Content |
- Supercardioid Polar Pattern
- Laminated Varimotion Diaphragm
- 70 Hz to 20 kHz Frequency Response
- High Feedback Suppression
The AKG D5 is a handheld supercardioid dynamic microphone designed to accurately capture vocals and instruments for artists and audio engineers in clubs, concert venues, and houses of worship. The laminated Varimotion diaphragm exhibits a frequency-independent supercardioid polar pattern for excellent off-axis rejection of audio across the frequency spectrum. This allows high-gain-before-feedback and reduces stage bleed through the mic. Handling noise is minimized via the dual-shock capsule mount while the integrated pop filter impedes plosives and wind noise.
The 70 Hz to 20 kHz frequency response and maximum SPL of 147 dB at 1% THD ensure reliable reproduction of various sources from loud vocals to punchy snares. The D5 boasts a rugged die-cast housing and a spring-steel, wire-mesh grille. It ships with a stand adapter and storage bag.
Rugged die-cast housing for tour-ready durability
Frequency-independent supercardioid polar pattern provides a focused pickup pattern for enhanced suppression of feedback and noise, allowing high-gain-before-feedback
Dual-shock mount protects the capsule and minimize handling noise
Integrated pop filter reduces plosives and wind noise
Patented AKG laminated Varimotion diaphragm accurately reproduces vocals and a variety of instruments
Microphone
Sound Field |
Mono |
Operating Principle |
Pressure Gradient |
Capsule |
Dynamic |
Polar Pattern |
Supercardioid |
Circuitry |
Solid-State |
Pad |
None |
High-Pass Filter |
None |
Performance
Frequency Range |
70 Hz to 20 kHz |
Maximum SPL |
147 dB SPL |
Impedance |
600 Ohms |
Load Impedance |
2000 Ohms |
Sensitivity |
2.6 mV/Pa |
Equivalent Noise Level |
18 dB A-Weighted |
Connectivity
Output Connectors |
1 x XLR 3-Pin |
Physical
Dimensions |
ø: 2.01 x L: 7.28" / ø: 51 x L: 184.91 mm |
Weight |
11.29 oz / 320 g |
|
In the tradition of the SM58?, the Beta 58A dynamic microphone has become a top choice among vocalists and touring sound professionals.
The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille. Typical applications for the Beta 58A include lead vocals, backup vocals and speech.
- Smooth, extended frequency response for outstanding sound for professional live vocal use
- Consistent supercardioid pattern provides the best gain-before-feedback among dynamic microphones
- Pneumatic shock mount reduces handling noise
- Frequency response: 50 to 16,000 Hz
-
Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
-
Uniform supercardioid pattern for high gain before feedback and superior rejection of off–axis sound
-
Neodymium magnet for high signal–to–noise output
-
Hardened steel mesh grille that resists wear and abuse
-
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
-
Minimally effected by varying load impedance
-
Legendary Shure quality and reliability
Transducer |
(Moving Coil, with Neodymium Magnet) Dynamic |
Polar Pattern |
Supercardioid |
Frequency Response |
50 Hz - 16 kHz |
Maximum Input Sound Level |
not specified by manufacturer |
Power Requirements |
None Dynamic, Requires No Phantom or Battery Power |
Output Impedance |
150 Ohms (290 Ohms Actual) |
Output Connectors |
XLR-3 Type |
Dimensions |
6.375 x 2" (162 x 51mm) LxDiameter |
Weight |
9.92 oz. (278 g) |
|
The MD 441 U is a microphone of exceptional quality: its acoustic properties come as close as possible to those of a condenser microphone. Accurate signal response and low distortion are ensured, even with the highest sound pressure levels. Surface:
all metal body with black leatherette finish, sound inlet basket: nickel plated.
Pick-up pattern : super-cardioid
Sensitivity in free field, no load : (1kHz) 1,8 mV/Pa +- 2 dB
Nominal impedance : 200 Ohm
Min. terminating impedance : 1000 Ohm
Dimensions : 270 x 33 x 36 mm
Weight : 450 g
| Dynamic largemembran-Microphone forBroadcast- and Syncronize-Studios and professionalPodcasting, internal Pop-Filter, Neodym Large membranCapsule (28 mm) cardiod, 40 Hz - 14 kHz, 115 dB SPL, Weight: 1.025g, Lenght: 215 mm, 520 mm diameter |
Offered in a convenient and cost-effective "three-pack," the Q6 gives you plenty of output and performance for a variety of situations.
3 Mics in a Foam Padded Hard Shell Case
High gain, low impedance design
Dynamic Neodymium mic element
Super Cardioid pickup pattern
Multi-axis shock mounted element
On/Off Switch
Hard Shell Carry Case for 3 mics
(3) Mic Clips included
|
- Tailored for Vocals & Speech
- Cardioid Polar Pattern
- Shock-Mounted Dynamic Cartridge
- 50 Hz to 15 kHz Frequency Response
The Shure 55SH Series II is a Unidyne cardioid dynamic microphone boasting a classic look and vocal-tailored sound for recording sessions, live stage applications, and on-camera use. The dynamic cartridge is shock-mounted to impede handling noise and vibrations transferred through your mic stand. The implementation of a cardioid polar pattern minimizes pickup of off-axis noise and ambience, yielding higher gain before feedback and attenuated stage bleed.
The mic delivers a frequency response of 50 Hz to 15 kHz with a gentle presence boost peaking at approximately 6.5 kHz. Its XLR 3-pin output ensures compatibility with most mixer inputs, microphone preamps, and portable PA systems. An on/off switch is provided for convenient muting of the mic between speeches or performances. The attached, self-tensioning, 5/8“-27 thread swivel mount can be tilted up to 45 degrees forward and 80 degrees backward. Chrome die-cast metal construction provides tour-worthy durability.
Classic Appearance
In addition to being a mic with solid audio characteristics for the studio and stage, the 55SH Series II makes a great prop microphone in video shoots, photos, and theater applications
Tailored Frequency Response
The 50 Hz to 15 kHz frequency response features a slight dip in the low-mid frequency range and a gentle rise from 1 to 10 kHz, making its sonic performance optimized for vocals, public address, and dialog
Cardioid Polar Pattern
The cardioid polar pattern is effective in minimizing sound pickup at the off-axis sections of the capsule, ensuring high gain before feedback
Shock-Mounted Cartridge
The dynamic capsule is shock-mounted for added protection against shock- and structure-born noise
Shure 55SH II Specs
Microphone
Sound Field |
Mono |
Operating Principle |
Pressure Gradient |
Capsule |
Dynamic |
Polar Pattern |
Cardioid |
Circuitry |
Solid-State |
Pad |
None |
High-Pass Filter |
None |
Performance
Frequency Range |
50 Hz to 15 kHz |
Impedance |
270 Ohms |
Sensitivity |
-58 dBV/Pa at 1 kHz |
Connectivity
Output Connectors |
1 x XLR 3-Pin |
Physical
Dimensions |
ø: 3.06 x L: 7.4" / ø: 77.8 x L: 188 mm |
Weight |
1.37 lb / 0.62 kg |
|
Reviews
There are no reviews yet.