FBT PSR-212MA 500W RMS ACTIVE FLOOR MONITOR

Powered 2 way floor monitor Biamped, Coaxial System, 500wrms LF Digital PWM Amp,150wrms HF Class G amp, Cobranet® ready, remote control capable via PC & software, RJ 45 Input & Thru Connectors Neutrik® XLR Inputs Link thru outputs, Built in Linkwitz-Riley Adjustable Range Crossover, 24 bit/ 48kHz A/D & D/A converters, 8 position DIP Switch, FIR Time Domain Phase Linearity Digital Equalization Circuitry. 12” Custom B&C Coaxial speaker with Concentric HF driver. 13 ply ¾”Baltic Birch Cabinet construction w/ Tour Grade black paint finish, FBTʼs ADAP® Component Protection Circuitry Frequency Response: 58Hz –20 kHz, Max. SPL 129.5 dB Dimensions: 20.75”” w x 14.40” h x 20.50”d, Net Wt. 67 lbs.

StageSource™ is designed to be the worldʼs most versatile loudspeaker system for musicians. Using six powerful DSP-based Smart Speaker modes, the StageSource L3m output is optimized for a variety of performance scenarios including front-of-house PA, floor monitor, personal PA, keyboard backline, acoustic guitar backline, or with a multi-effects guitar processor as a high-performance electric guitar speaker system. Onboard accelerometer and pole mount sensors automatically detect the speakerʼs orientation and set the Smart Speaker mode accordingly.

The 1,400-watt, 3-way, tri-amped speaker system and a dual-braced tour-grade plywood enclosure combine to deliver astounding power and reliability. The innovative multi-function design enables the L3m to be the perfect loudspeaker in a wide variety of applications including floor or stage-stacked, pole-mounted, horizontal as a floor monitor, Virtual Tilt-back for instrument backline or flown with the integrated M10 suspension points for installation.

The NX M12-A is a compact, lightweight two-way multipurpose loudspeaker system designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA.

It is equipped with a new 750 Watt Digipro digital amplifier and premium transducers components.
The low frequency section is a 12” woofer with a 1.75” voice coil diaphragm while the high section is a neodymium compression driver mounted to a constant directivity horn.

The NX M15-A is a high-efficiency, high output, two-way, wide dispersion active sound reinforcement system.

It benefits from the integration of 750 Watt Digipro digital amplifier power, control electronics and premium transducers components such as the 15” neodymium woofer with 3.5” high power voice coil.
The NX M15-A is the perfect balance between size and performance and it is smaller and lighter without compromising on performance.

The NX 10-SMA is equipped with new high power 400 W digital amplifier and a newly designed 10 " coaxial neodymium transducer that guarantees outstanding audio quality and definition as well as an extremely lightweight of the final system.
The NX 10-SMA can be also used as a portable PA system, thanks to the rugged powder coated steel pole mount installed on the side. In order to control the response of the speaker in such different applications, RCF has incorporated two special Equalization Modes:
- Floor, for stage monitoring;
- Free Field, for the use of the speakers as a stand-alone PA system.
Cabinet is made in Baltic Birch plywood, finished with an extremely resistant paint for an extensive use on the road.
An ergonomic side handle, integrated with the input panel, is provided for an easier transport of the speaker.

• • Main vocal stage monitor
• • Drum or keyboard monitor
• • Main PA in small venues

General Specs

• 800 Watt Peak, 400 Watt RMS digital bi-amplification
• 127 dB max spl
• 60° x 60° constant directivity horn
• 10" High power neodymium woofer, 2.5" voice coil
• 7 kapton dome, 1" exit, neodymium high frequency driver
• DSP processing, floor - fre field equalization, soft limiter and protection
• Combo xlr/jack input, xlr signal output

Acoustical Specs

• Frequency Response -3 dB:60Hz ÷ 20000 Hz
• Max SPL:127dB
• Horizontal coverage angle:60°
• Vertical coverage angle:60°
• Compression Driver:7 kapton dome, 1" exit, neodymium
• Woofer:10" neo high power woofer, 2.5" voice coil

Processor Section

• Limiter:Soft Limiter
• Controls:Freefield, floor

Amplifier Specifications

• Total power:800W PEAK
• High frequencies:200 W PEAK
• Low frequencies:600 W PEAK
• Total power:400W RMS
• High frequencies:100 W RMS
• Low frequencies:300 W RMS

Cabinet Specs

• Cabinet Material:Baltic Birch
• Handles:1 on side
• Pole Mount/Cap:yes
• Grille:steel

Size/Weight

• Height:324/12.7mm/inch
• Width:450/17.7mm/inch
• Depth:417/16.4mm/inch
• Net Weight:14,5/31.96kg/lbs

- 1000w RMS, 2000w peak,  power delivers clarity, punch and more than enough headroom for any - performance or practice space - Specially-voiced 12-inch woofer and high frequency compression driver deliver your drum sounds - with precise, full response across the entire frequency range without any artificial colouration - (2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator - XLR output to link another Strike Amp 12 or send your performance to another input device - Lightweight and flexible tilt-back cabinet design that can also be pole-mounted - Contour EQ switch to control your sound - Ground-Lift switch eliminates unwanted noise


Specifications:

• Output: Power 2000W (peak, 1300LF + 700HF), 1000W (continuous RMS, 650LF + 350HF)
• Low-Frequency: 12.0” (305mm) low-frequency driver, 3.0” (76mm) high-temperature voice coil
• High-Frequency: 1.4” (35mm) voice coil, neodymium-magnet high-frequency driver with precision waveguide
• Crossover Frequency: 2.0KHz
• Maximum SPL: 131dB (peak), 128dB (continuous) (dB-SPL @ 1m)
• Frequency Response: 53Hz – 20kHz (+3dB)
• Frequency Range: 46Hz – 22kHz (-10dB)
• Horn Coverage 90o horizontal x 60o vertical (nominal)
• Equalisation: Contour switch with low- and high-frequency +3dB boost

Connectors:
- (2) XLR/TRS 1/4” (6.35mm) combo inputs
- (1) XLR link output
- (1) IEC power cable input

• Controls Power switch, (2) volume control knobs (1 per input), EQ contour switch, ground-lift switch
• Indicators: (2) power LEDs (1 front-panel, 1 rear-panel), clip limiter LED
• Protection: Electronic clip, thermal & transducer overdrive
• Input Voltage: 100V~, 110–120V~, 220–240V~; 50/60Hz (switchable)
• Fuse: 100–120V T10AL AC250V 220–240V T5AL AC250V
• Consumption: 800W
• Enclosure: Trapezoidal, injection-molded polypropylene enclosure with perforated steel grille

Dimensions: (width x depth x height) 605 x 354 x 350mm
Weight: 16.3kg