Content |
The TASCAM SS-200 Solid State Recorder - designed for the Broadcast and Contractor markets - record in WAV & MP3 to Compact Flash, SD/SHC, and USB memory. The SS-R200 features parallel and RS-232C serial control balanced & unbalanced I/O, and coaxial digital I/O. It supports the RC-20 direct play remote for up to 20 tracks of flash start.
- Solid state recoding to any available Media (CF, SD/SDHC, USB Memory)
- One-rack-space compact design
- Up to 20 tracks of flash start with RC-20 and RC-SS20 remote control devices
- PS/2 or USB keyboard connection for file name edit, transport control, edit and flash start
- RS-232C and Parallel Control I/O
- Multiple playback modes for situations requiring continuous, single, programmed and random playback
- Playback speed control without pitch change
- XLR balanced I/O, RCA unbalanced I/O, coaxial S/PDIF, or AES/EBU digital I/O
- Dimensions (W x H x D): 19 x 1.8 x 11.9 (in) 482.6 x 44.5 x 301 (mm)
- Weight: 7.50 (lbs) 3.4(kg)
|
Professional digital recording 24channel system, 24 bit/96 kHz, with hard disk drive and 24 analog in/out and 3 adat in/out
|
Features at a glance - XLR plug-on connection
- Compatible with dynamic mics as well as bettery-powered condenser mics
- 48kHz/24-bit linear PCM mono recording
- WAV files (compatible with BWF format)
- Media: microSD/SDHC cards (supports 32GB capacities)
- Sliding record switch and hold function to prevent misoperation during recording
- Dual recording function
- automatic file closing function to prevent the loss of already recorded data
- XLR connector also can use as external input for external input
- High/Mid/Low recording level settings
- Low-cut filter
- Limiter
- Automatic level function
- With a built-in clock function, supports BWF files that can have time information added, which is convenient for editing and searching
- Time track incrementing function can create new files at regular intervals (every 15 minutes) during recording
- Playback function allows recorded data to be checked immediately
- Headphone output
- Locking mechanism assure a tight connection with the microphone body
- Easy-to-read organic EL display
- micro USB B port enables easy data exchange with computers
- Records at least 10 hours on a single AAA battery by using alkaline batteries (EVOLTA)
- Unit settings can be created and transferred as a computer text file
- Settings can be transferred between multiple DR-10X units using the infrared transmission function
- Firmware can be updated using a microSD card
- RoHS-compliant product
|
The new Fostex FR-2 has been designed specifically for location sound recording; high quality sound effects acquisition; TV & radio documentary; in fact any application where quality audio recording is required.
With excellent quality (up to 24-bit / 192KHz recording - a first for a CF recorder), huge feature list and a cost-effective price point, the FR-2 offers users of portable DAT and other formats the opportunity to make the switch to a more flexible, higher quality audio acquisition machine without sacrificing features.
- Recording industry standard, PC-compatible BWF files (stereo/mono) on a FAT32 media format
- Up to 24-bit/192kHz uncompressed recording
- Includes a unique 22.05kHz sampling frequency setting for extended recording
- Records to both Type I & II CompactFlash cards and PCMCIA 1.8” hard disk drives*1
- Fostexʼs "File per Take” system with auto scene & take naming/increment
- Two balanced XLR microphone inputs with switchable phantom power and top quality, high headroom mic pre-amps
- 132 x 64 dot matrix LCD screen for ease of use & high visibility in the field
- Uses AA-sized rechargeable NiMH batteries which are widely available due to the popularity of digital cameras. 8 AA cells will provide approximately 2.5 hours operation when recording to a CF card
- Easy file transfer to PC/Mac via PCMCIA, CF adaptor or standard on-board USB connection for data editing and/or backup*2
- Quick and easy on-board file naming or via external keyboard through standard USB keyboard port
- “Pre-record” loop buffer of approximately 10 seconds*3
- Easy software update via CF or PCMCIA card with downloads from the internet
- Optional timecode generator / reader card
Notes
*1 May require software update for PCMCIA HD operation
*2 Complies with Windows ME/2000/XP, Mac OS 10.2 or higher
*3 Varies depending on sampling frequency“
- GENERAL
Recording Media CompactFlash card, PCMCIA HD
Recording Format BWF
Number of Channels Stereo / Mono
Sampling Frequency 22.05 / 44.1 / 48 / 88.2 / 96 / 176.4 / 192kHz
Quantization 16 bit (22.05 - 48kHz), 24 bit (44.1 - 192kHz)
- PHYSICAL
Power Requirement 8 x AA type dry cell (NiMH recommended)
AC adaptor (optional)
DC 12V
Power Consumption approx. 5W
Dimension 250(W) x 77(H) x 220(D) mm
Weight 1.5kg (w/out battery)
- PERFORMANCE
R/P Frequency Response 20Hz to 10kHz +/-1dB (fs: 22.05kHz)
20Hz to 20kHz +/-1dB (fs: 44.1 / 48kHz)
20Hz to 40kHz +/-2dB (fs: 88.2 / 96kHz)
20Hz to 80kHz +/-3dB (fs: 176.4 / 192kHz)
S/N (ADC-DAC, 24-bit, ref: -20dB, fs:48kHz)
Line (input gain: +4dBu): 100dB (typical)
Mic: (input gain: -60dBu): 87dB (typical)
Dynamic Range 100dB (ADC-DAC, 24bit, ref:-20dB, fs:48kHz) typical
T.H.D. (ADC-DAC, 24-bit, ref:-20dB, fs:48kHz)
Line (input gain: +4dBu): Less than 0.005% (at 1kHz, -1dB typical)
Mic (input gain: -60dBu): Less than 0.008% (at 1kHz, -1dB typical)
Power Life approx. 2 hours 30 min. (8 x AA NiMH type/2300mAH)
- INPUT / OUTPUT CONNECTORS
ANALOG AUDIO INPUT L/R
Connector XLR-3-31 type (Pin2: Hot)
Line Input Impedance : More than 6k ohm
Reference Input Level +4dBu
Maximum Input Level +24dBu (Trim: +4dBu, at the prefader stage)
MIC
Input Impedance More than 6k ohm
Input Level -60dBu
Maximum Input Level -40dBu (Trim: +4dBu, at the prefader stage)
Phantom Power P48
ANALOG AUDIO OUTPUT L(Mono)/R
Connector RCA pin type
Output Load Impedance more than 10k ohm
Nominal Output Level +4dBu
HEADPHONE OUTPUT 50 + 50mW (32 ohm)
Max Speaker Output Level 1W
DIGITAL INPUT/OUTPUT (except for 176.4, 192kHz)
Connector XLR
Input Format S/P DIF / AES/EBU automatic
Output Format S/P DIF / AES/EBU switchable
USB x 2 (keyboard / PC only)
TIMECODE CARD (OPTIONAL, T.B.A.)
LTC Input/Output LEMO
Frame Rate 23.976/24/25/29.97DF/29.97ND/30DF/30ND
Gen Mode 24H RUN / REC RUN / FREE RUN / EXT RUN
| Uses a system of interchangeable input capsules that can be swapped out as easily as the lens of a camera
Includes detachable X/Y capsule (XYH-5) with extended signal capacity and shockmounted mics for reduced handling noise
Compatible with all Zoom input capsules
Four-track simultaneous recording
Large backlit LCD display
Records directly to SD and SDHC cards up to 32GB
Up to 24-bit/96kHz audio in BWF-compliant WAV or a variety of MP3 formats
Two mic/line inputs with XLR/TRS combo connectors, each with selectable phantom power and -20dB pad
Analog-style gain controls for each input
Protective "roll-bar" type covers prevent accidental movement of gain controls
Plug-in power (2.5 volts)
Built-in effects, including low-cut filtering, compression and limiting
Chromatic tuner and metronome
Auto-record, Pre-record and Backup-record functions mean that you'll never miss that perfect take
MS decoding
Multitrack to stereo internal mixdown
Normalize, Divide and Trim editing
Voice memo and up to 99 marks per recording
A/B loop playback
Variable playback speed and variable pitch without affecting playback speed
Multichannel and stereo USB audio interface for PC/Mac/iPad with loop back function
Mountable to DSLR or camcorder with optional HS-01 Hot Shoe Mount adapter
Uses two standard AA alkaline or NiMH rechargeable batteries
Over 15 hours of operation with alkaline batteries
GENERAL
Recording media:
SD card: 16MB to 2GB , SDHC card: 4GB to 32GB
Display:
Backlit LCD (128 x 64 pixels)
INPUTS
INPUTS L/R [XYH-5 X/Y mic]:
Mic type: Unidirectional
Sensitivity: -45 dB, 1 kHz at 1 Pa
Input gain: -∞ to 52 dB
Max sound pressure input: 140 dB SPL
MIC/LINE IN :
Connector: 1/8" stereo mini jack
Input gain: - ∞ to 52 dB
Input impedance: 2 k Ω or more
Plug-in power: 2.5V supported
Backup recording: -12dB lower than set L/R input gain
INPUTS 1/2:
Connectors: XLR / TRS combo jacks
(XLR: Pin 2 hot / TRS: Tip hot)
Input gain (PAD OFF): -∞ to 55.0 dB
Input gain (PAD ON): -∞ to 35.0 dB
Input impedance: 1.8 k Ω or more
Max input level: +22 dBu (PAD ON)
Phantom power: +12V /+24V /+48V
Equivalent Input Noise (EIN): -120 dBu or less
OUTPUTS
LINE OUT :
Connector: 1/8" stereo mini jack
Rated output level: -10 dBm
Output load impedance: 10k Ω or more
PHONE OUT :
Connector: 1/8" stereo mini jack
Output Level: 20 W +20 W into 32 Ω load
Built-in speaker:
400mw 8 Ω mono
RECORDING FORMATS
STEREO MODE:
WAV (BWF-compliant)
Sampling frequency: 44.1/48/96 kHz
Bit rate: 16/24 (Stereo)
Maximum simultaneous recording tracks: 2
MP3
Sampling frequency: 44.1kHz
Bit rate: 48/56/64/80/96/112/32/160/192/224/256/320kbps
MULTITRACK MODE:
WAV (BWF-compliant)
Sampling frequency: 44.1/48 kHz
Bit rate: 16/24 (Mono/Stereo)
Maximum simultaneous recording tracks: 6 (L/R + INPUT 1/2 + L/R backup)
USB
Mass Storage Class operation:
Class: USB 2.0 High Speed
Audio Interface operation: Multitrack mode:
Class: USB 2.0 High Speed
Sampling frequency: 44.1/48kHz
Bit rate: 16/24 bit
Inputs / Outputs: 4 / 2
Audio Interface operation: Stereo mode:
Class: USB 2.0 Full Speed
Sampling frequency: 44.1/48kHz
Bit rate: 16 bit
Inputs / Outputs: 2 / 2
USB bus powered operation possible
(iPad operation supported in Stereo mode only)
POWER REQUIREMENTS
AA size (LR6) battery x 2
AC adapter: AD-17 (DC5V/1A/USB-type) (optional)
USB bus power | An Easy-To-Use Portable Recorder with All New Mics and Breakthrough Wi-Fi Technology
The groundbreaking DR-22WL from TASCAM is the first portable recorder to include Wi-Fi for transport control, file transfer, and audio streaming to your smartphone or PC. Other innovations like the new Scene Dial make it easier than ever to capture great-sounding recordings and share them online. A set of stereo condenser microphones is arranged in true XY pattern for ideal stereo imaging. The eight-position Scene Dial selects recording settings for typical situations, or can be set to full manual for greater control.
Included in the DR-22WL is a Wi-Fi function for controlling its transport and transferring files to a smartphone or computer. A free app for iOS and Android controls the transport and transfers files for instant upload. For a recording beginner or experienced user looking for a great-sounding, portable recorder with Wi-Fi, the DR-22WL is the only choice. |
Reviews
There are no reviews yet.