Content |
Beef up your studio's low-end response
The LSR310S 200W Powered Subwoofer from JBL is a 200-watt Class-D subwoofer that has been optimized for use in JBL's 3 Series of speakers. The subwoofer is designed for use in music recording, mix, and post-production 5.1 applications. It features a 10-inch speaker and JBL's Slip Stream Port to provide a peak output of 113dB.
A selectable Extended Low Frequency (XLF) effect allows you to augment the low frequency response found in many dance clubs, allowing you use the LSR310S to provide a sonic picture of how your tracks will sound at the club. It also has a selectable input sensitivity and 3 crossover settings including 80Hz, XLF (120Hz), and external, allowing the use of an external crossover.
JBL LSR 310S Features:
- 200W Class-D Amplifier
- 113dB Peak Output
- 10" Speaker
- Slip Stream Bass Port
- Balanced XLR Input
- Extended Low Frequency Effects
- 3 Selectable Crossover Settings
|
Genelec SE7261A Active DSP Subwoofer brings the flexibility and accuracy of room response equalization to smaller production environment. At the heart of the Genelec SETM (Small Environment) DSP loudspeaker system is the SE7261A DSP subwoofer with DSP processing.
The SE7261A DSP subwoofer provides all necessary network connections to the host computer and supply extensive DSP resources through its eight AES/EBU high-passed channels to the 8130A active loudspeakers.
The proprietary GLM.SETMsoftware kit includes a measurement microphone, AutoCalTM function and other key features of the standard GLM software.
| 108 dB | | Main 19 - 100 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB) | | GLM tone controls | | 10“ | | 120 W | | H x W x D 527 x 462 x 363 mm | | 27 Kg (59 lb) | | 4 x XLR digital in
4 x XLR digital out
(8 channels AES/EBU) |
|
The Temblor T8 features an 8“, down-firing, glass-composite woofer which is powered by a Class AB amplifier that delivers 200 watts of power. It has a round, front-firing acoustic port, 1/4" TRS and RCA main inputs, and 1/4" TRS and RCA pass-through outputs to connect your top speakers.
The speaker also includes a continuously variable low-pass filter that can be set between 50 Hz to 130 Hz, and also has a switchable high-pass filter that removes content below 80 Hz from the full-range signal sent to your satellite speakers, allowing you to create a seamless crossover transition.
8-inch, downward-firing, glass-composite low-frequency transducer Round, rear-firing, bass-reflex acoustic port Polarity invert assures the sub is phase aligned with top speakers Internal damping and heat sink Integrated rubber feet for stable placement Technical SpecificationsInputs | 2x Balanced 1/4" TRS
2x Unbalanced RCA | Outputs | 2x Balanced ¼" TRS (full range with 80 Hz HPF option) 2x Unbalanced RCA (full range with 80 Hz HPF option) | Frequency Response | 30 Hz - 200 Hz | Low Pass Filter | 50 - 130 Hz (variable) | Signal to Noise Ratio | >98 dB (A weighted) | THD | 0.05% | Amplifier Power | 200 W peak, 100 W RMS | Power Consumption | 120 W | Amplifier Type | Class AB | Max Peak SPL | 104 dB at 1 m | Woofer | 8" glass-composite, downward-firing | Port | Rear-firing bass reflex (round) | Input Gain Adjustment | -30 to +6 dB | Polarity Reverse | 0 or 180° | Low Pass Filter | 50 Hz to 130 Hz | High Pass Filter | On/off | Protection | RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
External mains fuse
| Power | 100-120 V ~50/60 Hz or 220-240 V ~50/60 Hz | Cabinet | Vinyl-laminated MDF | Dimensions | 10.2 x 12.6 x 11.0" (260 x 320 280 mm) | Weight |
21.2 lb (9.6 kg)
|
|
Genelec 7260A Active DSP Subwoofer brings the flexibility and accuracy of room response equalization to an entirely new level. This powerful and precise low frequency monitoring solution is designed for modern 6.1 or 5.1 multi-channel systems as well as traditional stereo applications.
With its 19 Hz lower cut-off frequency, high sound pressure output capability and versatile digital bass management system, the 7260A adapts to all low frequency monitoring situations. The amplifier unit is integrated into the enclosure containing active DSP crossover filters, driver overload protection circuits and power amplifiers.
The built-in bass management system supports eight input and output channels (four XLR connectors) for AES/EBU formatted digital audio. The main channels crossover frequency can be adjusted between 50-100 Hz.The LFE channel input (input 4) features an adjustable 50 - 120 Hz low-pass filter and a 0/+10 dB sensitivity switch.
The Genelec Loudspeaker Manager (GLMTM) control network and software enhances further the performance of the 7260A: it features adjustment of levels, distance delays, phase and flexible room response improvement equalization with the reliable and robust AutoCalTM automated calibration system via the GLMTM control network.
The Genelec Laminar Spiral EnclosureTM (LSETM) bass reflex enclosure is made of sheet metal rolled into a spiral shape and clamped between sturdy MDF side panels.
This novel construction technique allows for a long reflex tube to be mounted into a small cabinet, which provides as a result excellent laminar flow characteristics with minimal turbulence noise.
| 108 dB | | Main 19 - 100 Hz (± 3 dB)
LFE 19 - 120 Hz (± 3 dB) | | 0 to -270° (90° steps) | | 10“ | | 120 W | | H x W x D 527 x 462 x 363 mm | | 27 Kg (59 lb) | | 4 x XLR digital in
4 x XLR digital out
(8 channels AES/EBU) |
|
12" Subwoofer
Our range of Subwoofers follows our policy of using only high quality components. This has enabled us to bring the best possible products to the market place. We have paid the highest attention to properly extend the frequency range of our speakers and put even more care into our subwoofer designs. Not only care, but also a lot of testing and abuse.
So you can rest assured that when you buy a TS (ThunderStorm) subwoofer from EVE Audio, you will be getting a first grade product that delivers adequate and precise control over the bass frequencies in your room, without any low-port noise distortion since all TS subwoofers have a passive radiator. Your system will sound as a whole, not just a sum of parts.
All subwoofers feature the powerful accurate and low distortion sound reproduction that is the hallmark of all EVE Audio studio monitors.
Tech Talk
Every ThunderStorm subwoofer has detailed controls like switchable satellite filters (full range and 80Hz), phase switch controls (0°, 180°). and variable subwoofer filter frequencies (60....140Hz) to let you tailor and adjust your ThunderStorm to your specific room.
The TS112 is our largest, "no-compromise" subwoofer. The highly efficient PWM amp is capable of 400 W of short term output power. The powerful amp, coupled with a large proprietary 12" woofer will guarantee you a clean frequency response down to 24Hz and up to 300Hz, for a maximum output power of 112 dB (SPL @ 1m). As with the highly efficient TS110, don't let your neighbours see you unloading this subwoofer into your house!
The included remote control will let you adjust not only the subwoofer's volume but also the complete stereo system's volume while sitting comfortably in your sweet spot.
All in all, the ThunderStorm subwoofers will make any system sound better and more complete.
As with every other EVE Audio subwoofer, you get balanced XLR In- and Outputs (Stereo In and Out, LFE In, LFE/Sub Out) for greater convenience.
Passive Radiator
The particularity of our extremely powerful and accurate subwoofer resides in the passive radiator used that replaces the common bass reflex tube. With this design all audible noise due to air turbulences disappear completely.
Unwanted disturbing pipe resonances (at lambda/2 and multiples) are eliminated, which are unavoidable when applying the principle of a two-sided pipe opening (bass reflex port). The suspension of the passive radiator has a restoring force underneath its tuning frequency and reduces inaudible excursions in the subsonic range. This in turn results in reduced intermodulation distortion in the working range.
The passive radiator allows a particularly low tuning or lower cut-off frequency in a very compact cabinet.
Frequency response curve
Product | TS112 | Description | Subwoofer | Dimensions (WxHxD) [mm] | 390 x 560 x 508 | Dimensions (WxHxD) [“] | 15.35 x 22.05 x 20 | Free-field frequency range (-3dB) | 24Hz - 300Hz | Woofer | 300mm/12“ | Maximum SPL @ 1m | 112dB | Number of amplifiers | 1 | Total short-term output power | 400W | Protection limiter | Yes | Settings |
| System volume (Satellite & Sub) | -inf. - +6dB | Subwoofer volume | -inf. - +6dB | Level-lock dip switch | Yes | Filter-lock dip switch | Yes | Input level dip switch | +7dBu/+22dBu | Phase inversion | 0°/180° | Switchable Satellite filter | flat/80Hz | Variable Subwoofer filter | 60Hz-140Hz + LFE | Remote control | Sys. & Sub. Vol. | Connectors |
| XLR in left (impedance) | (10k) | XLR in right (impedance) | (10k) | XLR in LFE (impedance) | (10k) | XLR out satellite left (impedance) | (10k) | XLR out satellite right (impedance) | (10k) | XLR out (LFE) (impedance) | (10k) | Power consumption |
| Standby | | Full output | 410VA | Misc. |
| Weight kg/lb. | 25.5 / 56.2 |
|
Product details
Woofer: | 10-inch black Glass-Composite Cone | Frequency response: | 20Hz - 200Hz | Crossover frequency: | 50Hz - 130Hz adjustable | Amplifier Power: | 300W | S/N Ratio (A weighted): | >95dB | THD + N @ Rated Power: | 0.08% | Inputs: | 2x XLR, 2x TRS, 2x RCA Connectors | Outputs: | 2x XLR, 2x TRS, 1x XLR balanced (Sub out) Connectors | Input Impedance: | 20 kOhm balanced, 10 kOhm unbalanced | Phase reverse: | 0 / 180° switch | Ground Lift switch: | On / Off | Bypass Footswitch: | On / Off | Available colors: | Red, Black | Net weight: | 17.6kg / 38.7lb | Net Dimensions: | L385 x W340 x H390 mm
L15.16 x W13.39 x H15.35 in |
|
Reviews
There are no reviews yet.