ADAM A77X Active Studio Monitor 100W

1,175.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
PRICE PER UNIT A revolutionary formula: 2 x 7 = 77 In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line. The brand new A77X, due to its outstanding features, might become a true game […]

 

Read more

PRICE PER UNIT

A revolutionary formula: 2 x 7 = 77

In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.

The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.

Driver technology

Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.

The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Review samples:

“… a refreshing change“
“… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers.” AUDIO MEDIA magazine / February 2012

“… wide and spacious soundstage with solid left/right imaging“
“… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb.” MusicTech magazine / April 2012

Subwoofer
Number 1 / 1
Basket Ø 7″ (175 mm) / 7″ (175 mm)
Voice coil Ø 1.5″ (38 mm) / 1.5″ (38 mm)
Cone material Carbon / rohacell / glass / Carbon / rohacell / glass
Tweeter
Number 1
Type X-ART
Diaphragm area 4 inch² (2420 mm²)
Equiv. Diaphragm Ø 2″ (56 mm)
Velocity transform ratio 4:1
Diaphragm weight 0.17 g
Built-in Amplifiers
Subwoofer 1
Type PWM
Amp. power RMS / music 100 W / 150 W
Subwoofer 1
Type PWM
Amp. power RMS / music 100 W / 150 W
Tweeter 1
Type A/B
Amp. power RMS / music 50 W / 75 W
Control panel
Input Sensitivity -∞ to +14 dB
High Shelf EQ > 5 kHz ±6 dB
Low Shelf EQ ±6 dB
Tweeter gain ±4 dB
Input connectors
Analog XLR / RCA
Location Rear
General data
Panel Front
Frequency response 38 Hz – 50 kHz
THD 90dB/1m > 100 Hz ≤0.5 %
Long term output ≥114 dB
Max. peak ≥122 dB
Crossover frequencies 400 / 3000 Hz
Input impedance 30 KOhm
Weight 28.2 lb (12,8 kg)
Magnetically shielded Optional
Height x Width x Depth 9.5″ (235 mm) x 21″ (530 mm) x 11″ (280 mm)
Warranty 5 Years
 
Weight 13.00 kg

Reviews

There are no reviews yet.

Be the first to review “ADAM A77X Active Studio Monitor 100W”

Your email address will not be published. Required fields are marked *

Quick Comparison

ADAM A77X Active Studio Monitor 100W removeADAM S3X-H Active Studio Monitor 250W removeReloop ADM-5 ACTIVE STUDIO SPEAKER 30W PAIR removeEDIROL DM-2100 2.1 SYSTEM 2 SATELLITE 15W 1 SUB 50W removeADAM S1X Active Studio Monitor 200W removeADAM A8X Active Studio Monitor 150W remove
NameADAM A77X Active Studio Monitor 100W removeADAM S3X-H Active Studio Monitor 250W removeReloop ADM-5 ACTIVE STUDIO SPEAKER 30W PAIR removeEDIROL DM-2100 2.1 SYSTEM 2 SATELLITE 15W 1 SUB 50W removeADAM S1X Active Studio Monitor 200W removeADAM A8X Active Studio Monitor 150W remove
Image
SKUA77XS3XH040050DM-2100S1XA8X
Rating
Price 1,175.00 incl. GR VAT 2,435.71 incl. GR VAT 155.00 incl. GR VAT 378.80 incl. GR VAT 930.00 incl. GR VAT 1,045.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

PRICE PER UNIT

A revolutionary formula: 2 x 7 = 77

In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.

The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.

Driver technology

Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.

The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Review samples:

“… a refreshing change“
"… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012

“… wide and spacious soundstage with solid left/right imaging“
"… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012

Subwoofer
Number1 / 1
Basket Ø7" (175 mm) / 7" (175 mm)
Voice coil Ø1.5" (38 mm) / 1.5" (38 mm)
Cone materialCarbon / rohacell / glass / Carbon / rohacell / glass
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Subwoofer1
TypePWM
Amp. power RMS / music100 W / 150 W
Subwoofer1
TypePWM
Amp. power RMS / music100 W / 150 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
LocationRear
General data
PanelFront
Frequency response38 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥114 dB
Max. peak≥122 dB
Crossover frequencies400 / 3000 Hz
Input impedance30 KOhm
Weight28.2 lb (12,8 kg)
Magnetically shieldedOptional
Height x Width x Depth9.5" (235 mm) x 21" (530 mm) x 11" (280 mm)
Warranty5 Years

 

PRICE PER UNIT

 

S3X-H - Yes, even better

The S3A is one of ADAMʼs most famous models and is found in many of the most prestigious recording studios all over the world. The successor of this world famous model is the S3X-H, a monitor second to none within its size and price point.

Unlike the S3A, the new X-model incorporates a 4” HexaCone-midrange as part of the redesigned construction to further improve the musically most important midrange. This new design provides more detail with improved radiation characteristics while presenting a musically coherent sound.

To produce deep, tight bass both woofers now work within the same frequency range and radiate symmetrically. This allows for a problem free installation in any multi-channel application.

Reviews: "...the monitor reference...”

Due to the outstanding reputation of its predecessor, it was to be expected that the S3X-H would be reviewed with the most critical of all ears. Here are some samples (complete reviews can be found here):

“The S3X-H convinces all along the line. ADAMs new member is all but just an improvement of a successful monitor. With a new loudspeaker design and painstaking tuning it is a first-class control tool in any studio. From now on, the monitor reference in the Professional audio-studio is called S3X-H.” (Professional audio, 09/2009)

“[...] anyone seeking an uncompromised solution to studio monitoring should add these to your short list of products to consider.” (MIX, 12/2009)

“The S3A is an amazing unit with some excellent technologies, and ADAM hasnʼt just built on this to give us the S3X, but has built something new and exciting with what it knows so well. The sound has been opened up in a whole new way that I believe consistently delivers more reliable results outside of your studio. These are reference monitors, and as they make their way into studios they will become part of the standard called ʽmusic productionʼ. The S3X radiates sound into the room with depth, accuracy, and clarity in the way you need it to be with comfort and ease. These are monitors that need to be heard.” (Audio Media, 09/2009)

Woofer
Number2
Basket Ø7.5" (186 mm)
Voice coil Ø2" (50 mm)
Cone materialHexaCone
Midrange
Number1
TypeCone driver
Basket Ø4.5" (116 mm)
Voice coil Ø1" (25 mm)
Cone materialHexaCone
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Woofer2
TypePWM
Amp. power RMS / music250 W / 350 W
Midrange1
TypePWM
Amp. power RMS / music250 W / 350 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 100 W
Control panel
Input Sensitivity (coarse)-20 to +8 dB (4 dB steps)
Input Sensitivity (fine)-1.5 to +2 dB (0.5 dB steps)
EQ 80 Hz0 to +6 dB (1 dB steps)
High Shelf EQ > 6 kHz±4 dB (1 dB steps)
Low Shelf EQ ±4 dB (1 dB steps)
Tweeter gain±2 dB (0.5 dB steps)
Input connectors
AnalogXLR
Digital (optional)AES/EBU / SPDIF / word clock
General data
PanelFront
Frequency response32 Hz - 50 kHz
THD > 80 Hz≤0.6 %
Long term output≥116 dB
Max. peak≥126 dB
Crossover frequencies350 / 2800 Hz
Input impedance10 KOhm
Weight43.2 lb (19,6 kg)
Magnetically shieldedOptional
Height x Width x Depth11" (280 mm) x 21" (530 mm) x 12.5" (320 mm)
Warranty5 Years
Delivery contents

Power cord, Manual

 

 

 

 


Features

    Professional 2-way active DJ monitors
    Output: 2x 30 W RMS
    Frequency response: 35 Hz - 20 kHz
    S/N Ratio: > 75 dB
    Impedance: 8 ohm
    Magnetically shielded bass drivers
    Speakers: 13.34 cm (5.25“) bass, 2.54 cm (1“) tweeter



    Technical Data

    Dimensions: 232 x 320 x 180 mm
    Weight: 5.0 kg (per piece)

DM-2100: 2.1-ch Speaker System Features The DM-2100 2.1-ch Speaker System is an affordable way to add accurate reference monitoring with a subwoofer for enhanced bass response. The left and right speakers each offer 15 watts of power, while the 50-watt subwoofer provides a powerful low-end boost. And with 24-bit/96kHz digital inputs, the DM-2100 is perfect for use with Roland/BOSS digital studios and instruments, or with computer systems and more.

  • Affordable 2.1-channel monitoring system with 24-bit/96kHz digital inputs
  • Powered bass reflex speakers with 15 watts per side and flat frequency response
  • Active subwoofer with 50-watt amplifier for increased low end
  • Front-mounted controls convenient located on right speaker
  • Coaxial and optical digital inputs, plus analog inputs (RCA and 1/4-inch type)
  • Sleek black wooden cabinets with magnetic shielding

Rated Output Power50W + 15W + 15WSpeakerSubwoofer: 16cm, Satellite Units: 9.2cmNominal Input LevelLine 1: -10dBu, Line 2: -10dBuInput Impedance18k ohmControlsR Channel: Bass Control Knob, Treble Control Knob, Volume 1 (Digital In/ RCA pin), Volume 2 (1/4” phone), Power Switch, Digital Input Select Switch, Phase SwitchConnectorsR Channel: Line 1 Jack (L, R; RCA pin), Line 2 Jack (L (MONO), R; 1/4” phone), Optical Input Connector, Coaxial Input Connector, Dedicated connector for power control and audio signal, Channel Input Jack (R; RCA pin),
L Channel: Channel Input Jack (L; RCA pin),
Sub Woofer: Dedicated connector for power control and audio signal, Channel Output Jacks (L, R; RCA pin), AC In JackDigital InputSampling Rate 32/44.1/48/96 kHz, D/A Convertor 24 bitsPower SupplyAC117, 230 or 240VAccessoriesSpeaker Cables (RCA pin type), Dedicated Cable for power control and audio signal, Power CableSize and Weight ( Satellite Units )Width130 mm5-1/8 inchesDepth160 mm6-5/16 inchesHeight200 mm7-7/8 inchesWeight

Size and Weight ( SubWoofer )Width240 mm9-1/2 inchesDepth300 mm11-13/16 inchesHeight330 mm13 inches

PRICE PER UNIT

 

S1X

The S1X nearfield monitor delivers high quality sound in a very small cabinet. The S1X has all the critical features of the new SX-Series: the X-ART tweeter in combination with the ADAM designed class A/B amplifier and the HexaCone woofer with optimized magnet/voice-coil systems, driven by premium PWM amplifiers.

The smallest reference speaker

The combined features of crystal clear resolution, tight and precise low-frequency reproduction and the effortless musical reproduction sets this speaker apart from all conventional designs.

The S1X is the first choice in all environments that require high quality within a small space, whether it is a smaller studio, an OB vehicle, or a 5.1 installation.

Woofer
Number1
Basket Ø6" (156 mm)
Voice coil Ø1.5" (37 mm)
Cone materialHexaCone
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Woofer1
TypePWM
Amp. power RMS / music200 W / 280 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 100 W
Control panel
Input Sensitivity (coarse)±10 dB
High Shelf EQ > 6 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR
General data
PanelRear
Frequency response40 Hz - 50 kHz
THD > 80 Hz≤1.5 %
Long term output≥103 dB
Max. peak≥113 dB
Crossover frequencies2200 Hz
Input impedance10 KOhm
Weight13.2 lb (6 kg)
Magnetically shieldedOptional
Height x Width x Depth11.5" (295 mm) x 7" (175 mm) x 10" (260 mm)
Warranty5 Years
Delivery contents

Power cord, Manual


 

 

PRICE PER UNIT

The most powerful AX monitor

With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.

The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.

Cabinet- and bass reflex-construction

Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.

Amplification and controls

With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.

On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.

Review: A8X: a "powerful link" between near- and midfield monitors!

"The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010)

Mid-Woofer
Number1
Basket Ø8.5" (220 mm)
Voice coil Ø1.5" (38 mm)
Cone materialCarbon/Rohacell/Glass Fiber
Tweeter
Number1
TypeX-ART
Diaphragm area4 inch² (2420 mm²)
Equiv. Diaphragm Ø2" (56 mm)
Velocity transform ratio4:1
Diaphragm weight0.17 g
Built-in Amplifiers
Mid-Woofer1
TypePWM
Amp. power RMS / music150 W / 225 W
Tweeter1
TypeA/B
Amp. power RMS / music50 W / 75 W
Control panel
Input Sensitivity-∞ to +14 dB
High Shelf EQ > 5 kHz±6 dB
Low Shelf EQ ±6 dB
Tweeter gain±4 dB
Input connectors
AnalogXLR / RCA
General data
Frequency response38 Hz - 50 kHz
THD 90dB/1m > 100 Hz≤0.5 %
Long term output≥112 dB
Max. peak≥120 dB
Crossover frequencies2300 Hz
Input impedance30 KOhm
Weight28.7 lb (13 kg)
Magnetically shieldedNo
Height x Width x Depth15.5" (400 mm) x 10" (255 mm) x 12.5" (320 mm)
Warranty5 Years
Delivery contents

Power cord, Manual



Weight13.00 kg20.00 kg3.50 kg15.00 kg6.00 kg13.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 13.00 kg
Weight 20.00 kg
Weight 3.50 kg
Weight 15.00 kg
Weight 6.00 kg
Weight 13.00 kg

Recently Viewed Products