Content |
- 2-way passive 8” bass reflex PA speaker
- 400 watts RMS power handling
- 125 dB maximum SPL
- 12" custom woofer and BMS compression driver
- BEM optimized HF waveguide for uniform coverage
- Birch ply cabinet with ultra rugged polyurea finish and M10 suspension points
- Shock-resistant front grill provides maximum speaker protection
- 36 mm Dual-Tilt pole receptacle for 0° or 5° mounting angles
- Large selection of smart installation and transport accessories
STINGER 12 G3
Engineered for rock-solid reliability day in, day out this passive 2-way loudspeaker is a truly professional performer. With its multi-purpose bass reflex construction it is equally suitable for fullrange, satellite or floor monitor use in live PA systems and permanent installations. The Stinger® 12 G3 boasts a mighty 400 watts RMS power handling and 125 dB maximum sound pressure. It is loaded with a custom designed 12” woofer and BMS compression driver delivering extended low frequency response and smooth, crisp highs. The HF waveguide has been designed using BEM, the numerical modeling of sound radiation and propagation. It reduces floor and ceiling reflections, effectively eliminates side lobes and achieves a controlled uniform coverage pattern. The Stinger® 12 G3 is designed to be a real workhorse throughout. The enclosure is made of rigid birch ply and coated with ultra tough polyurea for extraordinary strength and durability. Sporting a steel front grille, Dual-Tilt pole receptacle, multiple suspension points and ergonomic handles the Stinger® 12 G3 is an attractively priced choice for truly professional sound reinforcement. A large selection of accessories facilitate live and installed applications.
Product type PA loudspeaker
Type passive
Low/mid driver dimensions 12 "
Woofer Size 304.8 mm
Woofer magnet Ferrite
Woofer brand Custom-made
Woofer voice coil 2.5 "
Woofer voice coil (mm) 63.5 mm
Horn CD horn
HF driver dimensions 1 "
HF Driver Size 25.4 mm
HF driver magnet Ferrite
HF driver brand BMS
HF driver voice coil 1 "
HF Driver Voice Coil 25.4 mm
Dispersion (H x V) 90 ° x 50 °
Load rating (RMS) 400 W
Peak power 800 W
Frequency response 58 - 20000 Hz
SPL (1W/1m) 99 dB
Max. SPL 125 dB
Impedance 8 Ohm(s)
Protection circuits HF Driver
Loudspeaker inputs 1
Speaker input connections Speakon compatible
Loudspeaker outputs 1
Speaker output connections Speakon compatible
Cabinet material 15 mm Plywood
Cabinet surface Polyurea
Cabinet construction vented
Monitor angle 54 °
Width 390 mm
Height 627 mm
Depth 377 mm
Weight 17,7 kg |
Active or Passive Passive Frequency Response -10dB:48-20,000Hz Power Capacity 600W Maximum Sound Pressure Level (SPL) 131dB Nominal Sensitivity 97dB Impedance 8 ohms Crossover 2KHz Low Frequency Driver DVX3121, 12" (305mm) Driver High Frequency Driver ND2, 1" (25.4mm) exit Neodymium Enclosure Material Polypropylene Structural Foam Input Connections Glandnut SJO cable Mounting Options Enclosure has locations for 4 Single-StudAttachment Plates and 10 Forged SteelEyebolts - 2 on Top, 2 on Bottom, 2 onSide, and 1 on Rear of Enclosure Dimensions 24.14 x 15.64 x 14.26" (613 x 397 x 362mm) Weight 43.7 lbs (19.8 kg) |
Electro-Voice TX1122 Tour-X 2-Way 12" PA Speaker The Electro-Voice TX1122 is a high power, 2-way loudspeaker system that can be used in a variety of applications where high-quality sound reinforcement is required in a lightweight package. It utilizes the DH3, high output 1.25" titanium compression driver, coupled to a constant directivity 90 degree x 50 degree horn. This combination results in a smooth response to 20 kHz and excellent pattern control in short to medium throw applications. The SMX2120 12" woofer has an FEA optimized magnet structure for very low distortion and maximum intelligibility at high SPL levels. The crossover uses steep 24dB/octave slopes with equalization for very smooth response in vocal range, extended HF, and a protection circuit for long-term reliability. It has a variety of features that make it equally suited for portable or fixed installation applications. The trapezoidal enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoat for maximum strength while still remaining lightweight. The unique grille design is very strong, dent resistant, and features a rotatable logo. Four-way handles allow for gripping in a variety of positions, a pole mount allows for placement on a subwoofer or a tripod. Six 3/8" threaded points allow a single TX1122 to be suspended in a various positions. The recessed input panel with dual NL4 connectors keeps the connectors hidden, while allowing it to be used with the TX1181 subwoofer for extended sub bass on a single amplifier channel, with no additional processing needed.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
- Freq. response (-3 dB): 60Hz - 20kHz
- Freq. range (-10 dB): 45Hz - 20kHz
- Rec. Hi-pass frequency: 45Hz
- Axial sensitivity: 97dB (1W/1m)
- Max. calculated SPL: 130dB
- Horizontal coverage: 90 degree
- Vertical coverage: 50 degree
- Power handling: 500W continuous, 2000W peak
- LF transducer: SMX2120, 12" (305mm) driver
- HF transducer: DH3, 1.25" (32mm) diaphragm compression driver
- Crossover frequency: 1750Hz
- Nominal impedance: 8 Ohms
- Minimum impedance: 5.4 Ohms
- Connectors: (2) Neutrik Speakon NL4\'s
- Enclosure material: plywood and MDF with EVCoat
- Grille: 16 GA steel, black powdercoat, with rotatable logo
- Suspension: (6) 3/8" threaded points - (2) on each side and (2) on the rear of enclosure
- Dimensions (H x W x D): 24.3" x 15.0" x 15.0" (616mm x 382mm x 380mm)
- Net weight: 44.5lbs (20.2 kg)
- Shipping weight: 50.0lbs (22.7 kg)
|
Features * DVX3121 12" LF Transducer with forced air cooling * ND2 2" Voice Coil, 1" Exit Neodymium CompressionDriver * 90° x 50° Coverage Pattern * 600W Continuous (2400W peak) power handling * High sensitivity, 131 dB maximum SPL * Adjustable monitor angle (45° or 55°) * 2 Anchor plates for single stud fittings and 7integral suspension points * Available in black or white * Passive/biamp selectable * Full line of accessories Specifications * Frequency Response (-3dB): 58Hz-15kHz * Frequency Range (-10dB): 48Hz-20kHz * Rec. Hipass Frequency: 50Hz * Axial Sensitivity: 97dB (1W/1m) * Max. Calculated SPL: 131 dB * Horizontal Coverage: 90° * Vertical Coverage: 50° * Power Handling (Passive): 600W continuous, 1200Wprogram, 2400W peak * LF Power Handling (Biamp): 500W continuous, 1000Wprogram, 2000W peak * HF Power Handling (Biamp): 40W continuous, 80Wprogram, 160W peak * LF Transducer: DVX3121, 12" driver * HF Transducer: ND2, 1" exit Neodymium compressiondriver * Crossover Frequency: 2kHz * Nominal Impedance: 8 ohms * Minimum Impedance: 6.2 ohms * Connectors: (2) Neutrik Speakon NL4\'s * Enclosure Material: Polypropylene structural foam * Suspension: Enclosure has locations for 4 single-studattachment plates and 10 forged steel eyebolts - 2 on top, 2 on bottom, 2 onside, and 1 on rear of enclosure * Grille: Polyester powder coated, 16GA Galvanizedsteel, with rotatable logo * Dimensions (H x W x D): 24.14" x 15.64" x 14.26“ * Net Weight: 43.7 lbs * Shipping Weight: 48.6 lbs |
Features
* DVX3121 12" LF Transducer with forced air cooling * ND2 2" Voice Coil, 1" Exit Neodymium CompressionDriver * 60° x 60° Coverage Pattern * 600W Continuous (2400W peak) power handling * High sensitivity, 131 dB maximum SPL * Adjustable monitor angle (45° or 55°) * 2 Anchor plates for single stud fittings and 7integral suspension points * Available in black or white * Passive/biamp selectable * Full line of accessories
Specifications
* Frequency Response (-3dB): 58Hz-15kHz * Frequency Range (-10dB): 48Hz-20kHz * Rec. Hipass Frequency: 50Hz * Axial Sensitivity: 97dB (1W/1m) * Max. Calculated SPL: 131 dB * Horizontal Coverage: 60° * Vertical Coverage: 60° * Power Handling (Passive): 600W continuous, 1200Wprogram, 2400W peak * LF Power Handling (Biamp): 500W continuous, 1000Wprogram, 2000W peak * HF Power Handling (Biamp): 40W continuous, 80Wprogram, 160W peak * LF Transducer: DVX3121, 12" driver * HF Transducer: ND2, 1" exit Neodymium compressiondriver * Crossover Frequency: 2kHz * Nominal Impedance: 8 ohms * Minimum Impedance: 6.2 ohms * Connectors: (2) Neutrik Speakon NL4\'s * Enclosure Material: Polypropylene structural foam * Suspension: Enclosure has locations for 4 single-studattachment plates and10 forged steel eyebolts - 2 on top, 2 on bottom, 2 onside, and 1 on rear ofenclosure * Grille: Polyester powder coated, 16GA Galvanizedsteel, with rotatable logo * Dimensions (H x W x D): 24.14" x 15.64" x 14.26“ * Net Weight: 43.7 lbs * Shipping Weight: 48.6 lbs | Axial Sensitivity 94 dB
Case Material 9-ply, 15mm Plywood, Internally Braced, with Texured Paint
Frequency Response (-3 dB) 82 Hz - 18 k Hz
Frequency Response (-10 dB) 55 Hz - 20 k Hz
Recommended High-Pass Frequency 45 Hz
Max. SPL/1m (calc) 132 dB
Coverage
(Nominal -6 dB) H° 90 °
Coverage
(Nominal -6 dB) V° 50 °
LF Transducer (1) EVS-12K, 305mm (12”) Woofer
HF Transducer DH-1K, 39mm (1.5”) Titanium Diaphragm Compression Driver
Crossover Frequency 2.1 k Hz
Nominal Impedance (Passive) 8 Ω
Minimum Impedance 7 Ω
Connector Type Dual NL4
Grill 18GA Steel with Black Powdercoat
Height 607 mm (23.9“)
Width 362 mm (14.25“)
Depth 340 mm (13.39“)
Weight Net 15.8 kg (34.83 lbs)
Shipping Weight 20 kg (44.09 lbs) |
Reviews
There are no reviews yet.