Content |
HF Unit: 25mm neodymium tweeter with high dispersion diaphragm. Ferrofluid cooled and damped. Magnetically shielded. Exclusively Profiled.
MF Unit: 110mm mid range driver with 32mm long-throw voice coil, die cast chassis, high power, magnet system and lightweight alloy cone. Magnetically shielded.
LF Unit: 110mm mid/bass driver with 32mm long-throw voice coil, die cast chassis, high power, magnet system and lightweight alloy cone. Magnetically shielded.
Power Handling: 150 watt max
Overall Frequency Response: 55Hz – 23kHz
Sensitivity: 90dB
Impedance: 8 ohms
Cabinet: Real wood veneered. 15mm MDF wrap. Dual chamber. High power, back firing, low turbulence bass reflex port. 22mm front baffle
Terminals: Gold-plated 4-way binding posts
Dimensions: WxHxD 450 x 180 x 297 mm
Weight: (exc packaging) 8kg each
|
Frequency Response: 32 Hz - 100 KHz Sensitivity (1W@1M): 90 dB Nominal Impedance: 4 Ohms Maximum S.P.L (Per pair in room): 117.8 dBA Power Handling (RMS): 250 W Recommended Amplifier Requirements (RMS): 100 - 250 W Bass Alignment: Twin Ported HiVe II Technology Sealed Mid-range TLE Mid / H.F Crossover Frequency: 4000 Hz Bass Low Pass Crossover Frequency: 550 Drive Unit Complement: 2 x 8 long-throw RDT bass drivers 1 x 4" RDT Mid-range driver 1 x C-CAM high frequency ribbon transducer External Dimensions - Excluding Stand (H x W x D): 288 x 800 x 368 mm (11 5/16 x 31 1/2 x 14 1/2 inch) Stand External Dimensions - Including Plinth Feet (H x W x D): 335 x 610 x 463 mm (13 13/16 x 24 x 18 1/4 inch) Weight: 33.5 Kg (73.8lbs) User's Manual AVAILABLE IN THESE COLOR FINISHES
|
The perfect complement to a full SX-series surround sound speaker set, the Cambridge Audio SX70 is the natural choice. CRISP AND CLEAR SOUND FOR ARTICULATE VOCALS Featuring a silk dome tweeter, the Cambridge Audio SX70 offers a smooth response that\'s essential for clear, accurate dialogue. Even during intense scenes in action movies, the dialogue can still clearly be heard. TWIN WOOFERS FOR BROAD STAGING Using two woofers, placed either side of the tweeter, gives the SX70 a wide soundstage, meaning that it connects up with your front speakers seamlessly. Now, when a jet aircraft rushes across the screen, the sound will follow from left to centre to right without a break. TOP QUALITY CONSTRUCTION FOR LASTING APPEAL Made from dense, MDF (Medium Density Fibreboard) rather than flimsy chipboard, the SX70s are built to last. That solid construction also has a knock-on effect in helping to improve the sound quality through higher cabinet rigidity. Other neat design features that we love include the recessed drive units with hidden fixing bolts, making sure the front the panel looks every bit as smooth as the sound. PART OF THE SX-SERIES AND SO IDEAL FOR SURROUND SOUND SYSTEMS With floorstanding and standmount sound speakers available, the Cambridge Audio SX70 is ideal as part of a surround sound speaker system. With a similar sonic balance to the other SX-series speakers you get a smooth, uniform sound right the way around your room for a totally enveloping sound.
Magnetically Shielded |
Are they magnetically shielded? Allows speaker to be placed near a CRT TV/Monitor or sensitive magnetically stored data without the risk of damage. |
|
Sensitivity (dB) |
The higher this figure is the easier the speaker is to drive and, hence, requires a less powerful amplifier |
85 |
Impedance (ohms) |
Resistance. A standard figure is 8ohms |
8 |
Bi-wireable |
Is it bi-wirable? Separate earthing cables for tweeter and woofer units - gives a more precise sound when used with bi-wire cable |
|
Power Rating (Watts) |
Maximum power output long term/short term (RMS) |
100 |
Dimensions |
Dimensions of speaker cabinet (W x D x H) in mm |
360w x 246d x 138h |
Weight |
Weight of speaker, unboxed, in KG |
4 |
Black |
Does the speaker come in a black finish? |
|
Wood |
Does the speaker come in a wood or wood style finish? |
|
Other Colour |
Does the speaker come in another coloured finish? |
|
Freq Response (Hz) |
The lower the first figure the deeper the bass should be |
65 - 20,000 |
Speaker Enclosure Type |
Type of speaker enclosure. Infinite baffle cabinets are sealed and so are often less fussy about placement. Usually they do require a little more power to drive, though. Bass reflex speakers are usually more efficient than infinite baffle designs but may require more care in terms of placement. Rear port designs, in particular, usually need at least 15-30cm (6 - 12 inches) between them and the wall behind, for a balanced bass response. ABR = Auxcillary Bass Radiator (looks like a standard bass cone but without power) |
Infinite baffle (sealed) |
|
Power Handling (RMS / Max.)
75 / 150 watts
Sensitivity (2.8V/1m)
90 dB
Impedance
4 – 8 Ohms
Frequency Response
40 - 34000 Hz
Recommended Amplifier Output
20 - 150 Watts
Dimensions (WxHxD)
420 x 145 x 195 mm
Weight
4.9 kg
| Frequency Response +/- 3dB: 50Hz - 35KHz
Sensitivity (1W@1M): 90dB
Driver Compliment: 2 x 140mm (5 1/2“) C-CAM® mid/bass driver with RST® technology.
1 x 25mm (1“) C-CAM® gold dome tweeter.
Nominal Impedance: 8 ohms
Maximum SPL (each): 116.8 dBA
Recommended Amplifier Requirements (RMS): 50 - 200W
Bass Alignment: Bass reflex - twin front mounted Dual HiVE®II ports
Power Handling (RMS): 200W
Crossover Frequency: 600Hz & 3.0kHz
External Dimensions:
(H x W x D) 610 x 140 x 100 mm
24 x 5 1/2 x 3 15/16 inch
Weight (Individual): 6.85kg (15 1/8lbs)
User's Manual
ΔΙΑΤΙΘΕΤΑΙ ΣΤΑ ΠΑΡΑΚΑΤΩ ΧΡΩΜΑΤΑ
|
HF unit
25mm neodymium tweeter with high dispersion diaphragm. Ferro fluid cooled and damped. Magnetically shielded.
MF unit
150mm mid range driver with 32mm coil, die-cast chassis, high-power, long-throw magnet system and light weight alloy cone. Magnetically shielded.
LF unit
150mm bass driver with 32mm coil, die-cast chassis, high-power, long-throw magnet system and light weight alloy cone. Magnetically shielded.
Power Handling 150W max
Frequency response +/-6db 55Hz to 23kHz
Sensitivity 90 db/W
Impedance 8 ohms
Cabinet Real wood veneered. 15mm MDF wrap with 30mm MDF front baffle. High power, low turbulence, front firing bass reflex ports.
Terminals Gold-plated 2-way binding posts.
Weight
(excl. packaging) 8kg
Dimensions
Width 530mm
Height 170mm
Depth 196 mm
|
Reviews
There are no reviews yet.