Content |
Defender Brochure TÜV report User's manual
Defender Nano LUX Cable Protector 6-channel LUX
- Especially flat, non-slip cable crossover made of black, recyclable polyurethane, wheelchair-compatible
- Highly transparent yellow-tinted lid for use in the dark with light tubes
- Yellow polyethylene lid with high warning effect and secure closure (also available with black lid, item N° 85150BLK)
- Patented, self-cleaning lid hinge
- 6 channels 17 x 18 mm
- Load bearing capacity approx. 2 t / 20 cm²
- Fire resistance class B2 (DIN 4102), DEKRA-certified (DIN 31000, EN 61537)
- Resistant to oil, acids, solvents, and petrol
- Dimensions 100 x 28 x 3.2 cm; Weight 4.37 kg
- Reliable protection for cables and personnel for indoor and outdoor use
- Not suitable for road traffic.
- End ramps for secure cable insertion and removal as accessories
The ultimate solution for protecting your cables and for preventing people from tripping. The innovative cable crossovers from the Defender LUX Series have highly transparent, yellow-tinted lids, where LED light tubes can be inserted parallel to cables and other pipes. Defender LUX cable crossovers have been developed in collaboration with event organisers and operators of large halls and festival venues according to the latest state-of-the-art technology and also ensure the highest possible level of safety and visibility in the dark, both indoors and outdoors. LED light tubes from the Defender Series are available as separate accessories. For more information, please refer to our price list for Defender LUX cable crossovers and light tubes, or contact your Defender representative directly.
Cable Protector 6 Channels
Defender® NANO cable crossovers are particularly flat and are easy to cross with a wheelchair. They are suitable for a wide range of indoor and outdoor applications and are available with either a yellow or black lid. These cable crossovers boast 6 cable channels for neat, orderly cable routing, T-connectors and a load capacity of 2 tonnes on an area of 20 x 20 cm, and besides pedestrian traffic, they also allow accommodate driving with light-duty vehicles, trolleys and - thanks to their flat profile - even forklift trucks and lift trucks. Separately available end ramps (male/female) ensure safe insertion and removal of cables. Defender NANO cable crossovers can be used in carnival events, trade shows, exhibitions, shopping centres and storage facilities as well as in theatres, studios and TV stations. Not suitable for road traffic.
Defender LUX cable crossovers can be used with commercially available light tubes. Light tubes with a so-called neon effect are especially recommended since the individual LEDs are less visible and this provides for particularly homogeneous lighting. For outdoor use, please mind the appropriate IP classification of the light tube. The use of LED strips and other unidirectional light-emitting products or fairy lights is not recommended.
Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text. Feel free to contact us for more information.
Product type
Cable Protectors
Type
6 Channels
Length
1000 mm
Width
280 mm
Height
32 mm
Channels
6
Width channel 1
17 mm
Height channel 1
18 mm
Width channel 2
17 mm
Height channel 2
18 mm
Width channel 3
17 mm
Height channel 3
19 mm
Width channel 4
17 mm
Height channel 4
19 mm
Width channel 5
17 mm
Height channel 5
18 mm
Width channel 6
17 mm
Height channel 6
18 mm
Material
polyurethane
Max. load
ca. 2t on a surface area of 20 x 20 cm
Chemical resistance
acid-resistant , oil-resistant , petrol-resistant
Hardness range
88 ± 4 Shore
Fire protection class
B2
Temperature range
-30 to + 60 °C
Weight
4,37 kg
Special feature
DEKRA-certified
|
- 90° curve for Defender Office
- Colour: Jellow
- Channels: 4
- Channels: 10 mm, 12 mm, 12 mm, 10 mm
- Material: Polyurethane
- Fire protection classification: B1
Technical Drawing - Defender Office [429,2 KB]
DEKRA Certificate [3,70 MB]
Users Manual - Defender Series [19,77 MB]
|
Rubber matting cable cover - 10m x 1m roll Fine-grooved rubber mat, black, SBR quality, 3 mm thick, width 100cm, length 10m, non-slip, resilient covering for all high traffic areas, weather proof, lies flat, coarsely patterned underside, ideal for protecting cables of all types, matting can be trimmed to the desired size.32.9 kg/Piece |
Defender Office BLACK
Cable Duct 4-channel black
Data Sheet
Dekra Certificate
Technical Drawing
Defender Brochure
User's manual
- non-slip, ultra-flat cable protector made of recyclable polyurethane for indoors
- zigzag connector system, pre-drilled mounting holes, cutting guides for shortening
- 4 channels: 2 channels each 10 x 10 mm and 12 x 12 mm
- complies with German workplace accident prevention regulations (§ 3 A1 ArbStättV)
- fire resistance class B2 (DIN 4102), DEKRA-certified (DIN 31000, EN 61537)
- resistant to oil, acids, solvents, and petrol
- dimensions 87 x 12 x 2 cm; Weight 1.24 kg
- reliable protection for cables and personnel
- available in black (Item No. 85160), grey (Item No. 85160GREY) and yellow (Item No. 85160YEL)
- Curves and end ramps for flexible cable protection are available as accessories
Office black
4 Mini Channels - Indoor & Design Solution Available with a choice of black, grey and yellow colors the Defender® OFFICE cable protection system is the elegant solution for secure pedestrian traffic in conference facilities, exhibitions, public buildings, retail outlets, shopping malls, trade shows and offices. Featuring straight, 90° and end ramps with cutting guides for length adjustment, zigzag connection and bolt holes for ground fixing the Defender® OFFICE system provides versatile cable routing while preventing tripping hazards.
Product type
Cable Protectors
Type
4 Channels
Length
870 mm
Width
120 mm
Height
21 mm
Channels
4
Width channel 1
10 mm
Height channel 1
10 mm
Width channel 2
12 mm
Height channel 2
12 mm
Width channel 3
12 mm
Height channel 3
12 mm
Width channel 4
10 mm
Height channel 4
10 mm
Material
polyurethane
Max. load
Office crossover
Fire protection class
B1
Weight
1,24 kg
Special feature
DEKRA-certified
|
Defender III cable crossover 45 degree curve |
Technical drawing - 85200 [219,8 KB]
DEFENDER Laser engraving requirements [289,3 KB]
DEKRA Certificate [3,70 MB]
Users Manual - Defender Series [19,77 MB]
Small but sturdy. Light, professional and universally applicable, with the familiar black and yellow design. The new Defender Mini meets every expectation for professional cable protection, expanding the Defender series with a very light (only 5 kg!), compact cable crossover, capable of supporting vehicle traffic.
Featuring three cable ducts and a cable cross-section of 35 mm², with an overall height of 48 mm, although used primarily indoors, this crossover can readily support car traffic, due to the load-bearing capacity of more than 2 tons.The bottom of the Defender Mini has a non-slip surface, to ensure an optimal grip on the widest variety of surfaces. Like all of the Defender series crossovers, the Defender Mini is resistant to oils, acids, and petrol, and has a patented self-cleaning hinged closure.
- Basic module with approved and patented interlocking lid (EU Patent No.: EP1366550)
- Length: 100 cm
- Width: 29 cm
- Height: 4.8 cm
- Channels: 3
- Width Channels: 35 mm
- Height Channels: 30 mm, 35 mm, 30 mm
- Material: PU (polyurethane)
- Shore A hardness: 88 ± 4
- Flammability class: B2
- Operating temperature: -30°C to +60°C
- Load-bearing capacity: approx. 2 tons, for a surface area of 20 cm x 20 cm
- DEKRA certified - Certified product safety
- Weight 4,65 Kg
Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text.
Feel free to contact us for more information.
|
Reviews
There are no reviews yet.