TOA WT-5800 UHF Wireless Tuner

408.63 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The wireless tuner WT-5800 is a PLL-synthesizer controlled double superheterodyne true diversity tuner to be used in UHF wireless systems. It employs a compander noise reduction circuit to minimize the influence of the ambient RF noise. Specification (*1) 0 dB = 1 V Power Source AC mains (supplied AC adapter must be used) Power Consumption […]

 

Read more

The wireless tuner WT-5800 is a PLL-synthesizer controlled double superheterodyne true diversity tuner to be used in UHF wireless systems. It employs a compander noise reduction circuit to minimize the influence of the ambient RF noise.

Specification

(*1) 0 dB = 1 V

Power Source AC mains (supplied AC adapter must be used)
Power Consumption 250 mA (12 V DC)
Receiving Frequency 636 – 865 MHz(*2), UHF
Channel Selectable 64 selectable frequencies
Receiving System Double super-heterodyne
Diversity System Space diversity (true diversity)
Mixing Output MIC: -60 dB(*1), 600 Ω, balanced, XLR-3-32 type connector
LINE: -20 dB(*1), 600 Ω, unbalanced, phone jack
Mixing Input -20 dB(*1), 10 kΩ, unbalanced, phone jack
Antenna Input 75 Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max)
Antenna Output 75 Ω, BNC (Gain 0 dB)
Receiving Sensitivity 90 dB or more, S/N ratio (20 dBμV input, 40 kHz deviation)
Squelch Sensitivity 18 – 40 dBμV variable
Squelch System Using together of noise SQ, carrier SQ and tone SQ
Tone Frequency 32.768 kHz
Indicator Audio (6 step), RF (6 step), ANT A/B, Audio (peak), Battery alarm
Channel Check Usable frequencies scanning
S/N Ratio 110 dB or more (A-weight, unbalanced output)
Harmonic Distortion 1 % or less (typical)
Frequency Response 100 Hz – 15 kHz, ±3 dB
Operating Temperature -10 ℃ to +50 ℃
Finish Resin, black
Dimensions 210 (W) × 44 (H) × 205.1 (D) mm
Weight 700 g
Accessory AC adapter(*3) …1, Wireless antenna …2
Option Mounting bracket kit: MB-WT3 (for rack mounting one WT-5800 unit)
MB-WT4 (for rack mounting two WT-5800 units)

 

Weight 0.70 kg

Reviews

There are no reviews yet.

Be the first to review “TOA WT-5800 UHF Wireless Tuner”

Your email address will not be published. Required fields are marked *

Quick Comparison

TOA WT-5800 UHF Wireless Tuner removeTOA IR-702T Infrared Wireless Tuner removeAKG DSR TETRAD Digital microphone 4 channel receiver removeTOA IR-520R Infrared Wireless Receiver removeShure ULXP4 Professional Wireless Receiver removeShure UR5 Portable Diversity Receiver remove
NameTOA WT-5800 UHF Wireless Tuner removeTOA IR-702T Infrared Wireless Tuner removeAKG DSR TETRAD Digital microphone 4 channel receiver removeTOA IR-520R Infrared Wireless Receiver removeShure ULXP4 Professional Wireless Receiver removeShure UR5 Portable Diversity Receiver remove
Image
SKUWT-5800IR-702TDSR TETRADIR-520RULXP4UR5
Rating
Price 408.63 incl. GR VAT 335.00 incl. GR VAT 727.00 incl. GR VAT 104.00 incl. GR VAT 750.04 incl. GR VAT 1,009.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The wireless tuner WT-5800 is a PLL-synthesizer controlled double superheterodyne true diversity tuner to be used in UHF wireless systems. It employs a compander noise reduction circuit to minimize the influence of the ambient RF noise.

Specification
(*1) 0 dB = 1 V
Power Source AC mains (supplied AC adapter must be used)
Power Consumption 250 mA (12 V DC)
Receiving Frequency 636 - 865 MHz(*2), UHF
Channel Selectable 64 selectable frequencies
Receiving System Double super-heterodyne
Diversity System Space diversity (true diversity)
Mixing Output MIC: -60 dB(*1), 600 Ω, balanced, XLR-3-32 type connector
LINE: -20 dB(*1), 600 Ω, unbalanced, phone jack
Mixing Input -20 dB(*1), 10 kΩ, unbalanced, phone jack
Antenna Input 75 Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max)
Antenna Output 75 Ω, BNC (Gain 0 dB)
Receiving Sensitivity 90 dB or more, S/N ratio (20 dBμV input, 40 kHz deviation)
Squelch Sensitivity 18 - 40 dBμV variable
Squelch System Using together of noise SQ, carrier SQ and tone SQ
Tone Frequency 32.768 kHz
Indicator Audio (6 step), RF (6 step), ANT A/B, Audio (peak), Battery alarm
Channel Check Usable frequencies scanning
S/N Ratio 110 dB or more (A-weight, unbalanced output)
Harmonic Distortion 1 % or less (typical)
Frequency Response 100 Hz - 15 kHz, ±3 dB
Operating Temperature -10 ℃ to +50 ℃
Finish Resin, black
Dimensions 210 (W) × 44 (H) × 205.1 (D) mm
Weight 700 g
Accessory AC adapter(*3) …1, Wireless antenna …2
Option Mounting bracket kit: MB-WT3 (for rack mounting one WT-5800 unit)
MB-WT4 (for rack mounting two WT-5800 units)

 

The IR-702T is a 2-channel infrared wireless tuner employing a fixed frequency system. This tuner is combined with an infrared wireless microphone and an infrared wireless receiver to make up the infrared wireless microphone system. The infrared microphone system eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms.

Specification
(*1) 0 dB = 1 V
Power Source AC mains, 50/60 Hz (supplied from the included AC adapter)
Power Consumption 15 W or less
Receiving Frequency Channel A: 3.100 MHz
Channel B: 3.350 MHz
Receiver Sensitivity S/N ratio: 50 dB or more
(40 dBμV input, 1 kHz modulation, ±4.8 kHz deviation)
S/N Ratio 61 dB or more (60 dBμV input, ±4.8 kHz deviation, A-weighted)
Tone Squelch Frequency 32.768 kHz
Infrared Receiver Input 75 Ω, BNC jack × 2 (Infrared wireless receiver's power source: 24 V DC,
220 mA max. in total of 2 terminals)
Output Channel A and B: -10 dB(*1) (±4.8 kHz deviation, at volume level max.),
600 Ω, electrical balanced, 3 pole phone jack.
Note: Channel A switchable to mixer output.
Frequency Response 100 Hz - 12 kHz
Operating Temperature -10 ℃ to +50 ℃ (14 ゜F to 122 ゜F)
Operating Humidity 30 % to 85 %RH
Finish Case: ABS resin, black
Dimensions 210 (W) × 44 (H) × 210.9 (D) mm (8.27" × 1.73" × 8.3“)
Weight 630 g (1.39 lb) (unit only)
Accessory AC adapter(*2) …1, AC Power cord (2 m (6.56 ft))(*2) …1,
Cord with a phone plug (1 m (3.28 ft)) …1, Color label (6 colors) …1,
Rubber foot …4
Option Rack mounting bracket: MB-WT3
MB-WT4 (for mounting with the optional IR-700D
together)

 

Info

Digital microphone 4 channel receiver.

The IR-520R Infrared Wireless Receiver is designed for exclusive use with the IR-702T Infrared Wireless Tuner. It can be mounted to a wall or a microphone stand.

Specification
Power Source 24 V DC (supplied from the IR-702T)
Current Consumption Max. 30 mA
Infrared Detector
Wavelength 870 nm
Carrier Frequency Channel A: 3.100 MHz
Channel B: 3.350 MHz
Reception Area Approx. 15 m (50 ft) in a space without any obstacles
Connection Terminal 75 Ω, BNC jack
Operating Temperature 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F)
Operating Humidity 30 % to 85 %RH
Finish Filter section: Polycarbonate, optical cut filter
Dimensions 84.5 (W) × 63.5 (H) × 32 (D) mm (3.33" × 2.5" × 1.26“)
Weight 100 g (0.22 lb) (unit only)
Accessory Stand mounting bracket …1, Bracket mounting screw …2

 

Shure ULXP4 Professional Wireless Receiver

The Shure ULX? Professional wireless receiver offers an exceptional value in both performance
and price, for both working musicians and sound installers. The expanded feature set of the ULXP4
wireless receiver, with advanced settings and controls including lockable settings and group scan
offers a direct path to full, clear audio signals.

Features:

Automatic Frequency Selection with group scan function
Over 1400 selectable frequencies
Predictive Diversity
5-segment transmitted audio signal strength meter
5-segment RF meter
3-segment transmitter battery fuel gauge
Advanced multi-function LCD displays group and channel
Mic/Line switch
Remotable 1/2-wave antenna
Frequency and volume lockout
XLR and 1/4-inch output
Rugged metal chassis
1/2 rack design

The UR5 is a premium portable wireless receiver component, designed to provide Shure UHF-R®-class technology, performance, and quality for professional broadcast and media production applications. Featuring wide-band frequency tuning, hands-on navigation, rechargeability, and a variety of mounting options, the UR5 is the clear choice for wireless portability.



RF Carrier Range
470–952 MHz (varies by region)

Modulation
FM, ±45 kHz maximum deviation

Antenna
Switching diversity

Dynamic Range    
>100 dBm=, A-weighted

RF Sensitivity
-106 dBm for 12 dB SINAD,
-88 dBm for 30 dB SINAD

Image Rejection
>100 dB (typical)

Spurious Rejection (ref. 12dB SINAD)
>80 dB (typical)

Squelch Threshold
30 dB SINAD (±3 dB) normal setting

Compatible Channels
Per band: 40 (band dependent)

Tuning Bandwidth
60–72 MHz (band dependent)

Frequency Stability
±2.5 ppm

Pilot Tone
UHF-R® Mode: 32 kHz tone key pilot
Axient Mode: 28 kHz tone key pilot

Audio Frequency Response
50 Hz-16 kHz

Ultimate Quieting
>100 dBm=, A-weighted

Total Harmonic Distortion (ref. ±20 kHz deviation @1 kHz)

Weight0.70 kg0.63 kg2.00 kg0.10 kg1.10 kg0.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.70 kg
Weight 0.63 kg
Weight 2.00 kg
Weight 0.10 kg
Weight 1.10 kg
Weight 0.30 kg