JBL JRX-225 2×15” 2-way Passive speaker 500W

567.99 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The JRX225 is a portable, dual fifteen-inch, two-way speaker system designed specifically for applications in live music performance and music playback. Features : Dual JBL low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more crosssectional wire area in the voice coil gap than round wire designs, for […]

 

Read more

The JRX225 is a portable, dual fifteen-inch, two-way speaker system designed specifically for applications in live music performance and music playback.

Features :

  • Dual JBL low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more crosssectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
  • JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver improves high frequency performance as well as system reliability.
  • The advanced network topology crossover design shapes frequency response and delivers coherent summation in the crossover region.
  • High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
  • Progressive TransitionTM high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
  • The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
  • SonicGuardTM protects the highfrequency driver from excess power without interrupting the performance.
  • Non-resonant, all-steel handles are used.
  • Attractive 18-gauge hexagon perforated, steel grille protects components from damage.

Specifications :

Power Rating   : 500 W / 2000 W

 

Frequency Range (-10 dB)   : 42 Hz – 18 kHz

 

Frequency Response (±3 dB)   : 62 Hz – 13 kHz

 

Sensitivity (1w/1m)   : 100 dB SPL

 

Nominal Impedance   : 4 ohms

 

Recommended Amplifier Power   : 500 W to 1000 W into 4 ohms

 

Maximum SPL   : 133 dB

 

Nominal Dispersion   : 90º x 50º

 

Crossover Frequency   : 2.2 kHz

 

Dimensions

(H x W x D)

  : 1092 mm x 464 mm x 432 mm
(43 in x 18.3 in x 17 in)

 

Weight   : 42.6 kg (94 lb)

 

High Frequency Driver   : JBL 2414H-C , 1″ exit compression driver mounted on Progressive TransitionTM Waveguide

 

Low Frequency Driver   : JBL M115-8A x 2

 

Input Connectors   : Neutrik® Speakon® NL-4 (x1); .25 in TS phone jack (x1); parallel

 

Grille   : 18-gauge, powder-coated steel
Weight 43.00 kg

Reviews

There are no reviews yet.

Be the first to review “JBL JRX-225 2×15” 2-way Passive speaker 500W”

Your email address will not be published. Required fields are marked *

Quick Comparison

JBL JRX-225 2x15'' 2-way Passive speaker 500W removeELECTRO VOICE TX1152 SPEAKER 2 WAY 500W removeJBL AM 7315/64-WRC 3-Way Full-Range Passive Loudspeaker 1450W removeJBL AM 7315/95-WRC 3-Way Full-Range Passive Loudspeaker 1450W removeELECTRO VOICE ZX5-60PI SPEAKER 2 WAY 600W removeRCF ART 725 ΜΚ4 Passive Speaker 2 WAY 15" 700W remove
NameJBL JRX-225 2x15'' 2-way Passive speaker 500W removeELECTRO VOICE TX1152 SPEAKER 2 WAY 500W removeJBL AM 7315/64-WRC 3-Way Full-Range Passive Loudspeaker 1450W removeJBL AM 7315/95-WRC 3-Way Full-Range Passive Loudspeaker 1450W removeELECTRO VOICE ZX5-60PI SPEAKER 2 WAY 600W removeRCF ART 725 ΜΚ4 Passive Speaker 2 WAY 15" 700W remove
Image
SKUJRX 225004154AM 7315/64-WRCAM 7315/95-WRC001984ART725 MK4
Rating
Price 567.99 incl. GR VAT 1,080.00 incl. GR VAT 5,438.00 incl. GR VAT 5,438.00 incl. GR VAT1,227.20 incl. GR VAT 1,238.75 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Only 2 left in stock (can be backordered)

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderOnly 2 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThe JRX225 is a portable, dual fifteen-inch, two-way speaker system designed specifically for applications in live music performance and music playback. Features :
  • Dual JBL low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more crosssectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
  • JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver improves high frequency performance as well as system reliability.
  • The advanced network topology crossover design shapes frequency response and delivers coherent summation in the crossover region.
  • High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
  • Progressive TransitionTM high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
  • The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
  • SonicGuardTM protects the highfrequency driver from excess power without interrupting the performance.
  • Non-resonant, all-steel handles are used.
  • Attractive 18-gauge hexagon perforated, steel grille protects components from damage.
Specifications :
Power Rating   : 500 W / 2000 W
 
Frequency Range (-10 dB)   : 42 Hz - 18 kHz
 
Frequency Response (±3 dB)   : 62 Hz - 13 kHz
 
Sensitivity (1w/1m)   : 100 dB SPL
 
Nominal Impedance   : 4 ohms
 
Recommended Amplifier Power   : 500 W to 1000 W into 4 ohms
 
Maximum SPL   : 133 dB
 
Nominal Dispersion   : 90º x 50º
 
Crossover Frequency   : 2.2 kHz
 
Dimensions (H x W x D)   : 1092 mm x 464 mm x 432 mm (43 in x 18.3 in x 17 in)
 
Weight   : 42.6 kg (94 lb)
 
High Frequency Driver   : JBL 2414H-C , 1" exit compression driver mounted on Progressive TransitionTM Waveguide
 
Low Frequency Driver   : JBL M115-8A x 2
 
Input Connectors   : Neutrik® Speakon® NL-4 (x1); .25 in TS phone jack (x1); parallel
 
Grille   : 18-gauge, powder-coated steel

The Electro-Voice TX1152 Tour-X is a high power, high sensitivity, 15" 2-way PA loudspeaker system to use when high-quality sound reinforcement is required in a lightweight package.

The TX1152 PA speaker uses a DH3, high output 1.25" titanium compression driver, coupled to a Constant Directivity 60 degree x 40 degree horn. This combination results in a smooth response to 20 kHz and excellent pattern control in medium throw applications.

The SMX2151 15" woofer has an FEA optimized magnet structure and a shorting ring for ultra low distortion and maximum intelligibility at high SPL levels. The crossover uses steep 24 dB/octave slopes with equalization for very smooth response in vocal range, extended HF, and a protection circuit for long-term reliability.

The TX1152 has a variety of features that make it equally suited for portable or fixed installation applications. The trapezoidal enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoat for maximum strength while still remaining lightweight. The unique grille design is very strong, dent resistant, and features a rotatable logo. Four way handles allow for gripping in a variety of positions, a pole mount allows for placement on a subwoofer or a tripod. Six 3/8" threaded points allow a single TX1152 to be suspended in a various positions. The recessed input panel with dual NL4 connectors panel keeps the connectors hidden, while allowing the TX1152 to be used with the TX1181 subwoofer for extended sub bass on a single amplifier channel, with no additional processing needed.

 Ειδική έκδοση του AM 7315/64 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
14 σημείων. Πιστοποίηση IP55 κατά πρότυπο IEC
529. Παράδοση κατόπιν παραγγελίας.

Ηχείο 3-Way Full-Range υψηλής ισχύος 1450W
κατασκευασμένο από πολύφυλλo ξύλο συμήδας
και επένδυση Duraflex. Απόκριση συχνοτήτων:
38 Hz - 20 kHz. Ευαισθησία: LF: 127dB-SPL cont
avg (133 dB peak) Tri-amp mode: MF: 133dBSPL
cont avg (139dB peak) HF: 135dB-SPL cont
avg (141dB peak) Bi-amp mode: MF/HF: 133dBSPL
cont avg (139dB peak) με woofer 15" 2265H
LF: 1000W (4000W peak), 2 hrs, 750 W (3000
W peak), 100 hrs JBL Differential Drive® διπλού
πηνίου 75mm (3-in). Driver μεσέων συχνοτή των
CMCD-82H 8" MF: 350 W (1400W peak), 2 hrs
με ενσωματωμένο περιστρεφόμενο κυματοδηγό
και 2432H driver υψηλών συχνοτήτων HF: 100
W (400 W peak), 2 hrs με στόμιο χοάνης 38mm
(1.5 in), πηνίο φωνής 75mm(3 in) και διασπορά
χοάνης. 60° x 40°. Δυνατοτητα διενίσχυσης/
τριενίσχυσης με διακόπτη. Διατίθεται και σε
λευκό χρώμα (-WH). Διαθέτει υποδοχές (13 x
M10) για eyebolts σε χρήση μόνιμων
εγκαταστάσεων (διατίθονται σαν option). Eπίσης
μπορεί να δεχτεί το Planar Array Frame kits PAF-
2K and PAF-3K για κρέμαση πολλαπλών ηχείων
(option). Χρήσεις: PA, θέατρα, Disco/Club,
Aμφιθέατρα, Αθλητικές Εγκαταστάσεις, θεματικά πάρκα κλπ.
Διαστάσεις ΥΠΒ 967 x 561 x 657 mm. Βάρος
45,8 κιλά.

Ειδική έκδοση του AM 7315/95 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
14 σημείων. Πιστοποίηση IP55 κατά πρότυπο IEC
529. Παράδοση κατόπιν παραγγελίας.
     

Frequency Range       :       38 Hz - 19 kHz (-10 dB)

Frequency Response       :       45 Hz - 17 kHz ( ± 3 dB)

Coverage Pattern       :       90°x 50°, rotatable waveguide

Directivity Factor (Q)       :       10

Directivity Index (DI)       :       10 dB

Crossover Modes       :       Tri-amp / Bi-amp switchable

Passive Crossover Slopes       :       MF/HF Section in Bi-amp mode: 4th order (24 dB/oct) Linkwitz-Riley HP & LP, 2.1 kHz

Transducer Power Rating (AES)       :       LF: 1000 W (4000 W peak), 2 hrs
600 W (2400 W peak), 100 hrs
MF: 350 W (1400 W peak), 100 hrs
HF: 75 W (300 W peak), 2hrs

Long-Term System Power Rating (IEC)       :       LF: 600 W (2400 W peak), 100 hrs
MF/HF: 350 W (1400 W peak), 100 hrs

Maximum SPL       :       LF: 125 dB-SPL cont avg
(131 dB peak)
Tri-amp mode:
MF: 133 dB-SPL cont avg
(139 dB peak)
HF: 132 dB-SPL cont avg
(138 dB peak)
Bi-amp mode:
MF/HF: 132 dB-SPL cont avg
(138 dB peak)

System Sensitivity of Passive Sections 6       :       MF/HF Section in Bi-amp mode: 108 dB SPL (1W @ 1m)
 

The Zx5 is a 15-inch, 2-way cabinet with the most elegant high-impact composite enclosure, featuring the newest generation of EV components: the all-new DXV3150, 500W, 15-inch woofer and the all-new 2-inch neodymium ND2 compression driver. The Zx5 is rated for 600 watts long-term power handling and is able of producing high SPLs whilst providing a very smooth frequency response. With two available coverage patterns (60-degrees x 60-degrees or 90-degrees x 50-degrees), two adjustable monitor angles (45- or 55-degrees) and ten built-in rigging and suspension points allowing for a variety of mounting accessories, the Zx5 fits a variety of applications: installations of individual speakers or clusters in entertainment, cultural or religious venues, as well as on stages with bands, musicians and P.A. rental companies. Specifications Frequency Response (-3dB) 52 - 16000 Hz Recommended High-Pass Frequency 36 Hz Sensitivity 1W/1m 98 dB Max. SPL / 1m (calc); full space 132 dB Coverage (nominal -6dB) H° 60 ° Coverage (nominal -6dB) V° 60 ° System Power Handling (continuous/program/peak) 600/1200/2400 Watts Crossover Frequency 1500 Hz Nominal Impedance (Passive) 8 Ohms Minimum Impedance 6.5 Ohms Input Connections Four-pin Speakon (2) Chassis Size 15 inches Weight Net 22.5 kg ( 49.6 lbs ) Dimensions (HxWxD) 692 x 446 x 411 mm (27.24" x 17.56" x 16.18

  • 1.4" compression driver with 3" voice coil
  • 15" woofer, high power, 3.5" voice coil
  • 133 dB max spl
  • Input Power Rating: 650 W AES
ART 725 MK4 is a passive two-way system with an accurate acoustic design for club installations and live music. Thanks to the high quality compression driver with a 3” voice coil and the 15” woofer, the ART 725 MK4 delivers clear high frequencies, punchy bass and full and precise mid frequencies. The new aluminium rear panel is equipped with Speakon in/out connectors. Specifications Acoustical specifications Frequency Response (-10dB): 55 Hz ÷ 20000 Hz Max SPL @ 1m: 133 dB Horizontal coverage angle: 90° Vertical coverage angle: 60° System Sensitivity: 99 dB Power section Crossover frequencies: 1400 Transducers Compression Driver: 1.4'' neo, 3.0'' v.c Nominal Impedance (Ohm): 8 ohm Input Power Rating: 110 W AES, 220 W PEAK Sensitivity (dB, 1W @ 1m): 109 dB, 1W @ 1m Woofer: 15'' neo, 3.5'' v.c Nominal Impedance (Ohm): 8 ohm Input Power Rating: 650 W AES, 1300 W PEAK Sensitivity (dB, 1W @ 1m): 98 dB, 1W @ 1m Input/Output section Input connectors: Speakon Output connectors: Speakon Standard compliance CE marking: Yes Physical specifications Cabinet/Case Material: PP Composite Hardware: 2 x M10 Handles: 1 Top, 2 Side Pole mount/Cap: Yes Grille: Steel Color: Black Size Height: 708 mm / 27.87 inches Width: 437 mm / 17.2 inches Depth: 389 mm / 15.31 inches Weight: 20.5 kg / 45.19 lbs Shipping informations Package Height: 725 mm / 28.54 inches Package Width: 550 mm / 21.65 inches Package Depth: 505 mm / 19.88 inches Package Weight: 23.7 kg / 52.25 lbs
Weight43.00 kg27.80 kg48.50 kg48.50 kg22.20 kg22.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 43.00 kg
Weight 27.80 kg
Weight 48.50 kg
Weight 48.50 kg
Weight 22.20 kg
Weight 22.00 kg