speaker inputs: 1
Speaker input connections: Speakon compatible
Speaker outputs: 1
Speaker output connections: Speakon compatible
Cabinet material: 15 mm plywood
Cabinet surface: textured coating
Cabinet type: bass reflex
Monitor angle: 54°
Width: 320 mm
Height: 500 mm
Depth: 290 mm
Features: Aluminium stand support 36 mm, ergonomically milled handles, M10 thread for SuperClamp
11,4 kg/Piece(s)
The CBR10 is the most compact model in its series. While delivering astonishing power for its size and weight, the CBR10 is ideal for both portable and installed applications.
Full Range Speaker
Equipped with: 10" + 1“
Dispersion: 90° x 60° CD horn
Power: 300 W RMS
Impedance: 8 Ohm
Frequency range: 95 - 19,000 Hz
Max. SPL: 126 dB
Flange mount
3 x M8 fly points
2 Handles
Connectors: 2 x speaker twist
Dimensions: 320 x 480 x 290 mm
Weight: 12.9 kg
Specifications
Technical data
Speaker Type 2-Way Passive Speaker
Acoustical data
Nominal Power Rating 300 W/RMS
Program Power Rating 600 W/RMS
Peak Power Rating 900 W/RMS
Impedance 8 Ohms
Sensitivity 1W@1m 96 dB
Frequency Response [-10dB] 70 - 20.000 Hz
Frequency Response [+/- 3dB] 90 - 19.000 Hz
Max SPL 127 dB
HF 1 "
Type HF Compression Driver
Voice Coil HF 1.5 "
Driver Protection PTC
Directivity 90X70 °
Horn CD Horn Aluminium
Rotatable Horn Yes
Crossover Frequency (passive) 1800 Hz
Slope MF-HF 18 dB/Octave
LF 10 "
Voice Coil LF 2 "
Input Section
Signal Input 1x Speakon
Pin 1+=+
Pin 1-=-
Signal Output 1x Speakon
Pin 1+=+
Pin 1-=-
Mechanics
Housing Multiplex birch plywood
Housing Design Multifunctional
Color Black
Surface Texture Textured acrylic lacquer
Handles 1x on back
Pole Mount 36mm
Angles Up Monitore use 45 °
Front Grille 1.5 mm metall grille with acoustic foam in back
Rigging Points 12 x M8
Width 320 mm (12.8 in)
Height 508 mm (20.32 in)
Depth 320 mm (12.8 in)
Weight 14.2 kg (31.31 lbs)
Downloads
Accessory
Systems / Components
The PS-10 JB-Systems is a compact passive speaker with a woofer 10 "is the perfect choice for small applications where high power is not necessary. It is a versatile device that can be used in different installations, there is even a special holder designed for use as a monitor.
JB-Systems Specification PS-10:
This enclosure is suitable for fixed installation and mobile application, the rugged polypropylene housing provides excellent protection components. SP-10 can be mounted on a stand with a standard speaker connection 35mm and can be mounted easily using the integrated mounting points. And as mentioned earlier, you can use the stand included for use as a monitor. This device also has a sturdy handle for easy transport and rubber feet protect the bottom of your speaker.
passive Speaker
10 "woofer
1.35 "compression driver
Power: 160W RMS, 320W peak
Impedance: 8 Ohm
Speakon In / Out
polypropylene housing
sturdy handle
Rubber feet
Can be mounted on standard stand (35mm)
Points integrated mounting
Supplied with bracket for use as a monitor
Weight: 10.3kg
User\'s manual Technical drawing
Passive 2-way bass-reflex installation speaker
200 W permanent load capacity
118 dB maximum sound-level pressure
10" custom woofer and 1" Celestion high-frequency driver
Rotating CD horn with 80° x 60° dispersion
For vertical or horizontal use
speakON-compatible and terminal block input
4 x M8 mounting holes
Shock-resistant front grille for optimum speaker protection
Extensive range of smart accessories for installation
Available in black or white
With its streamlined and compact design, the LD Systems SAT 102 G2 is excellently suited for permanent installation and discreet integration into virtually any setting. It features a 10" custom woofer and a 1" compression driver from Celestion, connected to a rotating CD horn with 80° x 60° dispersion. This makes the passive 2-way speaker ideal for both vertical and horizontal use.
The SAT 102 G2 attains a maximum sound-level pressure of 118 dB over a frequency response curve of 65–19 kHz with a permanent load capacity of 200 watts. The reflex casing made of 15 mm MDF has four M8 mounting holes. The inputs are a speakON-compatible socket and a terminal block, while an additional terminal block serves as an output for convenient parallel connection.
Special wall holders are available as an accessory to facilitate wall mounting. The SAT 102 G2 is available in black (Art. No. LDSAT262G2) or white textured finish (Art. No. LDSAT262G2W).
Product type
Installation Loudspeakers
Type
Wall-mounted Loudspeaker
Low/mid driver dimensions
10 "
Woofer size
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Woofer voice coil (mm)
50.8 mm
Horn
CD horn
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
Celestion
Dispersion (H x V)
80 x 60 °
Load rating (RMS)
200 W
Peak power
400 W
Frequency response
65 - 19000 Hz
SPL (1W/1m)
95 dB
Max. SPL
118 dB
Impedance
8 Ohm(s)
Protection circuits
HF Driver
Loudspeaker inputs
2
Speaker input connections
Speakon compatible , terminal block
Loudspeaker outputs
1
Speaker output connections
terminal block
Cabinet material
15 mm MDF
Cabinet surface
texture paint
Cabinet colour
white
Cabinet construction
vented
Width
300 mm
Height
550 mm
Depth
270 mm
Weight
12,2 kg
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.