Content |
Centre Channel Speaker with twin 100mm bass drivers and ferro-fluid hf unit to acoustically match and complement any of the 1000i Series. Can be wall mounted by using the 1000CB wall bracket.
1000Ci SpecificationsEnclosure Type | 2-way reflex | Bass Unit (mm) | 2x100 | Treble Unit (mm) | 25 | Frequency Response (±3dB) | 75Hz - 20kHz | Nominal Impedance (Ohm) | 6 | Minimum Impedance (Ohm) | 4.7 | Sensitivity (2.83v@1m) | 89dB | Recommended Amplifier Power | 25 - 100W | Crossover Frequency (kHz) | 2.8 | Effective Volume (litres) | 5.2 | Cabinet Dimensions (HxDxWmm) | 150 x 195 x 425 | Weight (Kg per cabinet) | 5.5 |
|
2 x 5 ¼ ¨ Polymer Composite Cone
with Rubber Surround
1 x 1¨Silk Polymer Dome Tweeter
Amplifier Power 20-180 W/ch
Impedance 8 Ohms
Sensitivity 89dB
Dimensions (cm) 17 x 50 x 22
|
HF Unit: 25mm neodymium tweeter with high dispersion diaphragm. Ferrofluid cooled and damped. Magnetically shielded. Exclusively Profiled.
MF Unit: 110mm mid range driver with 32mm long-throw voice coil, die cast chassis, high power, magnet system and lightweight alloy cone. Magnetically shielded.
LF Unit: 110mm mid/bass driver with 32mm long-throw voice coil, die cast chassis, high power, magnet system and lightweight alloy cone. Magnetically shielded.
Power Handling: 150 watt max
Overall Frequency Response: 55Hz – 23kHz
Sensitivity: 90dB
Impedance: 8 ohms
Cabinet: Real wood veneered. 15mm MDF wrap. Dual chamber. High power, back firing, low turbulence bass reflex port. 22mm front baffle
Terminals: Gold-plated 4-way binding posts
Dimensions: WxHxD 450 x 180 x 297 mm
Weight: (exc packaging) 8kg each
|
Power Handling (RMS / Max.)
75 / 150 watts
Sensitivity (2.8V/1m)
90 dB
Impedance
4 – 8 Ohms
Frequency Response
40 - 34000 Hz
Recommended Amplifier Output
20 - 150 Watts
Dimensions (WxHxD)
420 x 145 x 195 mm
Weight
4.9 kg
|
Driver Complements
Mid/Woofer 2 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Midrange
Tweeter 1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Electrical
Overall Frequency Response 90Hz-31kHz
Lower -3dB Limit 115Hz
Upper -3dB Limit 28kHz
Nominal Impedance 8 ohms
Recommended Amplifier Power 10-125 w/channel
Efficiency 90 dB
Inputs Gold-plated 5-way binding posts
Dimensions
Cabinet Size 4 5/16" H x 16 11/16" W x 3 15/16" D
(10.95cm H x 42.39cm W x 10.00cm D)
Mounting Options keyhole slot; one .25 x 20 threaded insert
Enclosure Type Steel-plate reinforced curved enclsoure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight 4.70 lbs. (2.13kgs)
Shipping unit: each
Total Shipping Weight 5.50 lbs. (2.49kgs)
Speaker Warranty 5 years parts and labor (original purchaser)
|
Power handling (watts): 170 (RMS)
Sensitivity (dB): 90
Nominal impedance (ohms): 8
Magnetically shielded
W x H x D (mm): 480 x 178 x 195
Weight (kg): 9
Frequency response (Hz): 35 - 45,000
Connections: Gold-plated 4mm banana socket/binding posts
Bass port Rear reflex
Drivers: HF: Dual ring-radiator design
LF: 2 x 130mm pressed allow cones with twin Neodymium magnets and long throw voice coil
Supplied accessories: Removable grille
Finish: black ash/ walnut |
Reviews
There are no reviews yet.