| Content |
Stinger 15 G2 Active Full-Range Speaker
The Stinger 15 G2 is an active, 2-way full-range speaker with numerous potential applications, whether in a portable PA system, as a monitor or in permanent installations.
The built-in Hypex Ucd400 Class D power amp delivers 400W / 4 ohms continuous power to a 15" woofer and a 1" BMS HF compression driver, which ensure an outstanding sound and an extremely high maximum sound level pressure of 120dB (134dB peak). It is connected using XLR/jack combo connectors and an XLR output. Passive Stinger speakers or subwoofers can be driven in parallel via a Speakon-compatible power amp output. An onboard 2-band EQ is provided for perfect tone control.
The hardware of bass reflex cabinet made of sturdy multiplex includes six M8 mounting holes for flyware, a stand support that is vertically adjustable by ±13,5° max. in three increments for optimum orientation, and the innovative LD "Evolutive" handles. The new handles offer a comfortable grip from all sides for secure carrying. Mounting brackets and a protection cover are available as accessories.
- Type: active
- Woofer size: 15“
- Woofer size: 381 mm
- Woofer magnet: ferrite
- Woofer brand: Custom Made
- Woofer voice coil: 3“
- Woofer voice coil: 76.2 mm
- Horn: CD horn
- HF driver size: 1“
- HF driver size: 25.4 mm
- HF driver magnet: ferrite
- HF driver brand: BMS
- HF driver voice coil: 1“
- HF driver voice coil: 25.4 mm
- Amplifier: Class D, Hypex Ucd400
- Dispersion angle (H x V): 100 x 55°
- Power output (RMS): 400 W
- Power output (peak): 800 W
- Frequency range: 50 - 19,000 Hz
- Crossover frequency: 1800 Hz
- Max SPL (continuous/peak): 120 / 134 dB
- Protection: HF driver, over voltage, over current
- Controls: Bass, Line Gain, Mic Gain, Power, Treble, Volume
- Indicators: Limit, Power, Protect (protective circuit active), Signal
- Line inputs: 1
- Line input connectors: XLR/ 6.3 mm jack (combo)
- Line outputs: 1
- Line output connectors: XLR
- Power supply: switching power supply
- Cabinet material: 15 mm plywood
- Cabinet surface: textured coating
- Cabinet type: bass reflex
- Monitor angle: 54°
- Width: 480 mm
- Height: 650 mm
- Depth: 460 mm
- Features: 6 x M8 mounting holes for flyware, LD Systems Evolutive grips, SM707 stand support 36 mm
|
he das Audio dr speaker range combine the best of lightweight portability with premium quality sound performance and high output capabilities. The Dr 15a is a very portable self-powered system with an extremely efficient 15" woofer that is capable of a seriously impressive and very punchy bass & mid range output. A custom m-34 compression driver handles high frequency reproduction with a clean, smooth and dynamically transparent clarity. Each driver is powered directly by its own perfectly matched independent amplifier in this bi-amplified active system for maximum efficiency and incredible sound pressure levels. A built-in two-channel mixer comprises both microphone and line inputs, allowing for use in any format, with or without additional mixer or audio sources. Manufactured and designed by das, in Spain, the dr are constructed using the latest in, mechanics, magnetics, acoustics and electronics technology to create speakers that are tough, reliable and capable out performing any rival model their class.
TECHNICAL SPECIFICATIONS:
Mobile DJ, disco, PA or install use
200 Watt active speaker
Nominal LF power amplifier 150 Watt (AB)
Nominal HF power amplifier 50 Watt (AB)
127dB SPL
45Hz - 20kHz frequency range (-dB)
2 way
15" woofe speaker
1" compression driver
Female XLR-Jack input
LOOP THRU : Jack
Input Impedance line : 20 kohms; mic : 2 kohms
Polypropylene enclosure
35mm integral pole mount fitting
Black finish
Weight: 23.4kg (including packaging)
Height: 70.0cm x Width: 45.0cm x Depth: 36.0cm
Warranty: 12 months
Power: 240V / 110V Switchable
| LD Systems Stinger MON81AG2
The LD Stinger MON81AG2 is an especially compact active monitor with broad frequency response and a maximum sound-level pressure of 116dB for versatile use on stage.
The 8" coaxial speaker with an integral 1" HF driver attains a dispersion angle of 75°x75°, which is beneficial in multifaceted applications as a stage monitor. The coaxial configuration results in a very homogenous sound in the entire dispersion area plus very low susceptibility to feedback. The active monitor is driven by a Class AB power amplifier with an output power of 80W RMS; short-circuit protection and a limiter ensure dependable operation.
The signal is connected and looped through using an XLR/ jack combo socket and the XLR output. The rear connector panel is rounded out by a volume control, LED indicators, and the IEC power socket
The elegant bass-reflex housing made of 15mm multiplex is finished with a durable coating and has ergonomically milled handles and a metal grille to protect the speaker. The monitor angle is 35°.
Type: active
Woofer size: 8“
Woofer size: 203 mm
Woofer type: coaxial speaker
Woofer magnet: ferrite
Woofer brand: custom made
Woofer voice coil: 2
Woofer voice coil: 50.8 mm
HF driver size: 1“
HF driver size: 25.4 mm
HF driver magnet: ferrite
HF driver brand: custom made
HF driver voice coil: 1“
HF driver voice coil: 25.4 mm
Amplifier: Class A / B
Dispersion angle (H x V): 75° x 75°
Power output (RMS): 80 W
Power output (peak): 160 W
Frequency response: 90 Hz - 20 kHz
Crossover frequency: 2.400 Hz
SPL (1 W/1 m): 97 dB
Max. SPL (continuous): 111 dB
Max. SPL (peak): 116 dB
Protection: limiter, short-circuit
Controls: Volume, On / Off
Indicators: Power, Limit
Number of line inputs: 1
Line input connectors: XLR/ 6.3 mm jack (combo)
Number of line outputs: 1
Line output connectors: XLR
Power supply: transformer
Operating voltage: 230 V AC / 50-60 Hz
Cabinet material: 15 mm plywood
Cabinet type: bass reflex
Monitor angle: 35°
Width: 320 mm
Depth: 250 mm
Height: 361 mm
Features: Ergonomic insert handles |
Inside our rigid custom designed cabinet is a 15" driver designed exclusively for this project. It's matched with a new 1.75" Titanium high frequency driver, aimed through a 1" diameter horn. The dB500a features 500 watts of clean power (400 watts low frequency/100 watts high frequency) and has a crossover designed for high SPL. Our exclusive Optimax(TM) signal processing circuitry provides total speaker protection but won't cut the low end at high volumes, as similar speakers with sliding filters do.
The back panel has a built-in mixer-like preamp section with mic and line inputs, XLR connectors and level controls. Controls for the selectable low pass filter and Optimax processing are also included.
The dB500a speaker cabinet features an array of mounting options. Designed with floor monitoring in mind, they are also easily stacked or permanently installed. A 1 3/8" pole receptacle is built in, and 10 reinforced fly points are available.
|
JBL VP7315-64DPAN Powered 15'' 3-way 1100W RMS Loudspeaker System
Key Features :
Powered bi-amplified full-range loudspeaker with JBL DrivePack? technology for portable or installed use.
2200 Watts peak output power, 1100 Watts continuous.
HiQnet? compatible; network control.
15-inch Differential Drive? low-frequency driver for
extended low-frequency output.
60° x 40°coverage.
Stylized and ergonomically designed powder-coated
die cast aluminum handles.
Six 3-inch fly track suspension points and fourteen M10
fittings (optional detachable flying fittings and forged eye
bolt kits available).
Optional DPCN (CobraNet?) digital audio input
module available.
Specifications:
|
Frequency Range |
: |
34 Hz to 20 kHz (-10 dB) |
|
Frequency Response |
: |
43 Hz to 18 kHz ( ± 3 dB) |
|
Coverage Pattern |
: |
60°x 40° rotatable waveguide |
|
Directivity Factor (Q) |
: |
15.85 |
|
Directivity Index (DI) |
: |
12 dB |
|
Maximum Peak Output1 |
: |
138 dB SPL 1m |
|
Transducer Section |
|
|
|
Low Frequency Section |
: |
JBL 2265G, 381mm (15 in) dia.,
76mm (3 in) Dual Coil neodymium Differential Drive?, Direct Cooled |
|
Bandpass
Nominal Impedance |
: |
4 ohms |
|
Mid/High
Frequency Section |
: |
|
|
Mid Frequency |
: |
JBL CMCD-82H, 200mm (8in)
Dual Coil Differential? transducer |
|
High Frequency |
: |
JBL2452H-SL, 100mm (4in) titanium damped diaphragm, 1.5in. exit |
|
Waveguide |
: |
JBL PT-K64-MHF |
|
Bandpass
Nominal Impedance |
: |
8 ohms
|
|
System |
|
|
|
DP2 Internal
Amplification Output
(at nominal load) |
: |
2200 Watts Peak,
1100 Watts Continuous |
|
DP2 Output (Continuous
IEC shaped pink
noise into rated
load impedance) |
: |
750LF/350HF Watts |
|
DP2 Output Section |
: |
2-Channel, Class I |
|
Audio Input connector: |
: |
XLR with loop-through |
|
Network
Control Connector |
: |
Ethernet, RJ45 |
|
Signal Processing |
: |
DSP Based, resident in
Input Module |
|
System Management
|
: |
DSP based limiters for mechanical
and thermal protection |
|
AC Power
Operating Range |
: |
Auto Select 90-132VAC/
216-264VAC, 50/60Hz
|
|
AC Line Voltage |
: |
50/60 Hz, Auto-Detect; 120V/
240V (-15%, +10%) |
|
AC Input Connector |
: |
Neutrik PowerCon |
|
AC Loop-Thru |
: |
Neutrik PowerCon |
|
AC Current Requirement |
: |
6A per system at 120V, 3A per
system at 240V |
|
Enclosure |
|
|
|
Box Construction |
: |
5/8in. multi-ply exterior grade
Baltic birch. Internally braced.
Black DuraFlex? finish.
|
|
Suspension System |
: |
6 standard air-cargo 3 in. track
and 12 M10 fittings
|
|
Grille |
: |
14 Gauge Black powder-coated
perforated steel with foam backing
|
|
Dimensions
(H x W x D) |
: |
914.4 x 528.3 x 624.8mm
(36 x 20.8 x 24.6 in) |
|
Net Weight |
: |
44 kg (97 lb) | |
- 1000w RMS, 2000w peak, power delivers clarity, punch and more than enough headroom for any
- performance or practice space
- Specially-voiced 12-inch woofer and high frequency compression driver deliver your drum sounds
- with precise, full response across the entire frequency range without any artificial colouration
- (2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator
- XLR output to link another Strike Amp 12 or send your performance to another input device
- Lightweight and flexible tilt-back cabinet design that can also be pole-mounted
- Contour EQ switch to control your sound
- Ground-Lift switch eliminates unwanted noise
Specifications:
- Output: Power 2000W (peak, 1300LF + 700HF), 1000W (continuous RMS, 650LF + 350HF)
- Low-Frequency: 12.0” (305mm) low-frequency driver, 3.0” (76mm) high-temperature voice coil
- High-Frequency: 1.4” (35mm) voice coil, neodymium-magnet high-frequency driver with precision waveguide
- Crossover Frequency: 2.0KHz
- Maximum SPL: 131dB (peak), 128dB (continuous) (dB-SPL @ 1m)
- Frequency Response: 53Hz – 20kHz (+3dB)
- Frequency Range: 46Hz – 22kHz (-10dB)
- Horn Coverage 90o horizontal x 60o vertical (nominal)
- Equalisation: Contour switch with low- and high-frequency +3dB boost
Connectors:
- (2) XLR/TRS 1/4” (6.35mm) combo inputs
- (1) XLR link output
- (1) IEC power cable input
- Controls Power switch, (2) volume control knobs (1 per input), EQ contour switch, ground-lift switch
- Indicators: (2) power LEDs (1 front-panel, 1 rear-panel), clip limiter LED
- Protection: Electronic clip, thermal & transducer overdrive
- Input Voltage: 100V~, 110–120V~, 220–240V~; 50/60Hz (switchable)
- Fuse: 100–120V T10AL AC250V 220–240V T5AL AC250V
- Consumption: 800W
- Enclosure: Trapezoidal, injection-molded polypropylene enclosure with perforated steel grille
Dimensions: (width x depth x height) 605 x 354 x 350mm
Weight: 16.3kg |
Reviews
There are no reviews yet.