ACOUSTIC ENERGY Aelite 3 3WAY FLOOR LOUDSPEAKER 175W -PAIR-

HF Unit: 25mm neodymium tweeter with high dispersion diaphragm. Ferrofluid cooled and damped. Magnetically shielded. Exclusively Profiled.

MF Unit: 110mm mid range driver with 32mm short throw voice coil, die cast chassis, high power, magnet system and lightweight alloy cone. Magnetically shielded.

LF Unit: Twin 125mm mid/bass drivers with 26mm voice coil, die cast chassis, high power, magnet system and lightweight alloy cone. Magnetically shielded.

Power Handling: 175 watt max

Overall Frequency Response: 34Hz – 27kHz

Sensitivity: 89dB

Impedance: 8 ohms

Cabinet: Real wood veneered. 15mm MDF wrap. Twin vented horizontal bracing. High power, back firing, low turbulence bass-reflex ports. 22mm front baffle.

Terminals: Gold-plated 4-way binding posts

Dimensions:  WxHxD 230 x 920 x 297mm

Weight:  (exc packaging) 18kg each

Two way, double reflex
2 x Woofer 130 mm.
Covered paper, double magnet
Tweeter 24 x 50 mm.
Isodynamic mylar diaphragm
Impedance: 8 Ohm (min. 6,5)
RMS Power: 100 W
MAX Power: 150W
Efficiency: 90 dB/W/1m
Dimensions: 170x1080x260mm.
Weight: 17 Kg.
Finish: rosewood, black oak

System Format:    3 Way Frequency Response:    30 Hz - 60 kHz Sensitivity (1W@1M):    90 dB Nominal Impedance:    8 ohms Maximum S.P.L (Per pair in room):    116.8 dBA Power Handling (RMS):    200 W Recommended Amplifier Requirements (RMS):    100 - 200 W Bass Alignment:    Bass reflex. HiVe port system Crossover Frequency:    L.F - M.F: 790 Hz M.F - H.F: 2.3 kHz Drive Unit Compliment:    2 x 6.5" RST bass driver 1 x 4" RST mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions excl Stand (H x W x D) 1060 x 210 x 330 mm (41 3/4 x 8 1/4 x 13 inch) Weight (each) Excluding stands:    27.2 Kg (59.9 lbs)

Single Ported HiVe® II technology
Sealed Mid-range TLE®
2 x 6.5” long-throw RDT® bass drivers
1 x 4” RDT® mid-range driver
1 x C-CAM® high frequency ribbon transducer
All cabinet finishes have hand-upholstered front baffles in Ingleston Black premium grade leather.
Finish options: Santos Rosewood veneer with clear gloss piano lacquer
Ebony veneer with clear gloss piano lacquer
Piano black gloss
Optional dedicated floor stands are available

Frequency Response: 35 Hz - 100 KHz
Sensitivity (1W@1M): 90 dB
Nominal Impedance: 4 Ohms
Maximum S.P.L
(Per pair in room): 117.8 dBA
Power Handling (RMS): 250 W
Recommended Amplifier Requirements (RMS): 100 - 250 W
Bass Alignment: Rear Ported HiVe®II technology
Sealed Mid-range TLE®
Mid / H.F Crossover Frequency: 3600 Hz
Bass Low Pass Crossover Frequency: 600 Hz
Drive Unit Complement: 2 x 6.5" long-throw RDT® bass drivers
1 x 4" RDT® mid-range driver
1 x C-CAM® high frequency ribbon transducer
External Dimensions -
Including Fixed Plinth (H x W x D): 998 x 360 x 375 mm
(39 5/16 x 14 3/16 x 14 3/4 inches)
Weight (each) Including Plinth: 33Kg (72.7 lbs)

User's Manual

AVAILABLE IN THESE COLOR FINISHES

Dimensions | Metric :5-1/4" W x 5-1/8" D x 42" H | 13.3 x 13.0 x 106.7 cm
Height with Base | Metric :42-7/8" | 104.5 cm
Driver Complement :One 1" pure aluminum dome tweeter; Two 4-1/2" high definition midrange drivers; Two 4-1/2" high definition bass drivers; Two 4-1/2" pressure coupled bass radiators
Base Dimensions | Metric :8-3/4” W x 8-5/8” D | 22.2 x 21.9 cm
Accessories :Plastic Foot Tippers; Isolation Spikes
Frequency Response :35 Hz – 30 kHz
Impedance :Compatible with 8 Ohms outputs
Sensitivity :91 dB
Recommended Associated Amplifier Power :20 - 225 watts
A/V Receiver Crossover Setting :100 Hz
Inputs :One pair of 5 way binding posts
Enclosure :Aircraft grade extruded aluminum
Available Finishes :Gloss Black
Base :Tempered Glass
Packaging :One to a carton
Weight | Metric :23 lbs | 10.4 kg
Warranty :5 Years

PRICE PER SPEAKER

Specifications