Content |
A very compact, active, two-way line array loudspeaker module that delivers extraordinary power handling, clarity, flexibility and great sound in a compact, easy to handle and affordable package.
The 750 Watt Class-D Digipro amplifier module accurately matches the high quality analogue signal input board with precise, complex filter response that result in the natural, detailed reproduction of the best radiating designs.
The NX L23-A is the ideal choice when line array performance is needed and a fast and easy set up is a must.
Features |
---|
750 Watt Digipro digital amplifier | 133 dB max spl | 100 x 15, Wide dispersion constant directivity angle | 12" woofer, high power neodymium 3.5" voice coil | 3 x 1" HF driver, titanium dome, neodymium 1.75" voice coil | PFC power factor correction |
Acoustical Specifications |
---|
Frequency Response -3 dB: | 60 Hz | ÷ 20 kHz | Max SPL: | 133 dB | | Horizontal coverage angle: | 100° | | Vertical coverage angle: | Max 15° | | Compression Driver: | 3 x 1" neo, 1.75" v.c. | | Woofer: | 12" neo, 3.5" v.c. | |
INPUT/OUTPUT SECTION |
---|
Input signal: | bal / unbal | | Input connectors: | Combo xlr-jack | | Output connectors: | xlr | | Input sensitivity: | -2 dBu / +4 dBu | |
PROCESSOR SECTION |
---|
Crossover frequencies: | 1300 Hz | | Protections: | Thermal, rms | | Limiter: | Soft peak limiter | | Controls: | Volume, hf correction cluster size | |
AMPLIFIER SPECIFICATIONS |
---|
Total power: | 750 Watts | | High frequencies: | 250 Watts | | Low frequencies: | 500 Watts | | Cooling: | Convection / foced | | Connections: | Powercon in / out | |
CABINET |
---|
Cabinet Material: | Balitc birch | | Hardware: | Arry side fittings | | Handles: | 2 side | | Pole Mount/Cap: | Yes | | Colour: | Black | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 346 / 13.62 mm/inch | | Width: | 659 / 25.94 mm/inch | | Depth: | 415 / 16.33 mm/inch | | Net Weight: | 28.5 / 62.83 Kg/Lbs |
|
The SR-S4L is a two-way line array speaker ideal for long distance sound transmission and configures a line array by arranging speaker elements vertically close to each other. It can be converted into the bi-amplifier drive system by changing the internal connection. It can be used for high-impedance applications with the installation of the optional MT-S0601 Matching Transformer.
Enclosure | Bass-reflex type | Power Handling Capacity | Continuous program: 600 W (single-amp mode)
Low 240 W, High 240 W (bi-amp mode) | Rated Impedance | 8 Ω (single-amp mode)
Low 8 Ω, High 8 Ω (bi-amp mode) | Sensitivity | 94 dB (1 W, 1 m) | Frequency Response | 70 - 20,000 Hz (when using DP-0206 (option)) | Crossover Frequency | 3,500 Hz | Directivity Angle | Horizontal: 90゜, Vertical: 0゜ (within the range of speaker height) | Speaker Component | Low frequency: 10 cm cone-type × 8
High frequency: 2.5 cm balanced dome-type × 24 | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm
and Neutrik NL4MP × 2 | Finish | Enclosure: MDF, white, paint
Front grille: Punched steel plate, white, acrylic paint | Dimensions | 160 (W) × 895 (H) × 255 (D) mm | Weight | 16 kg | Accessory | Bi-amplifier drive rating label …1, Bi-amplifier drive input indication label …1 | Option | Matching transformer: MT-S0601, Extension plate: SR-EP4,
Flying bracket: SR-FB4, Wall mounting bracket: SR-WB4,
Wall tilt bracket: SR-TB4, Stand adapter: SR-SA4,
Protection pad: SR-PP4, Floor stand: SR-FS4,
Digital processor: DP-0206 |
|
The VRX932LAP is a powered, lightweight, compact 12" two-way line-array speaker system designed for use in arrays of up to five units. VRX932LAP is the ideal choice when line-array performance is needed but the venue size doesn't call for the very long-throw characteristics of larger line-arrays and a fast and easy setup is vital.
Features : | | Specifications : | - Built-in JBL Drivepack® DPC-2 amplifier module designed by Crown provides 1750 Watts of peak Power. DSP based resident input module provides system optimization and EQ functionality.
| - JBL's exclusive neodymium magned Differential Drive® woofer for high-power capacity and light-weight.
| - VRX932LAP features 3 x 2408J Annular Ring Diaphragm HF drivers. The 2408 represents the latest in JBL Professional compression driver design.
| - Constant Curvature waveguide for unprecedented array coherence.
| - Integral rigging hardware for simple connection of enclosures and optional array frame. Dual angle pole socket for aiming flexibility.
| - Array Configuration Selector permist "array shading“.
| | |
Power Rating | : | 1750 Watts Peak
875 Watts Continuous |
| Frequency Range | : | 57 Hz - 20 kHz
(-10 dB) |
| Dimensions
(H x W x D) | : | 349 mm x 597 mm x 444 mm
(13.75 in x 23.5 in x 17.5 in) |
| Frequency Response | : | 75 Hz - 20 Hz
(+/-3db) |
| Maximum Peak Output | : | 136 dB SPL at 1m |
| Coverage Pattern | : | 100 x 15 nominal |
| DPC-2 Output as (Continuous IED shaped pink noise into rated load impedance) | : | LF: 750 Watts, HF: 125 Watts |
| DPC-2 Output Sectoin | : | LF: Dual-Bridged Technology™, Class D |
| Autio Input Connector | : | XLR with loop through |
| LF Driver | : | 1 x JBL 2262FF 305 mm (12 in) neodymium magnet |
| HF Driver | : | 3 x JBL 2408J, 38 mm (1.5 in) |
| User Controls | : | Input Attenuator (0-16 dB) |
| Signal Processings | : | DSP based, resident in Input Module |
| AC Power Operating Range | : | 90-132 VAC or 216-264 VAC, 50/60 Hz |
| AC Input Connector | : | Neutrik PowerCon (NAC 3MPA) |
| AC Loop Through Connector | : | Neutrik PowerCon (NAC 3MPB) |
| AC Current Requirements | : | 6A per system at 120V, 3A per system at 240V |
| Enclosure | : | 25/15 mm, 11-ply birch plywood |
| Suspension / Mounting | : | Optional VRX-AF line array frame kit, 10mm forged eyebolts or internal dual angle 36mm pole mount cup for pole or tripod mounting |
| Finish | : | Black DuraFlex™ finish |
| Grille | : | Powder coated, black, 16-gauge perforated steel with with acoustically transparent foam |
| Net Weight | : | 24 kg (52 lb) |
| Optional Accessories | : | VRX-AF: Suspension array frame | | |
|
The SR-C15B Sub-woofer system is designed to be used in conjunction with the SR-C8L or SR-C8S Line Array Speaker. Recommended digital processor is the DP-0206 (optional).
Enclosure | Bass-reflex type | Power Handling Capacity | Continuous program: 450 W | Rated Impedance | 8 Ω | Sensitivity | 93 dB (1 W, 1 m) | Frequency Response | 40 - 400 Hz (when driven with the optional DP-0206's recommended parameters) | Crossover Frequency | 125 Hz (when driven with the optional DP-0206's recommended parameters) | Speaker Component | 38 cm (15“) cone-type | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm (0.48“)
and Neutrik NL4MP × 2 | Finish | Enclosure: Plywood, black, urethane paint
Front grille: Punched steel plate, black, paint | Dimensions | 526.6 (W) × 594.8 (H) × 550 (D) mm (20.73" × 23.42" × 21.65“) | Weight | 41 kg (90.39 lb) | Accessory | M8 connection bolt …4 | Option | Rigging frame: SR-RF8
Digital processor: DP-0206 |
|
The SR-C8S is a 2-way Line Array Speaker featuring wave front control technology which creates a sound field with high sound clarity and uniform sound pressure. Recommended digital processor is the DP-0206 (optional). It can be converted into the bi-amplifier drive system by changing the internal connection.
Enclosure | Bass-reflex type | Power Handling Capacity | Continuous program: 360 W (single-amp mode)
Low: 360 W, High: 180 W (bi-amp mode) | Rated Impedance | 16 Ω (single-amp mode)
Low: 16 Ω, High: 16 Ω (bi-amp mode) | Sensitivity | 98 dB (1 W, 1 m) (single-amp mode)
Low: 95 dB (1 W, 1 m), High: 110 dB (1 W, 1 m) (bi-amp mode) | Frequency Response | 65 - 20,000 Hz (when driven with the optional DP-0206's recommended parameters) | Crossover Frequency | 1,600 Hz (when driven with the optional DP-0206's recommended parameters) | Directivity Angle | Horizontal: 110゜, Vertical: 15゜ | Speaker Component | Low frequency: 20 cm (8) cone-type“
High frequency: Wave front control horn 110゜ (horizontal) × 15゜ (vertical)
+ compression driver × 2 | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm (0.48)“
and Neutrik NL4MP × 2 | Finish | Enclosure: Plywood, black, urethane paint
Front grille: Punched steel plate, black, paint | Dimensions | 526.6 (W) × 293 (H) × 294 (D) mm (20.73 × 11.54" × 11.57“) | Weight | 16 kg (35.27 lb) | Accessory | M8 connection bolt …4 | Option | Cluster bracket: SR-CL8
Rigging frame: SR-RF8
Tilt joint bracket: SR-TP8
Digital processor: DP-0206 |
|
The VT4881A is designed to deliver high quality sound reinforcement of VLF (Very Low Frequency) musical information for a variety of applications including concert audio and theatrical presentations of all types.
Features : | | Specifications : | - Advanced technology component: Differential Drive®, dual voice coil, Direct Cooled™ cone transducer.
| - Independently accessible voice coils, enabling external parallel or series wiring.
| - Advanced construction techniques and hybrid materials provide exceptionally rigid, lightweight enclosure.
| - Rugged DuraFlex™ exterior finish; weatherized components Integrated S.A.F.E.™ suspension system: premium heat-treated alloys provide high-strength, reliable hanging arrays.
| - For ground-stacked or suspended applications in stand-alone arrays or in combination with other VERTEC® system products.
| | |
Frequency Range | : | 25 Hz - 160 Hz (-10dB) |
| Frequency Response | : | 34 Hz - 125 Hz (± 3 dB) |
| Continuous Power Rating | : | 2000W |
| Sensitivity | : | 91 dB, 1W / 1m (2.83 Vrms at 3.3 ft) |
| Nominal Impedances | : | 8 ohm |
| Dimensions (W x H x D) | : | 787 mm x 569 mm x 654 mm
(31 in x 22.4 in x 25.8 in) |
| Weight | : | 50.4 kg (111 lb) | | |
|
Reviews
There are no reviews yet.